![]() |
#1 |
Zealot
![]() Posts: 122
Karma: 30
Join Date: May 2009
Location: Warrenton, VA
Device: Sony PRS-505 (silver), IPad 3G 64GB
|
How well does Calibre co-reside with other library managers?
Hi all, apologies if this is covered in another thread.
I thought I saw somewhere that there might be issues if Calibre is used along with the Sony library application and also perhaps with respect to the use of the Adobe Digital Editions library manager on a Mac. As of right now, I have installed the Sony software on a VMWare image (I have a Mac, running Windows 7 and Windows XP on VMWare Fusion images), and it works fine - I have downloaded and installed five books. My next step is to try ADE (preferably the Mac version, but if that is an issue, I can always use a Windows version on Fusion) - and I also recall reading of problems when authorizing your device on a Windows copy of ADE - and then following that up by trying to use a Mac version. Is this also a potential roadblock? (Sorry, I know that is not really a Calibre question - but read on, please). And then finally (this is how this concerns Calibre), I will install and learn Calibre - which may end up as my preferred library manager - assuming I get the hang of it. ![]() Will Calibre have any compatibility issues, given I will have already installed and loaded books from Sony's library manager and also from ADE's manager? I will be using Sony for content from their site, will be using ADE for library books (DRM and non-DRM) and will be using Calibre to convert books from fictionwise or Books on Board which are available in mobi, but not available in lrf. Any word on potential pitfalls would be greatly appreciated! Thanks, -- Rique ![]() |
![]() |
![]() |
![]() |
#2 |
zeldinha zippy zeldissima
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 27,827
Karma: 921169
Join Date: Dec 2007
Location: Paris, France
Device: eb1150 & is that a nook in her pocket, or she just happy to see you?
|
i have all three installed (on a pc) although i only use the sony software to preview books from time to time and see how they will display on a sony. i use ade to check epubs or to download drm-ed epubs. i use calibre for all my library management, exclusively. i've not had any problems with compatibility (i've never bought anything from the sony store, however). i believe there used to be a problem having the sony driver installed twice (once with sony soft and once with calibre) but this was only for the 500 ; i don't think there's a problem with the 505 and later, possibly because they mount as external usb drives and don't need a particular driver to access them.
|
![]() |
![]() |
Advert | |
|
![]() |
#3 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 1,101
Karma: 4388403
Join Date: Oct 2007
Device: Palm>Ebookman>IPaq>Axim>Cybook>Kndl2>IPAD>Kndl3SO>Voyager>Oasis
|
I'm not sure what you mean in terms of compatibilty.
You need to be aware that Calibre creates its own directory structure in order to manage the books it catalogs. It first creates folders for each author. Then within the author folder it creates a folder for each book title. When you 'add' a book to calbre it leaves the original book where it is and then creates a new copy and places it in the proper calibre folder hierarchy. Now, there is nothing special about these folders. Using Windows you can browse to the folders on your computer and see the documents with no problem. However, this means that you can't read the same physical book collection from two different library software programs. Each program would catalog their own set of books. If you need to share a book, then Calibre would copy it from the original place into its directory structure. Furthermore, any changes that affect the physical file would need to occur in two places. |
![]() |
![]() |
![]() |
#4 | ||||||
Zealot
![]() Posts: 122
Karma: 30
Join Date: May 2009
Location: Warrenton, VA
Device: Sony PRS-505 (silver), IPad 3G 64GB
|
@emellaich, thanks for the thoughtful and helpful reply! Naturally, your answers give birth to more questions.
![]() Quote:
Meaning, it creates its own directory structure within the desktop library? Does that have any effect on the directory structure within the Sony Reader? Quote:
Quote:
Quote:
Quote:
Quote:
To clarify, I will not be maintaining the same books in differing libraries. I will have a set of books from Sony, a set of books from ADE, and a set of books from Calibre (acquired from Fictionwise and other sources requiring a conversion). My primary concern is the effect (or lack of same) to the Reader. Your info is very helpful - however, I am not certain yet as to the effect of all of these different libraries to the Reader - I assume the Reader will "handle" it all? Thanks for all of your time and trouble! ![]() ![]() [edited a typo - RS] Last edited by Rique; 05-25-2009 at 01:41 AM. |
||||||
![]() |
![]() |
![]() |
#5 | |
Mommy of Many Interests
![]() ![]() ![]() ![]() ![]() ![]() Posts: 139
Karma: 660
Join Date: Sep 2008
Location: Wake Forest, NC
Device: Kindle DX, Sony PRS-505, Cybook Gen3
|
Quote:
In terms of the coexistence of Calibre, ADE, and Sony Library, I run all three on the PC and my Sony is very happy working with any of them. I don't ever have all 3 (or any combination of the 3) open at the same time... don't know if that would cause problems or not. However, for example today, I downloaded an ePub book and loaded it onto my Sony via ADE. I also used Calibre to convert a PDF to LRF and moved that to my Sony. I also opened Sony library software and did some moving around within there and everything worked just fine. Hope this helps and answers your questions somewhat. Best regards, |
|
![]() |
![]() |
Advert | |
|
![]() |
#6 | |||||
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 1,101
Karma: 4388403
Join Date: Oct 2007
Device: Palm>Ebookman>IPaq>Axim>Cybook>Kndl2>IPAD>Kndl3SO>Voyager>Oasis
|
I can see I created more confusion than help, sorry -grin.
I am answering in regard to Windows because its what I know. So anyway you add a book to Calibre by pushing the "Add books" button. This pulls up a Windows dialog box and you browse to a location on your disk and select the book(s) you want to add to the library. When you add a book, Calibre does not touch the copy of the book you add. The file stays unchanged on the disk at the location where it was. Calibre copies the file into a new directory. This new directory is just another location on the hard disk. You originally tell Calibre which directory to use for its library. Then it places all of its files in sub-directories below that directory. Since these are all standard Windows directories you can browse to them use the windows file manager. If the original file was in a Sony or mobipocket library it is still there and it is not touched. Quote:
Quote:
Quote:
Quote:
Yes Quote:
However, if any of your other book managers try to synch things then you may have more of a mess. They may try to copy in any books that are not already in their software. |
|||||
![]() |
![]() |
![]() |
#7 | |
Zealot
![]() Posts: 122
Karma: 30
Join Date: May 2009
Location: Warrenton, VA
Device: Sony PRS-505 (silver), IPad 3G 64GB
|
@emellaich, aha!
(that was the sound of a genuine "aha" moment!). Now I see what you were getting at. ![]() Quote:
![]() Thanks again and sorry for the typo of your nick... I went back and fixed it. -- Rique ![]() |
|
![]() |
![]() |
![]() |
#8 | ||
Zealot
![]() Posts: 122
Karma: 30
Join Date: May 2009
Location: Warrenton, VA
Device: Sony PRS-505 (silver), IPad 3G 64GB
|
Quote:
![]() Quote:
I think I have about 9 books loaded so far - currently reading the full text (not the excerpt) of "Team of Rivals". Thanks again, -- Rique ![]() |
||
![]() |
![]() |
![]() |
#9 |
Wizzard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 1,402
Karma: 2000000
Join Date: Nov 2007
Location: UK
Device: iPad 2, iPhone 6s, Kindle Voyage & Kindle PaperWhite
|
The only issue with using them at the same time is that both Calibre & the Sony software have to update the same file on the Reader in order to manage collections, so to be safe, you should probably only use one to write to the device per 'connect-disconnect' session.
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Calibre + BibDesk (or other reference managers) | zimmerleut | Calibre | 6 | 05-24-2012 06:09 PM |
eReader tools, Managers and Converters | jlg432 | Ectaco jetBook | 1 | 08-11-2010 01:29 AM |
How to direct Library books to Calibre instead of Sony Reader Library | onebookie | Calibre | 3 | 07-19-2010 11:31 AM |
Compare calibre library with ereader library | Danthier | Calibre | 3 | 06-15-2010 11:58 PM |
2 x calibre library | gragra | Calibre | 0 | 10-04-2009 04:06 AM |