04-30-2009, 06:22 PM | #1 |
Junior Member
Posts: 7
Karma: 10
Join Date: Mar 2009
Device: sony 505
|
Need help please - how to use the universal flasher
I need help. Someone gave this advice and I haven't the slightest idea of what he means.
So please help me to understand how to use the universal flasher in order to to remove the current Sony Reader PRS 505 firmware from my computer, then proceed in 'flashing' the internal memory so I can reinstall the latest 505 firmware. He says it could fix my problem of my computer not reading correctly the Sony Reader - it loads improperly. He say's it could fix my problems and is quite easy and harmless to perform. But for me its not so easy. The he says go to this page----> https://www.mobileread.com/forums/showthread.php?t=26831 .............which contains the zip files for the re-install ORIGINAL POST BELOW Can someone help me out please? I have a Sony Reader PRS 505 and I am using Vista in a HP Laptop. It always worked alright until recently. Now the computer doesn't seem to be able to recognize and read the Reader properly. When I open the Library it won't load unless I unplug the Reader from the USB connection. Then it opens and I re-connect the Reader and it takes all of about 20 minutes to boot correctly. When it does its not always reliable. But before it always loaded fine when the Reader was plugged in - incidentally - Its always charged up when I make my attempts. This didn't happen when I first started using the unit. All opened well and it was nice and fast - no waiting - and no wondering if it was going to open. I did load in the new update from online that allows for better access to PDF files etc. . And I am quite certain the battery was charged fully when I did so.......would that really cause a problem like this anyway? I re-loaded the Library software from the disc and on line - and prior to the re-loading I dumped the programs - many many times in an effort to resolve the problem.............Any suggs out there? Thank you very much Philip In Philadelphia........... Last edited by de_Genova; 05-01-2009 at 09:28 AM. |
05-01-2009, 08:14 AM | #2 |
Wizzard
Posts: 1,402
Karma: 2000000
Join Date: Nov 2007
Location: UK
Device: iPad 2, iPhone 6s, Kindle Voyage & Kindle PaperWhite
|
The easier way to use the Universal Flasher is via PRSCustomizer, details for which are in this thread - https://www.mobileread.com/forums/showthread.php?t=27177
However, I'd suggest not doing that until you're reader is working correctly - instead, I'd suggest trying a reflash of the 'official' flasher. The issue you'll have will be that it'll say it's up to date, so what you first need to do is to rename the .exe to .zip, unpack it, edit the file 'prs505/eBookUpdater/assets/updaterAssets/PRSVersion.dat' so that 110018040 reads 110018041, re-zip, rename to .exe and then run it. |
Advert | |
|
05-01-2009, 09:26 AM | #3 |
Junior Member
Posts: 7
Karma: 10
Join Date: Mar 2009
Device: sony 505
|
G.............thank you very much.............you seem quite the expert eh? I will download it now and see how it takes me..................PD
|
05-01-2009, 03:19 PM | #4 |
Zealot
Posts: 125
Karma: 24
Join Date: Jan 2009
Device: prs 505
|
So, your reader is working properly again ?
|
05-01-2009, 05:26 PM | #5 |
Junior Member
Posts: 7
Karma: 10
Join Date: Mar 2009
Device: sony 505
|
WW................Nahhhhh I thought it was OK but not really................
I have to unplug it for it to load.........when I plugit in again the Reader goes into "Not Responding" mode................ But you still haven't answered the questions I asked you...........are you going to? Last edited by de_Genova; 05-01-2009 at 05:34 PM. |
Advert | |
|
05-01-2009, 05:39 PM | #6 |
Junior Member
Posts: 7
Karma: 10
Join Date: Mar 2009
Device: sony 505
|
It booted again
WW..............After waiting about 10 minutes it just booted up and its fine. Any ideas about that? Why would I have to wait so ling for a bootup?
|
05-02-2009, 12:01 PM | #7 |
Zealot
Posts: 125
Karma: 24
Join Date: Jan 2009
Device: prs 505
|
To format "flash" the internal memory:
Get the universal flasher here.... Then...unpack the contents of the archive to the root of your SD card. Plug the flash card into the PRS-505 Press 6 Wait for the PRS-505 to report "Reflashing was successful. Rebooting." Take the flash card out of the PRS-505 Wait for the unit to reboot The unit is now without operating system, now download the latest firmware from sony and update the unit to this firmware. Enjoy |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PRS-500 Problem with universal flasher | gczobel | Sony Reader Dev Corner | 1 | 08-21-2010 08:48 AM |
Universal Flasher for upgraded PRS500 | jimmyzou | Sony Reader | 5 | 07-22-2010 12:47 PM |
Universal Flasher 2.0 with PRS-505 support! | igorsk | Sony Reader Dev Corner | 205 | 05-24-2010 07:44 AM |
Universal Flasher run script | Jamp | Sony Reader Dev Corner | 1 | 08-26-2009 09:34 AM |
Universal Flasher: .so file question | billyfred | Sony Reader Dev Corner | 4 | 06-27-2009 12:05 AM |