02-02-2024, 03:23 PM | #1 |
Member
Posts: 12
Karma: 10
Join Date: Jan 2021
Device: Kindle 3
|
Quite dead nook classic. Please help
Hello guys,
You are my last hope. I have old Nook BNRV100 which is dead. Charging light is working. That is all. Nothing on a screen. It is newer version with nand memory instead of sd card. I have connected through the serial port. That are two options I get. U-Boot 1.1.6 (Aug 2 2010 - 23:02:38) for SMDK6410 CPU: S3C6410@532MHz Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode) Board: SMDK6410 DRAM: 256 MB Flash: 0 kB SD/MMC: Movi_set_capacity ofsinfo.last(0x3b9ffe) ofsinfo.bl1(0x3b9fee) ofsinfo.env(0x3b9fce) ofsinfo.bl2(0x3b9dce) ofsinfo.kernel(0x3b7dce) ofsinfo.rootfs(0x3b3dce) hsmmc_set_gpio() movi_init: hsmmc_reset() hsmmc_init() HM_CLKCON (0x2c) = 0x4003 HM_CONTROL2(0x80) = 0xc00f4120 HM_CONTROL3(0x84) = 0x00008080 HM_HOSTCTL(0x28) = 0x00 1909 MB (moviNAND) HM_HOSTCTL(0x28) = 0x00 HM_CLKCON (0x2c) = 0x0103 HM_CONTROL2(0x80) = 0xc00f4120 HM_CONTROL3(0x84) = 0x00008080 *** Warning - bad CRC or moviNAND, using default environment In: serial Out: serial Err: serial hsmmc_set_gpio2() for 2nd SD card. hsmmc_init2() HM_CLKCON (0x2c) = 0x4003 HM_CONTROL2(0x80) = 0xc00f4120 HM_CONTROL3(0x84) = 0x00008080 969 MB real card size 3c8c0000 HM_CLKCON (0x2c) = 0x0103 HM_CONTROL2(0x80) = 0xc00f4120 HM_CONTROL3(0x84) = 0x00008080 2nd SD card was detected! movi_get_size: 3c8c0000 mfg img checksum 00000000 expected checksum 8274ba05 Manufacturing section checksum verification failed, boot as usual U-boot...<0>„<0><0><0><0> „ B<0><0><0>OK U-Boot 1.1.6 (Aug 2 2010 - 23:02:38) for SMDK6410 CPU: S3C6410@532MHz Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode) Board: SMDK6410 DRAM: 256 MB Flash: 0 kB SD/MMC: Movi_set_capacity ofsinfo.last(0x3b9ffe) ofsinfo.bl1(0x3b9fee) ofsinfo.env(0x3b9fce) ofsinfo.bl2(0x3b9dce) ofsinfo.kernel(0x3b7dce) ofsinfo.rootfs(0x3b3dce) hsmmc_set_gpio() movi_init: hsmmc_reset() hsmmc_init() HM_CLKCON (0x2c) = 0x4003 HM_CONTROL2(0x80) = 0xc00f4120 HM_CONTROL3(0x84) = 0x00008080 HM_HOSTCTL(0x28) = 0x00 1909 MB (moviNAND) HM_HOSTCTL(0x28) = 0x00 HM_CLKCON (0x2c) = 0x0103 HM_CONTROL2(0x80) = 0xc00f4120 HM_CONTROL3(0x84) = 0x00008080 *** Warning - bad CRC or moviNAND, using default environment In: serial Out: serial Err: serial hsmmc_set_gpio2() for 2nd SD card. hsmmc_init2() HM_CLKCON (0x2c) = 0x4003 HM_CONTROL2(0x80) = 0xc00f4120 HM_CONTROL3(0x84) = 0x00008080 0 MB 2nd SD card was NOT found! First boot is with a upgrade sd card made by nookdevs instructions. I know it is an ancient device but I really hope anyone can help me Is there any option to bring it back to life? Last edited by Fibogreg; 02-03-2024 at 01:23 AM. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Classic Rerooting a Nook Classic 1.4.3? | Shades | Nook Developer's Corner | 3 | 02-09-2023 10:29 PM |
Classic nook classic root | Goatsie666 | Nook Developer's Corner | 1 | 07-10-2015 01:43 PM |
Classic Is my Nook Classic dead? | sneakyspider | Barnes & Noble NOOK | 7 | 02-09-2013 09:11 PM |
Ended Nook Classic | JohnMorris | Flea Market | 2 | 11-14-2012 09:59 AM |
Classic Just Got a Classic Nook | lionel47 | Barnes & Noble NOOK | 30 | 10-29-2010 07:30 PM |