New Kindle Fire Not Recognised

[merlot83]

Saved to main memory is greyed out. Device is recognised by Windows 10.


calibre 6.14 embedded-python: True
Windows-10-10.0.19045-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.19045')
Python 3.10.1
Windows: ('10', '10.0.19045', 'SP0', 'Multiprocessor Free')
Interface language: en_GB
USB devices on system:
(USBDevice(vendor_id=0x46d product_id=0x826 bcd=0x10 devid=usb\vid_046d&pid_0826&rev_0010 devinst=1),
USBDevice(vendor_id=0x46d product_id=0xc534 bcd=0x2901 devid=usb\vid_046d&pid_c534&rev_2901&mi_01 devinst=2),
USBDevice(vendor_id=0x46d product_id=0xc534 bcd=0x2901 devid=usb\vid_046d&pid_c534&rev_2901 devinst=3),
USBDevice(vendor_id=None product_id=None bcd=None devid=usb\root_hub30&vid8086&pida12f&rev0031 devinst=4),
USBDevice(vendor_id=0x46d product_id=0x826 bcd=0x10 devid=usb\vid_046d&pid_0826&rev_0010&mi_02 devinst=5),
USBDevice(vendor_id=0x46d product_id=0x826 bcd=0x10 devid=usb\vid_046d&pid_0826&rev_0010&mi_00 devinst=6),
USBDevice(vendor_id=0x1949 product_id=0x5e1 bcd=0x223 devid=usb\vid_1949&pid_05e1&rev_0223 devinst=9),
USBDevice(vendor_id=0x46d product_id=0xc534 bcd=0x2901 devid=usb\vid_046d&pid_c534&rev_2901&mi_00 devinst=7),
USBDevice(vendor_id=0x424 product_id=0x2514 bcd=0x0 devid=usb\vid_0424&pid_2514&rev_0000 devinst=8))

No disabled plugins
Looking for devices of type: MTP_DEVICE
List of WPD PNP ids:
['\\\\?\\usb#vid_1949&pid_05e1#g001ku0623420df0#{6a c27878-a6fa-4155-ba85-f98f491d4f33}']
MTP device: \\?\usb#vid_1949&pid_05e1#g001ku0623420df0#{6ac278 78-a6fa-4155-ba85-f98f491d4f33}
{'device_version': '1.0',
'friendly_name': '',
'has_bulk_properties': True,
'has_storage': True,
'manufacturer_name': 'Amazon',
'model_name': 'Fire',
'protocol': 'MTP: 1.00',
'serial_number': 'G001KU0623420DF0',
'storage': [],
'type': 'unknown'}
Not a suitable MTP device, ignoring

No suitable MTP devices found

Looking for devices of type: SMART_DEVICE_APP
All IP addresses {'{B80318E1-CBB1-4A38-9CC4-2A70D00664F4}': [{'addr': '192.168.1.12', 'netmask': '255.255.255.0', 'broadcast': '192.168.1.255'}], '{8FF6AA3B-5F64-11ED-959A-806E6F6E6963}': [{'addr': '127.0.0.1', 'netmask': '255.0.0.0', 'broadcast': '127.255.255.255'}]}
No device is connected

Looking for devices...

Devices possibly connected: None

[kovidgoyal]

That device is reporting it has no storage devices available, which is why calibre refuses to connect to it.
This can usually be fixed by rebooting both the device and the computer. Also sometimes faulty/failing
SD cards cause it. If you have an SD card in the device, try removing it. If your device is not in
File transfer mode, you should swipe down from the TOP after plugging it in, tap on the USB notification
and change the USB mode to file transfer.