![]() |
#1 |
Member
![]() Posts: 13
Karma: 10
Join Date: Jul 2024
Location: Buenos Aires, Argentina.
Device: Kindle Paperwhite 11 SE
|
Problem with Calibre 3.48 and Kindle PaperWhite 11 SE
Hello everyone! Nice to meet you and thank you for having me.
I was about to reply to an existing thread, but I encountered a note suggested me that, since it was an old post, started one new. The situation is this: me beloved Kindle Voyage died a few weeks ago ("Device: SE Blank Megrez"), and my wife bought me a Kindle PaperWhite 11 Signature Edition. I'm running Calibre 7.6 at home with no problems, but my office PC runs on Windows 7. For the moment, it is not possible to upgrade Windows and even less likely to ask for a new computer. So Windows 7 is all I got. With Calibre 3.48, of course. What I'd like to know -if you can help me- is if there is a way I can make Calibre 3.48 recognize my new Kindle. I copied the files from Calibre 7.6 at home and brought them here, but I have no idea which file contains the drivers or whatever Calibre uses to recognize devices. I also have no idea if this could work. I know I can use it at home, but I tend to use ir primarily here, so it would be great if you can take the time to tell me how to tweek this 3.48 with the devices database from the 7.6 (or any other solution that allows me to use this new Kindle at word). Thank you very much in advance! |
![]() |
![]() |
![]() |
#2 |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 11,062
Karma: 227343916
Join Date: Jan 2014
Location: Estonia
Device: Kobo Sage & Libra 2
|
While I'm not aware of any method to get Calibre 3.48 recognize a 11th gen. Paperwhite (doesn't mean there isn't one), you don't actually need direct connection with Calibre to get the books on the PW. Use the Save to Disk feature in Calibre to save the books to your chosen location on the local drive and drag them to the documents folder on your Kindle from there.
|
![]() |
![]() |
![]() |
#3 |
Well trained by Cats
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 30,302
Karma: 57979022
Join Date: Aug 2009
Location: The Central Coast of California
Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A
|
Moving a 7.x library to 3.x , 4.x and even 5.x
runs risks. You might have gotten away with it for now, but do NOT try to move back. Not only has the code (and features) evolved, but those in 7.x allow things the earlier versions did not. Some required database changes to store additional info. Is the W7 machine 32 Bit ![]() 64bit: Consider booting Linux on a USB drive or fast stick (no mods to the host if it allows a USB boot) |
![]() |
![]() |
![]() |
#4 | |
Member
![]() Posts: 13
Karma: 10
Join Date: Jul 2024
Location: Buenos Aires, Argentina.
Device: Kindle Paperwhite 11 SE
|
Quote:
The thing is I wanted to keep both my "Kindle" libraries (home and work) syncronized, and if I move a file with Save to Disk (or with Windows Explorer), (There's a "Bussengeist" library where I place books already read and TBR, and then a "Kindle" library where I put only those I have in the Kindle). I guess I'll have to use Calibre only at home... at least until they give me a new PC at work. It's not too bad, I know... it's just that it was nicer to be able to use both. |
|
![]() |
![]() |
![]() |
#5 | |
Member
![]() Posts: 13
Karma: 10
Join Date: Jul 2024
Location: Buenos Aires, Argentina.
Device: Kindle Paperwhite 11 SE
|
Quote:
I didn't move a Calibre library. What I was trying to do is learn in which file Calibre keeps its device data (let's say it's called "devices.something"). Then copy said file from the 7.6 at home (that includes my new Kindle) and replace the old (3.4) devices.somthing in the same folder. I know it would probably not work... but all I'd have to do is to previously backup the whole Calibre folder, and restore it if things didn't work. It doesn't matter that much, anyway, because I won't be using Calibre at work since I can't organize my Kindle from there anymore. |
|
![]() |
![]() |
![]() |
#6 | |
Member
![]() Posts: 13
Karma: 10
Join Date: Jul 2024
Location: Buenos Aires, Argentina.
Device: Kindle Paperwhite 11 SE
|
Thenks for your reply, theducks!
Quote:
Yup... unfortunately, it is. Thank you for this, but the goal was easyness and comfort: if I have to reboot everytime I have a couple of minutes to use Calibre... it would be just unpractical. |
|
![]() |
![]() |
![]() |
#7 |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 11,062
Karma: 227343916
Join Date: Jan 2014
Location: Estonia
Device: Kobo Sage & Libra 2
|
I'm pretty sure this wouldn't work. There have been lots of folks here over the years, asking the same thing, and I have never seen anything like that suggested by the calibre gurus here.
|
![]() |
![]() |
![]() |
#8 |
Well trained by Cats
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 30,302
Karma: 57979022
Join Date: Aug 2009
Location: The Central Coast of California
Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A
|
Think of all the effort needed to make (and deliver) back version compatible device drivers for 3 OS
![]() |
![]() |
![]() |
![]() |
#9 | |
Bibliophagist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 39,079
Karma: 153098470
Join Date: Jul 2010
Location: Vancouver
Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos
|
Quote:
In theory the same could be done for the Kindle driver and older calibre versions but so far the only person I'm aware of who was looking at doing so ended up moving to a new computer and the project got dumped into the bit bucket. As far as I recall, even the first step of backporting the driver from calibre 6.2's Python 3 to Python 2 hadn't been completed. |
|
![]() |
![]() |
![]() |
#10 | |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 11,062
Karma: 227343916
Join Date: Jan 2014
Location: Estonia
Device: Kobo Sage & Libra 2
|
Quote:
|
|
![]() |
![]() |
![]() |
#11 | |
Resident Curmudgeon
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 75,746
Karma: 134321338
Join Date: Nov 2006
Location: Roslindale, Massachusetts
Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3
|
Quote:
|
|
![]() |
![]() |
![]() |
#12 |
Member
![]() Posts: 13
Karma: 10
Join Date: Jul 2024
Location: Buenos Aires, Argentina.
Device: Kindle Paperwhite 11 SE
|
Yes. Thank you all, but I guess JSBWolf is right: I'll have to pause using Calibre at work... at least until they get me a new computer.
Again: thank you very much, Sirtel, theducks, DNSB and JSWolf |
![]() |
![]() |
![]() |
Tags |
calibre, driver, kindle, recognition. |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Kindle paperwhite problem | il Donda | Devices | 2 | 09-28-2021 08:17 AM |
Kindle Paperwhite problem | Gammyleggs | Amazon Kindle | 11 | 04-20-2021 03:52 PM |
Problem: Calibre not seeing newly downloaded books on Kindle Paperwhite | Doc-D | Library Management | 3 | 09-22-2015 04:56 PM |
Problem with calibre-converted books on Kindle Paperwhite 2 | Stridr | Amazon Kindle | 6 | 11-15-2013 02:58 AM |
kindle paperwhite 2 wi-fi problem | wertico | Amazon Kindle | 3 | 11-04-2013 10:01 PM |