Tolino Page 2 After 16.2.0 Update

wobcounter · 04-13-2024, 01:48 PM

Hello :-)

I've been looking for a solution to my problem for over 2 hours now. I tried to update my Tolino to the new firmware. Since then, it only starts up to the Tolino lettering. I tried to reset it in the Recover menu, but an error message appears: Update Failed Status 7. My PC no longer recognizes it when I connect it. I opened it and manually copied the update package to the SD card. Then restarted, but it only starts again up to the Tolino lettering. Unfortunately, I no longer have any guarantee and customer service only pointed me to the website where I can download the update manually. I don't know what I can do now. I found instructions on YouTube on how I can load stock firmware onto the SD card, but only from the Tolino shine 3. Are there other options or solutions so that I can get the Tolino to work again. I would be very happy about your help.

f_coco · 04-28-2024, 02:28 AM

Maybe you can try to flash a third party firmware posted in XDA forum which i think is much better then the original one.
And also you need a twrp img to flash 3rd party firmware or a offical recovery img to flash the offical firmware.
If you have ADB installed on you laptop or desktop, you may try the following steps to restore your offical firmware.
01. Download the latest offical firmware from tolino website.
02. There is a file called recovery.img inside the firmware package. Extract it and put it in the root dir of your C drive.
03. Connect your reader to your computer, turn it off and then press the power button for about 40 seconds. (This should put the reader into fastboot mode.)
04. Using the command: fastboot boot c:\recovery.img to boot the device into recovery mode.
05. you can select recovery system from the setttings. the system will restore a factory firmware automatically.
06. after all is done, restart the device. Your data will be erased during the restoration.

04-13-2024, 01:48 PM	#1
wobcounter Junior Member Posts: 2 Karma: 10 Join Date: Apr 2024 Device: Tolino Page 2	Tolino Page 2 After 16.2.0 Update Hello :-) I've been looking for a solution to my problem for over 2 hours now. I tried to update my Tolino to the new firmware. Since then, it only starts up to the Tolino lettering. I tried to reset it in the Recover menu, but an error message appears: Update Failed Status 7. My PC no longer recognizes it when I connect it. I opened it and manually copied the update package to the SD card. Then restarted, but it only starts again up to the Tolino lettering. Unfortunately, I no longer have any guarantee and customer service only pointed me to the website where I can download the update manually. I don't know what I can do now. I found instructions on YouTube on how I can load stock firmware onto the SD card, but only from the Tolino shine 3. Are there other options or solutions so that I can get the Tolino to work again. I would be very happy about your help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tolino Update 15.2.0 is here	Moonbase59	Tolino	11	12-12-2021 07:18 PM
Update Tolino vocabulary	Goren	Tolino	0	10-06-2019 09:39 AM
Tolino Page & Tolino Page same size?	rcentros	Tolino	6	08-21-2018 04:07 PM
Tolino Shine Update 1.3	hamlok	Andere Lesegeräte	0	11-19-2013 12:34 PM
Tolino - Update 1.2.4. ist da!	hamlok	Andere Lesegeräte	4	10-10-2013 03:40 AM

04-28-2024, 02:28 AM	#2
f_coco Connoisseur Posts: 52 Karma: 10 Join Date: Mar 2015 Device: InkPad	Maybe you can try to flash a third party firmware posted in XDA forum which i think is much better then the original one. And also you need a twrp img to flash 3rd party firmware or a offical recovery img to flash the offical firmware. If you have ADB installed on you laptop or desktop, you may try the following steps to restore your offical firmware. 01. Download the latest offical firmware from tolino website. 02. There is a file called recovery.img inside the firmware package. Extract it and put it in the root dir of your C drive. 03. Connect your reader to your computer, turn it off and then press the power button for about 40 seconds. (This should put the reader into fastboot mode.) 04. Using the command: fastboot boot c:\recovery.img to boot the device into recovery mode. 05. you can select recovery system from the setttings. the system will restore a factory firmware automatically. 06. after all is done, restart the device. Your data will be erased during the restoration.

Advert