Upgraded PRS500 Stuck on Boot Screen

ritoroy · 12-21-2009, 09:11 PM

I received my PRS500 by UPS today, exactly a week after sending it in. As others have observed, everything was packed very well. Unfortunately, upon powering on the unit, it has been stuck on the "Starting up ..." screen for the last several hours. Trying to toggle the power switch and pressing the reset button on the rear has had no effect. I have sent an email to Sony Repair and am awaiting their reply, but in the meanwhile I was wondering if anybody else has had a similar experience after the upgrade and how it was resolved.

JSWolf · 12-21-2009, 09:13 PM

Quote:

Originally Posted by ritoroy

I received my PRS500 by UPS today, exactly a week after sending it in. As others have observed, everything was packed very well. Unfortunately, upon powering on the unit, it has been stuck on the "Starting up ..." screen for the last several hours. Trying to toggle the power switch and pressing the reset button on the rear has had no effect. I have sent an email to Sony Repair and am awaiting their reply, but in the meanwhile I was wondering if anybody else has had a similar experience after the upgrade and how it was resolved.

When the 500 I had sent out came back, the battery was drained and needed to be charged. So I'm thinking yours may be the same way. Plug in the AC adapter and give it a charge. While it's plugged into the AC adapter, you should be able to boot it up and read away.

Scott_T · 12-21-2009, 09:42 PM

Yup, prob needs a recharge. The update causes it to run down faster too for some reason I hope they fix.

ritoroy · 12-21-2009, 10:10 PM

You guys are the best-- charging the unit with the power cable fixed the problem! I was under the impression that this firmware upgrade finally allowed a power depleted PRS500 to be charged using the USB cable (much like the other Sony Reader family members), but I suppose I was misinformed. In any case, thank you so much for the prompt responses!

12-21-2009, 09:11 PM	#1
ritoroy Enthusiast Posts: 26 Karma: 25654 Join Date: Jul 2009 Device: Sony Reader	Upgraded PRS500 Stuck on Boot Screen I received my PRS500 by UPS today, exactly a week after sending it in. As others have observed, everything was packed very well. Unfortunately, upon powering on the unit, it has been stuck on the "Starting up ..." screen for the last several hours. Trying to toggle the power switch and pressing the reset button on the rear has had no effect. I have sent an email to Sony Repair and am awaiting their reply, but in the meanwhile I was wondering if anybody else has had a similar experience after the upgrade and how it was resolved.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Opus cannot boot, stuck on boot screen	baloma	Bookeen	35	11-13-2010 05:20 AM
Why is the un-upgraded PRS500 no longer supported in Calibre 0.7?	megacoupe	Calibre	10	08-30-2010 12:09 AM
Universal Flasher for upgraded PRS500	jimmyzou	Sony Reader	5	07-22-2010 01:47 PM
Customizing boot-up screen?	Jellby	Gen3 Developer's Corner	5	03-16-2010 11:46 AM
Is there a way to change iliad boot screen	punk	iRex	2	05-30-2008 12:49 PM

12-21-2009, 09:42 PM	#3
Scott_T Groupie Posts: 154 Karma: 876 Join Date: Dec 2009 Device: Kindle 3 wifi, Sony PRS-300, Sony PRS-500, Reb1100(dead)	Yup, prob needs a recharge. The update causes it to run down faster too for some reason I hope they fix.

12-21-2009, 10:10 PM	#4
ritoroy Enthusiast Posts: 26 Karma: 25654 Join Date: Jul 2009 Device: Sony Reader	You guys are the best-- charging the unit with the power cable fixed the problem! I was under the impression that this firmware upgrade finally allowed a power depleted PRS500 to be charged using the USB cable (much like the other Sony Reader family members), but I suppose I was misinformed. In any case, thank you so much for the prompt responses!

Advert