09-15-2024, 09:54 PM | #1 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
Boox Note 3 bricked
My Boox Note 3 bricked. Please check the vedio below
https://drive.google.com/file/d/1oKl...ew?usp=sharing only fastboot mode I can enter. Any suggesion for me to fix this issue? |
09-17-2024, 12:12 AM | #2 |
Onyx-maniac
Posts: 3,155
Karma: 12537601
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
You can always fix a Poke3 from software problems.
The worst case is if you lose some calibration data, MACs or serial number if you haven't backed up. With EDL and the Firehose you can make a full, raw backup that will return your specific device exactly to a certain time point. You can also use EDL to get to recovery and from there do a "factory reset". I'm not sure how you use your device, but I've got nothing "precious" on mine. From a fresh device it would take under 30 minutes to make it like before. Your video is not public. |
Advert | |
|
09-17-2024, 10:33 AM | #3 | |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
Quote:
Thank you for your reply! It has given me some hope. Could you please suggest any instructions or guides on how to proceed with the steps (such as using EDL mode and the Firehose tool)? Also, I have now made the video public, so you should be able to view it. Thanks again for your help! |
|
09-18-2024, 01:06 AM | #4 |
Onyx-maniac
Posts: 3,155
Karma: 12537601
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
That's the boot animation.
It runs when the Android subsystem is mostly running but it hasn't started looking for a launcher application yet. If you had previously enabled ADB you should be able to connect and ask it what it thinks it's doing. But I guess that you haven't? With ADB you could just: Code:
adb reboot recovery Code:
adb reboot edl EDL test cables should work on most recent Onyx. |
09-18-2024, 02:57 AM | #5 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
|
Advert | |
|
09-18-2024, 03:58 AM | #6 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
Is this edl mode?[/QUOTE]
|
09-18-2024, 04:58 AM | #7 |
Onyx-maniac
Posts: 3,155
Karma: 12537601
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
|
09-18-2024, 10:17 AM | #8 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
|
09-18-2024, 11:24 AM | #9 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
I use edl/l command. Get the result below.
C:\Temp>edl /l Found EDL 9008, handshaking... version 2.1 HWID: 000cc0e100000000, JTAG: 000cc0e1, OEM: 0000, Model: 0000 Hash: 7be49b72f9e43372-23ccb84d6eccca4e-61ce16e3602ac200-8cb18b75babe6d09 (x3) |
09-18-2024, 04:02 PM | #10 | |
Onyx-maniac
Posts: 3,155
Karma: 12537601
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
Quote:
You can rename it poke3.bin as it's shorter and more succinct. You may need to start a fresh EDL session as it's easily confused. Code:
C:\>edl /lpoke3.bin C:\>edl /g I get confused. Didn't somebody post after you? Did it disappear? |
|
09-18-2024, 05:43 PM | #11 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
I find the loader by hash code and ...
C:\Temp>edl /labc.bin Found EDL 9008, handshaking... nope, resetting... version 2.1 HWID: 000cc0e100000000, JTAG: 000cc0e1, OEM: 0000, Model: 0000 Hash: 7be49b72f9e43372-23ccb84d6eccca4e-61ce16e3602ac200-8cb18b75babe6d09 (x3) Sending abc.bin 100% ok, starting... ok, waiting for Firehose... ok C:\Temp>edl /g Found EDL 9008, configuring... nope, configuring... ok Requesting info on LUN 0... <log value="ERROR: Failed to open the SDCC Device slot 0 partition 0"/> <log value="ERROR: Failed to open the device 1 slot 0 partition 0"/> <log value="ERROR: Failed to get device info slot:0artition:0"/> <log value="ERROR 14: Line 1270: HANDLE_STORAGE_INFO_FAILURE"/> Nope is this correct? |
09-18-2024, 06:32 PM | #12 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
The result.
C:\Temp>edl /labc.bin Found EDL 9008, handshaking... nope, resetting... version 2.1 HWID: 000cc0e100000000, JTAG: 000cc0e1, OEM: 0000, Model: 0000 Hash: 7be49b72f9e43372-23ccb84d6eccca4e-61ce16e3602ac200-8cb18b75babe6d09 (x3) Sending abc.bin 100% ok, starting... ok, waiting for Firehose... ok C:\Temp>edl /g Found EDL 9008, configuring... nope, configuring... ok Requesting info on LUN 0... <log value="ERROR: Failed to open the SDCC Device slot 0 partition 0"/> <log value="ERROR: Failed to open the device 1 slot 0 partition 0"/> <log value="ERROR: Failed to get device info slot:0artition:0"/> <log value="ERROR 14: Line 1270: HANDLE_STORAGE_INFO_FAILURE"/> Nope |
09-18-2024, 10:29 PM | #13 |
Onyx-maniac
Posts: 3,155
Karma: 12537601
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
Sorry, you're UFS.
Code:
C:\>edl /lpoke3.bin C:\>edl /u /g |
09-19-2024, 06:31 PM | #14 |
Enthusiast
Posts: 41
Karma: 10
Join Date: Sep 2024
Device: Boox Note 3
|
I found another thread (EDL on a Boox Note3) mation
sdm660/3006000000010000_7e425bcb25364725_fhprg_peek.bin worked on Note3 but in my machine got the error below C:\Temp>edl /l Found EDL 9008, handshaking... version 2.1 HWID: 000cc0e100000000, JTAG: 000cc0e1, OEM: 0000, Model: 0000 Hash: 7be49b72f9e43372-23ccb84d6eccca4e-61ce16e3602ac200-8cb18b75babe6d09 (x3) C:\Temp>edl /lbkerler\qualcomm\factory\sdm660\3006000000010000_ 7e425bcb25364725_fhprg_peek.bin Found EDL 9008, handshaking... nope, resetting... version 2.1 HWID: 000cc0e100000000, JTAG: 000cc0e1, OEM: 0000, Model: 0000 Hash: 7be49b72f9e43372-23ccb84d6eccca4e-61ce16e3602ac200-8cb18b75babe6d09 (x3) Sending 3006000000010000_7e425bcb25364725_fhprg_peek.bin 100% ok, starting... ok, waiting for Firehose... no response, poking... Could not write device I can load other .bin such as bkerler\qualcomm\factory\sdm636\000cc0e100000000_7 be49b72f9e43372_fhprg_bqx2_peek.bin What's the problem? another I don't know why my post always dispear after reply |
09-19-2024, 09:15 PM | #15 |
Onyx-maniac
Posts: 3,155
Karma: 12537601
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
For most devices you have to pay attention to the PK hash and it must match.
That's because it's the security mechanism for Secure Boot. But if you don't have Secure Boot enabled the universe of loaders to check is much larger. A single loader can support multiple different processors. In the final analysis the loader you need is the one that works. The loader you mentioned in #12 seemed to work fine, but you need that /u flag. Why are you talking about a different loader in #14? |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Possible to recover a bricked Boox Note Plus? | noteplususer | Onyx Boox | 3 | 04-19-2022 03:57 PM |
Bricked Boox Note 5 | xenoscr | Onyx Boox | 1 | 02-05-2022 03:04 PM |
Clarify tech specs: Screen on Onyx Boox Note Pro vs Onyx Boox Note 3. | Sm0och | Onyx Boox | 12 | 08-10-2021 04:14 PM |
Boox Note and Boox Note pro: unreliable screen! | tokapi | Onyx Boox | 10 | 06-14-2020 07:20 PM |
Boox Note Bricked? | jdog609 | Onyx Boox | 11 | 08-08-2018 10:16 AM |