OpticBook 3600 Book Scanner Review - Part I

Bob Russell · 02-08-2007, 12:39 AM

Over the past few months, I have been the user of a Plustek OpticBook 3600 loaner device for review purposes. The kind folks at Plustek allowed me to use the scanner for a longer period of time so I could get a good feel for what it's really like, instead of just a first impression, and now I am passing that benefit on to each of you.

So why would anyone be interested in a book scanner anyway? The obvious reason is to convert paper books that you would like to store and/or read in electronic form. While there are limits due to copyright law, it is amazing how many books and materials are worthy of conversion that are either personally owned, or in the public domain. And a surprising side benefit of having a scanner around is that it is also very useful for general document scanning. It can be convenient for creating an electronic version of paper documents for record keeping or archiving. Common targets include photo scans, receipts, handwritten notes and many more of the multitude of paper documents that surround us. And it is obviously also capable of being used to make paper copies in conjunction with your computer's printer.

We will focus on the real life experience when using this product right out of the box, as opposed to a sterile analysis of the specifications. I'll leave it to our readers to do any dissection of the specs. Instead, for this review you'll see what it actually takes to set it up, and what it's like to scan a book with it. That sort of hands on information that much harder to come by, and is probably non-existent on the web for this scanner until today. I should also indicate that I am approaching this as a scanning novice. I do not currently own a scanner, and while I have scanned paper documents at times in the past, scanning a book was an entirely new experience for me. Most potential buyers who are considering such a purchase will probably find themselves in a similar circumstance.

But before we move on, we will satisfy the primal thirst for specs, with this fairly comprehensive list:
* USB 2.0
* Color CCD image sensor
* Hardware Resolution = 1200 dpi
* Interpolated Resolution = 24000 dpi
* Scanning Modes
- Color: 48-bit input, 24/48-bit output
- Grayscale: 16-bit input, 8/16-bit output
- B/W: 1-bit
* Max. Flatbed Scanning area
- 216 x 297 mm (8.5" x 11.69", A4/ Letter Size)
* Hardware Action Buttons
* Net Weight Approx. 3900g / 8.5 lbs (scanner only)
* Dimensions(D x W x H) = 453 x 285 x 105 mm (18 x 11 x 4 inches)
* Scan Mode is Single Pass
* Lamp is Cold Cathode
* Power Consumption: 18W (operation), 4.3W (idle)
* Cable Length: 150 cm (59.06")
* System Requirements:
- IBM Compatible PC, with Pentium II or faster CPU
- CD-ROM Driver
- One available USB Port
- 128 MB RAM (256MB recommended)
- 500 MB free HDD space
- High Color graphic card (VGA or higher)
- Microsoft Windows XP, 2000

The OpticBook 3600 is one of a handful of scanners that stands out in the marketplace for fast and simple book scanning at a reasonable price (e.g. currently $299.99 at TigerDirect which is one of many retailers listed on the Plustek web site.) This product's "claim to fame" is the ability to scan all the way to the edge of the scanning area, which allows you to easily scan a flat book page without pressing the spine down hard onto the glass as with a typical flatbed scanner. It is described in the product description as "Plustek's patent pending SEE™ (Shadow Elimination Element) Technology includes a specially designed edge and lamp. This revolutionary technology allows half of the book to lay completely flat on the glass with the binding against the corner edge."

One big advantage of edge scanning is that older books can be scanned without damaging the book in the process. This is something that I tested for myself with an old book that is already falling apart, and I would not have been able to safely scan it with a standard flatbed scanner. A much more expensive overhead scanning setup would have been required. You can see how a book can be scanned using this edge scan technology

in contrast to pushing the book down to get a decent scan near the spine.

I should also warn you that we will be taking this review step by step in detail. So for those of you that are looking for the summary results, feel free to scan the screenshots and wait for the a later installment of the review with the summary conclusion. But if you want to see more detail, you can get a feel for the full experience by following along with the journey as I unpack, setup and use the scanner to scan books.

Arrival

As you might expect, I was quite eager to get my hands on the scanner. And most of all, I wanted to get a feel for whether book scanning was even practical with a relatively inexpensive device. We'll consider that in time, but first the impressions when it first arrived.

The box is quite nice, and was smaller than I expected. I was encouraged even before opening it up, but when I unpacked the unit, it was a pleasing size and style which could reasonably be placed on a table or desk without looking too bulky. But if you have a small desk, you will want to consider putting it on another surface like a half-size file cabinet. The scanner has a solid look to it, but has the typical light plastic feel when handled. It seems sturdy enough, so in general appearance, I'd give it a B+. It appears plenty good for most situations.

When you place the unit on a flat surface, the first thing you notice is that it doesn't sit flat because of the locking mechanism on the bottom, which is convenient because in that location you are not likely to miss it. The lock is used during shipping to make sure that fragile parts don't swing around dangerously while it is being handled. So before you connect it and turn it on, you should unlock it. The instructions are a little confusing at first, but basically you want to release the lock in such a way as to let it operate when at rest, but still automatically lock if the unit is lifted up from the table or desk. Alternately, you can either put the lock in a fixed position so that it is always either unlocked or always locked, e.g. for use on a very rough surface or for transport.

Box Contents

Included in the box was the scanner, a USB cable, an AC adapter, and two CD-ROMs with setup and applications. Also included is a folded up poster sized set of instructions in about 5 languages. It doesn't take a lot of information to get going.

CD #1 has:
* Plustek Scanning Software (Driver, OpticTWAIN, Action Express, Book Pilot)
* Ulead Photo Explorer 8.0 SE Basic
* Abbyy FineReader 5.0 Sprint OCR
* NewSoft Presto PageManager 6.0
* Something writtin in Japanese or Chinese that I couldn't read
* Adobe Reader
* Electronic User's Guide

CD2 has:
* Ulead PhotoImpact XL SE

I was relieved to find that there were no fancy attachments to learn how to use. I figure the main effort for setup (once you figured out how the lock works) is simply installing the software. The hardware is just a matter of plugging in the cable and adapter. The instructions seem to indicate that you can use a USB hub that is plugged into the computer, but my available port closest to the scanner was directly into the computer, so that’s what I used. I also used my own cable because the supplied cable was pretty short.

Software Installation

With XP, you turn on the scanner (which launches the New Hardware Wizard) and then put the first CD in the computer. The power switch is a rocker switch on the right hand side near the bottom and towards the back. The Wizard popped up as expected, and I chose “Install the Software Automatically” as per the XP instructions. Well, actually I had to respond “No, not this time” to the prompt about using Windows Update to search for software.

I was a little concerned when a “Found no scanner” dialog box came up, but it disappeared a bit later all on its own. The computer also froze temporarily, causing me a little concern, but that also passed quickly. The new hardware wizard reported that it finished installing the software for OpticBook 3600, so I was happy. I hit “Finish” on that wizard and felt like I had accomplished something. So far so good.

Installation continues with the other software. The main screen for that installation was already conveniently waiting for me to proceed. The instruction sheet said to follow my nose (my paraphrase) until done and then reset. So I did, and here's how it went...

First I clicked “Install the Software”.

Personally, I hate all the excess software that comes with cameras or scanners or other gadgets, and it’s not always even clear which are trial versions. So I decided to go with a custom install, figuring that I could add more applications later if I missed one.

Turns out that all four programs is not unreasonable, so I probably would have saved myself some trouble if I had just done a typical install instead of doing a non-complete install. The programs to choose from were described by PlusTek as follows:

Ulead Photo Explorer -- Useful Image management software to quickly browse, organize, or enhance images. Create slideshows to share on CD, publish to the web, or a VCD. (I don’t think I need this for simple book scanning and OCR, so it will get skipped.)

Abbyy FineReader -- High Accuracy OCR software featuring 14 language user interface and 176 language recognition. (This is what does the OCR, so I want this for sure.)

NewSoft Presto PageManager -- Powerful document management software for OCR, PDF creation, or format conversion to Microsoft Word or Excel. (Looks like I’ll need this, so it’s in.)

Ulead PhotoImpact -- Powerful image editing software featuring extensive editing tools for working with digital photos, creative graphic e-design, and easy web page creation. (Maybe interesting, but doesn’t look like I need it now, so it's out.)

When I got to Abbyy FineReader, of course I chose English only because I only plan to scan English books.

Abbyy FineReader installation also came up with this next screen that I wanted no part of, so I changed the default to a “No”. It might be something I want, but I’m pretty gunshy about blanket permissions for stuff like that, so I’ll just have to miss out on the fun.

PageManager was installed next. No surprises.

So the whole install process can be done for a novice in about a half hour. That includes all the wasted time figuring out what to do and reading the instruction steps to make sure you aren’t messing anything up.

All in all, I’d say it couldn’t be simpler, and it gives me a lot of confidence going forward. But the real challenge comes later - how hard is it to scan and OCR, and does it even work? Now to the fun part!

Scanning My First Book!

For my first attempt at scanning a book, I tried Orbitsville, by Bob Shaw. Actually, I specifically bought the used book for this purpose as it seems to be out of print and it’s a book that I wouldn’t mind reading anyway. In addition, it’s a relatively ordinary oversized paperbook with not too many pages (187 in my edition). Back to the instruction sheet, this time on the reverse side.

Step #1 of scanning a book is preparation: Put the book on the glass, click on the Book function button on the scanner (to choose Book mode rather than Paper mode), and click on the Book Pilot button on the scanner to launch the Book Pilot software window. Making a guess at how the pages would be oriented even and odd, I set the cover down as if I would be scanning an odd page in the book with the binding on the edge. A nice touch is that the image is previewed automatically. Oddly enough, when the Book Pilot window opened up, it told me to wait for the scanner to warm up. I'm guessing that has something to do with the lamp, but I'm not sure.

After the progress bar finished, indicating that the scanner was warmed up, I saw the preview window.

Step 2 is to select the settings. (You don’t actually start scanning until step 3.) First off, I selected a new project.

After creating the project file, you then adjust the scan frame. I.e drag the dotted line to cover the actual size of the book.

I’m a little confused about black and white versus grey scale versus color because I don’t want color except for the cover. So I’ll rule out color for now. I don’t want grey scale either (less resolution), so I want to go with black and white, but the preview looks horrible. Remembering a comment from MoonRaker, I decided to go with greyscale after all.

Here’s what black and white preview would have looked like:

There are also some advanced settings available (strangely enough you click on the button that looks like a big folder to get to the advanced settings). It did look like I could improve on the image. But not knowing what I’m doing yet, I left it at the default grey scale settings.

There is a setting for page rotation, and I chose 180 degree rotation for every even page, figuring that the odd pages would be just like the cover, since I had the binding near the edge.

Last setting before I go to scanning is the destination folder for the scanned images. I created a subfolder from where the project file was stored.

Very oddly, there is no instruction on what image format to use. I left the default BMP thinking that it might be the default for a reason other than due to an alphabetic sort of file types. Also, I thought I remembered it being lossless, whereas JPEG degrades more after being edited. TIF seemed the most logical choice, however, and Moonraker had also mentioned TIF, so I figured I might be sorry about BMP. But that’s probably what a typical new user would have chosen, so I went with BMP.

I wasn’t sure how the file name prefixes would be used by programs down the line, but a note in the instructions suggested that you use a combination of folder, file format and file name prefix. They gave a reason that I couldn’t understand, but I followed obediently and chose “Images_BMP_Orbitsville_” for the image name prefix. It turned out to be a good choice.

So here’s my settings before I selected “Next…”

Now that I've got the settings I click on "Next". Oops! That doesn’t seem to be what I should have done! Next is meant to be clicked when you finish scanning, in order to do some batch work with the images. Here's what I got by mistake.

So I’ll click on “Back” and hope it behaves well. Yep, back to the previous screen as desired. Unfortunately, now I need to wait a few seconds for the scanner to warm up again.

To be continued in Part II...

Unfortunately, due to the lateness of the hour and the maximum size limit for posts, we will have to end Part I for now. When I have opportunity, I will continue with Part II and a description of the actual scanning process, as well as turning the scanned images into an e-book. If you are interested in book scanning, you won't want to miss it!

Please pardon any spelling or grammatical errors because my focus is getting this information out, not worrying about spelling. While I may go back and proofread this post in the days to come, for now you get it in its raw form. But if you are curious like me about book scanning, and want to get a feel for what it's like to use the OpticBook scanner to scan a book, this information will be both unique and invaluable, and well worth the wait!

Disclaimer: Depending on your books, your location and your circumstances, local law may or may not allow you to "format shift" your books to electronic format. Each individual is responsible for ensuring that use of a book scanner falls within legal constraints, and I am no legal expert. But most emphatically, we vehemently discourage any form of e-book piracy. Such activities only slow the adoption of commercial e-books and feed the ongoing propaganda machine that implies piracy is the primary justification for invasive DRM technologies. This review is not intended in any way to provide a discussion of copyright law, but the topic should be mentioned, and so now it has been.

Liviu_5 · 02-08-2007, 10:51 AM

For output format I use either jpg or tif, and I found out that it looks better than bmp and easier to manipulate if you do not want to ocr but build yourself a picture book which can be read by anything that reads embedded pictures (Fbreader, Ebk1150...)

For ocr'ing text grayscale does not work well for me, b&w is crisper and ocr's well. For covers or stuff with pictures like documents, diplomas... grayscale is indeed better. Since I have a b&w laser printer only, color is not that useful for me (though sometimes it enhances some documents, but scanning in color is very slow).

Studio717 · 02-08-2007, 02:43 PM

Very nice review. My biggest complaint is that it's Win only. This would be totally sweet on the Mac, especially with DevonThink Pro Office integration. Unlikely, I know, but I can dream.

I've had my 3600 for quite a few months and do like it. One reason I have a Mac Mini on order is that I got tired of hauling out my old Dell laptop just to use this scanner. I tend not to use the OCR (I use Acrobat's instead), but agree with Liviu_5 on using .tif (not .jpg so much for text).

The only thing I've found annoying is that I sometimes get the page rotation thing going wrong. Operator error, I'm sure, but sometimes it works just like I think it's supposed to and other times the opposite. Occasionally, I'll fiddle with it until it's right, but most times I just quickly fix it in Acrobat.

Moonraker · 02-08-2007, 03:23 PM

Thanks for an excellent review.

Can't wait for Part 2.

valkyriesound · 02-09-2007, 09:21 AM

Very cool... I like all the detail...

I'd like to know how long it really takes to scan a page.... including the preview time and scan time. Do you have to preview each page or can you set the book in the same place and have it just go straight to a scan?

Also... can you try a comic and tell use if you notice anything amiss?

Thanks!

nekokami · 02-09-2007, 09:41 AM

Very cool! If only there were an inexpensive way to have it turn the pages as well....

Bob Russell · 02-09-2007, 10:01 AM

Quote:

Originally Posted by valkyriesound

Very cool... I like all the detail...

I'd like to know how long it really takes to scan a page.... including the preview time and scan time. Do you have to preview each page or can you set the book in the same place and have it just go straight to a scan?

Also... can you try a comic and tell use if you notice anything amiss?

Thanks!

The preview is optional and only really gets used when setting up the page size and scan parameters. Once you set it, there's no more need to preview.

One advantage of doing scanning one page at a time with the book hanging over the edge is that you naturally put the book in the same place each time. It almost "has to be" in the same place. (As opposed to a two-page scan on a flatbed, which I assume works more like a copier, and requires you to pay a bit more attention to where the book lays if you want it to be consistent.)

I don't have any comics to try, but I think this would be a great scanner for comic books or manga. Assuming there is still just a little bit of margin near the binding in a comic book or manga, I think this device would be great. From the scans I've seen, I am confident the content would look good. If you want to OCR the comics, though, that would be a different matter and might not work very well.

Studio717 · 02-09-2007, 02:38 PM

I know Bob's in-depth Part 2 will cover all this is detail, but I'd like to add that one great feature for "speed scanning" is that the 3600 has buttons on the scanner to initiate the scan, a separate one for each of the three scanning modes, B&W, Grayscale, and Color. Once set up*, you can just place the book and press the appropriate button on the scanner. You don't have to reach and click in the software. That really speeds things up.

(*By set up, I mean what Bob talked about in his response above - have the page size adjusted, mode, folder, file prefix, etc., all set up for a particular book, including that pesky (at least to me) page rotate feature (which is quite handy).)

Bob, I'm really looking forward to next installment. If you can figure out what criteria it uses to calculate 'odd' and 'even' on the page rotate feature, I'll be eternally grateful! (It probably doesn't help that I forget to set it until after I've started scanning.

)

Bob Russell · 02-09-2007, 03:30 PM

Thanks for mentioning the buttons, Studio717, because I really might not really say anything about them. I guess I basically ignored them because they weren't of interest to me.

As far as the page rotate, I think it's not complicated. (Well, me trying to explain it here in words might sound complicated, but the idea is simple.) Here's the working assumption that I've made, and it's been useful for me so far:

When you first start scanning, you are scanning page 1 no matter how the book is aligned or what you are scanning. So the sequence as far as OpticBook is concerned is always ODD, EVEN, ODD, etc

Suppose you know the next scan is going to come out upside down (for example, if you "fool" the scanner by scanning two odd pages in a row, or two even pages in a row, or if you are rescanning the same page for a second time in a row). Then you just change the setting to the opposite value. In other words, if it is rotating odd pages, then set it to rotate even pages. And if it is currently rotating even pages, set it to rotate odd pages. That will get it back on track.

If you approach it that way, I think you'll find it's less confusing, and you really don't have to know anything about how it calculates things internally. Just remember that OpticBook doesn't know which way you are laying the book down, so you can't determine much by whether the "real" page being scanned is an even or odd number in the book.

One more note... if I remember correctly (maybe someone can help me out on this), the preview doesn't show the rotation (does it?). If that's true, then if you get lost, you can't really tell ahead of time whether that next scan will be upside down or not, without some mental gymnastics. In that case, I simply scan it and look to see what happens. If it's upside down, delete the scan and rescan it. It will be right side up next time, and then you can proceed. No change of settings is necessary.

Wizard-mag · 02-11-2007, 01:48 PM

Thanks for the review. I am eager to read the second part.

Quote:

Originally Posted by Bob Russell

So why would anyone be interested in a book scanner anyway? The obvious reason is to convert paper books that you would like to store and/or read in electronic form. While there are limits due to copyright law, it is amazing how many books and materials are worthy of conversion that are either personally owned, or in the public domain. And a surprising side benefit of having a scanner around is that it is also very useful for general document scanning. It can be convenient for creating an electronic version of paper documents for record keeping or archiving. Common targets include photo scans, receipts, handwritten notes and many more of the multitude of paper documents that surround us. And it is obviously also capable of being used to make paper copies in conjunction with your computer's printer.

Only to note - if you would like to get an electronic version of a document and you do not have a scanner, a good sollution is to use your digital camera.

It looks ugly at first, but it is not as bad as it looks. If you take it with the largest focal length you can have (maximum zoom), you end up with a rather good result with most of today's cameras - even the simple point-n-shoots.

We have only Minolta Dimage X50, which is an ultra-compact, and I have been using it to archive various important documents in electronic version until now and I am quite satisfied.

Of course, at least for now, there can't be any talk of OCR, but in the years to come - who knows.

Bob Russell · 02-11-2007, 02:07 PM

Great observation Wizard-mag. I think overhead mounts for digital cameras is the way we will all be scanning books in the future. But it may be some time until that method can compete with OpticBook for the general book scanning user. I'd love to see some products appearing that are simply an overhead mount for good standard compact digital cams (like the Canon SD600 that I just got for $200). People are already buying them and the overhead mount can't be too expensive. Make it a bundle with overhead mount and OCR/Scanning software and it might be a very nice way to scan books... if there's no hidden "gotchas" to that approach.

Thanks also to everyone for the interest in Part 2. It is coming, but please be patient as my schedule is a little crazy right now! I look forward to getting it ready.

nekokami · 02-11-2007, 03:41 PM

Quote:

Originally Posted by Bob Russell

I'd love to see some products appearing that are simply an overhead mount for good standard compact digital cams (like the Canon SD600 that I just got for $200). People are already buying them and the overhead mount can't be too expensive. Make it a bundle with overhead mount and OCR/Scanning software and it might be a very nice way to scan books... if there's no hidden "gotchas" to that approach.

Then you just need one of these and you're all set!

RWood · 02-11-2007, 04:11 PM

Well, the Book Time 5000 is slower than the Sony Reader at flipping pages....

Maybe we should take up a collection for Bob to buy a comic to test for Part 3 of the review.

nekokami · 02-11-2007, 05:40 PM

My point about the Book Time was just that you could set it up with the camera and go do something else while the pages are photographed and OCR'd. (Assuming it doesn't jam up.) I have an awful lot going on right now and I'm not sure I'd be able to squeeze in scanning my books a page at a time. Yet I'd *really* like to get my whole library digitized. Before I :shudder: move again....

sea2stars · 02-12-2007, 02:56 AM

*grin* Nekokami, here you go!

How to Make a Full Auto Book Scanner

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpticBook 3600 scanner & Windows 7	Atys	Workshop	3	08-17-2009 07:22 PM
OpticBook 3600 and Kindle DX	Gideon	Amazon Kindle	25	08-07-2009 06:12 PM
Book friendly and Linux compatible scanner(as OpticBook) ?	timofonic	Workshop	6	07-16-2009 02:19 AM
Question about Opticbook 3600	301verbs	Workshop	4	06-15-2009 09:08 PM
OpticBook 3600 for $229.99 at TigerDirect	Bob Russell	Deals and Resources (No Self-Promotion or Affiliate Links)	16	10-21-2008 03:43 PM

02-08-2007, 12:39 AM	#1
Bob Russell Recovering Gadget Addict Posts: 5,381 Karma: 676161 Join Date: May 2004 Location: Pittsburgh, PA Device: iPad	OpticBook 3600 Book Scanner Review - Part I Over the past few months, I have been the user of a Plustek OpticBook 3600 loaner device for review purposes. The kind folks at Plustek allowed me to use the scanner for a longer period of time so I could get a good feel for what it's really like, instead of just a first impression, and now I am passing that benefit on to each of you. So why would anyone be interested in a book scanner anyway? The obvious reason is to convert paper books that you would like to store and/or read in electronic form. While there are limits due to copyright law, it is amazing how many books and materials are worthy of conversion that are either personally owned, or in the public domain. And a surprising side benefit of having a scanner around is that it is also very useful for general document scanning. It can be convenient for creating an electronic version of paper documents for record keeping or archiving. Common targets include photo scans, receipts, handwritten notes and many more of the multitude of paper documents that surround us. And it is obviously also capable of being used to make paper copies in conjunction with your computer's printer. We will focus on the real life experience when using this product right out of the box, as opposed to a sterile analysis of the specifications. I'll leave it to our readers to do any dissection of the specs. Instead, for this review you'll see what it actually takes to set it up, and what it's like to scan a book with it. That sort of hands on information that much harder to come by, and is probably non-existent on the web for this scanner until today. I should also indicate that I am approaching this as a scanning novice. I do not currently own a scanner, and while I have scanned paper documents at times in the past, scanning a book was an entirely new experience for me. Most potential buyers who are considering such a purchase will probably find themselves in a similar circumstance. But before we move on, we will satisfy the primal thirst for specs, with this fairly comprehensive list: * USB 2.0 * Color CCD image sensor * Hardware Resolution = 1200 dpi * Interpolated Resolution = 24000 dpi * Scanning Modes - Color: 48-bit input, 24/48-bit output - Grayscale: 16-bit input, 8/16-bit output - B/W: 1-bit * Max. Flatbed Scanning area - 216 x 297 mm (8.5" x 11.69", A4/ Letter Size) * Hardware Action Buttons * Net Weight Approx. 3900g / 8.5 lbs (scanner only) * Dimensions(D x W x H) = 453 x 285 x 105 mm (18 x 11 x 4 inches) * Scan Mode is Single Pass * Lamp is Cold Cathode * Power Consumption: 18W (operation), 4.3W (idle) * Cable Length: 150 cm (59.06") * System Requirements: - IBM Compatible PC, with Pentium II or faster CPU - CD-ROM Driver - One available USB Port - 128 MB RAM (256MB recommended) - 500 MB free HDD space - High Color graphic card (VGA or higher) - Microsoft Windows XP, 2000 The OpticBook 3600 is one of a handful of scanners that stands out in the marketplace for fast and simple book scanning at a reasonable price (e.g. currently $299.99 at TigerDirect which is one of many retailers listed on the Plustek web site.) This product's "claim to fame" is the ability to scan all the way to the edge of the scanning area, which allows you to easily scan a flat book page without pressing the spine down hard onto the glass as with a typical flatbed scanner. It is described in the product description as "Plustek's patent pending SEE™ (Shadow Elimination Element) Technology includes a specially designed edge and lamp. This revolutionary technology allows half of the book to lay completely flat on the glass with the binding against the corner edge." One big advantage of edge scanning is that older books can be scanned without damaging the book in the process. This is something that I tested for myself with an old book that is already falling apart, and I would not have been able to safely scan it with a standard flatbed scanner. A much more expensive overhead scanning setup would have been required. You can see how a book can be scanned using this edge scan technology in contrast to pushing the book down to get a decent scan near the spine. I should also warn you that we will be taking this review step by step in detail. So for those of you that are looking for the summary results, feel free to scan the screenshots and wait for the a later installment of the review with the summary conclusion. But if you want to see more detail, you can get a feel for the full experience by following along with the journey as I unpack, setup and use the scanner to scan books. Arrival As you might expect, I was quite eager to get my hands on the scanner. And most of all, I wanted to get a feel for whether book scanning was even practical with a relatively inexpensive device. We'll consider that in time, but first the impressions when it first arrived. The box is quite nice, and was smaller than I expected. I was encouraged even before opening it up, but when I unpacked the unit, it was a pleasing size and style which could reasonably be placed on a table or desk without looking too bulky. But if you have a small desk, you will want to consider putting it on another surface like a half-size file cabinet. The scanner has a solid look to it, but has the typical light plastic feel when handled. It seems sturdy enough, so in general appearance, I'd give it a B+. It appears plenty good for most situations. When you place the unit on a flat surface, the first thing you notice is that it doesn't sit flat because of the locking mechanism on the bottom, which is convenient because in that location you are not likely to miss it. The lock is used during shipping to make sure that fragile parts don't swing around dangerously while it is being handled. So before you connect it and turn it on, you should unlock it. The instructions are a little confusing at first, but basically you want to release the lock in such a way as to let it operate when at rest, but still automatically lock if the unit is lifted up from the table or desk. Alternately, you can either put the lock in a fixed position so that it is always either unlocked or always locked, e.g. for use on a very rough surface or for transport. Box Contents Included in the box was the scanner, a USB cable, an AC adapter, and two CD-ROMs with setup and applications. Also included is a folded up poster sized set of instructions in about 5 languages. It doesn't take a lot of information to get going. CD #1 has: * Plustek Scanning Software (Driver, OpticTWAIN, Action Express, Book Pilot) * Ulead Photo Explorer 8.0 SE Basic * Abbyy FineReader 5.0 Sprint OCR * NewSoft Presto PageManager 6.0 * Something writtin in Japanese or Chinese that I couldn't read * Adobe Reader * Electronic User's Guide CD2 has: * Ulead PhotoImpact XL SE I was relieved to find that there were no fancy attachments to learn how to use. I figure the main effort for setup (once you figured out how the lock works) is simply installing the software. The hardware is just a matter of plugging in the cable and adapter. The instructions seem to indicate that you can use a USB hub that is plugged into the computer, but my available port closest to the scanner was directly into the computer, so that’s what I used. I also used my own cable because the supplied cable was pretty short. Software Installation With XP, you turn on the scanner (which launches the New Hardware Wizard) and then put the first CD in the computer. The power switch is a rocker switch on the right hand side near the bottom and towards the back. The Wizard popped up as expected, and I chose “Install the Software Automatically” as per the XP instructions. Well, actually I had to respond “No, not this time” to the prompt about using Windows Update to search for software. I was a little concerned when a “Found no scanner” dialog box came up, but it disappeared a bit later all on its own. The computer also froze temporarily, causing me a little concern, but that also passed quickly. The new hardware wizard reported that it finished installing the software for OpticBook 3600, so I was happy. I hit “Finish” on that wizard and felt like I had accomplished something. So far so good. Installation continues with the other software. The main screen for that installation was already conveniently waiting for me to proceed. The instruction sheet said to follow my nose (my paraphrase) until done and then reset. So I did, and here's how it went... First I clicked “Install the Software”. Personally, I hate all the excess software that comes with cameras or scanners or other gadgets, and it’s not always even clear which are trial versions. So I decided to go with a custom install, figuring that I could add more applications later if I missed one. Turns out that all four programs is not unreasonable, so I probably would have saved myself some trouble if I had just done a typical install instead of doing a non-complete install. The programs to choose from were described by PlusTek as follows: Ulead Photo Explorer -- Useful Image management software to quickly browse, organize, or enhance images. Create slideshows to share on CD, publish to the web, or a VCD. (I don’t think I need this for simple book scanning and OCR, so it will get skipped.) Abbyy FineReader -- High Accuracy OCR software featuring 14 language user interface and 176 language recognition. (This is what does the OCR, so I want this for sure.) NewSoft Presto PageManager -- Powerful document management software for OCR, PDF creation, or format conversion to Microsoft Word or Excel. (Looks like I’ll need this, so it’s in.) Ulead PhotoImpact -- Powerful image editing software featuring extensive editing tools for working with digital photos, creative graphic e-design, and easy web page creation. (Maybe interesting, but doesn’t look like I need it now, so it's out.) When I got to Abbyy FineReader, of course I chose English only because I only plan to scan English books. Abbyy FineReader installation also came up with this next screen that I wanted no part of, so I changed the default to a “No”. It might be something I want, but I’m pretty gunshy about blanket permissions for stuff like that, so I’ll just have to miss out on the fun. PageManager was installed next. No surprises. So the whole install process can be done for a novice in about a half hour. That includes all the wasted time figuring out what to do and reading the instruction steps to make sure you aren’t messing anything up. All in all, I’d say it couldn’t be simpler, and it gives me a lot of confidence going forward. But the real challenge comes later - how hard is it to scan and OCR, and does it even work? Now to the fun part! Scanning My First Book! For my first attempt at scanning a book, I tried Orbitsville, by Bob Shaw. Actually, I specifically bought the used book for this purpose as it seems to be out of print and it’s a book that I wouldn’t mind reading anyway. In addition, it’s a relatively ordinary oversized paperbook with not too many pages (187 in my edition). Back to the instruction sheet, this time on the reverse side. Step #1 of scanning a book is preparation: Put the book on the glass, click on the Book function button on the scanner (to choose Book mode rather than Paper mode), and click on the Book Pilot button on the scanner to launch the Book Pilot software window. Making a guess at how the pages would be oriented even and odd, I set the cover down as if I would be scanning an odd page in the book with the binding on the edge. A nice touch is that the image is previewed automatically. Oddly enough, when the Book Pilot window opened up, it told me to wait for the scanner to warm up. I'm guessing that has something to do with the lamp, but I'm not sure. After the progress bar finished, indicating that the scanner was warmed up, I saw the preview window. Step 2 is to select the settings. (You don’t actually start scanning until step 3.) First off, I selected a new project. After creating the project file, you then adjust the scan frame. I.e drag the dotted line to cover the actual size of the book. I’m a little confused about black and white versus grey scale versus color because I don’t want color except for the cover. So I’ll rule out color for now. I don’t want grey scale either (less resolution), so I want to go with black and white, but the preview looks horrible. Remembering a comment from MoonRaker, I decided to go with greyscale after all. Here’s what black and white preview would have looked like: There are also some advanced settings available (strangely enough you click on the button that looks like a big folder to get to the advanced settings). It did look like I could improve on the image. But not knowing what I’m doing yet, I left it at the default grey scale settings. There is a setting for page rotation, and I chose 180 degree rotation for every even page, figuring that the odd pages would be just like the cover, since I had the binding near the edge. Last setting before I go to scanning is the destination folder for the scanned images. I created a subfolder from where the project file was stored. Very oddly, there is no instruction on what image format to use. I left the default BMP thinking that it might be the default for a reason other than due to an alphabetic sort of file types. Also, I thought I remembered it being lossless, whereas JPEG degrades more after being edited. TIF seemed the most logical choice, however, and Moonraker had also mentioned TIF, so I figured I might be sorry about BMP. But that’s probably what a typical new user would have chosen, so I went with BMP. I wasn’t sure how the file name prefixes would be used by programs down the line, but a note in the instructions suggested that you use a combination of folder, file format and file name prefix. They gave a reason that I couldn’t understand, but I followed obediently and chose “Images_BMP_Orbitsville_” for the image name prefix. It turned out to be a good choice. So here’s my settings before I selected “Next…” Now that I've got the settings I click on "Next". Oops! That doesn’t seem to be what I should have done! Next is meant to be clicked when you finish scanning, in order to do some batch work with the images. Here's what I got by mistake. So I’ll click on “Back” and hope it behaves well. Yep, back to the previous screen as desired. Unfortunately, now I need to wait a few seconds for the scanner to warm up again. To be continued in Part II... Unfortunately, due to the lateness of the hour and the maximum size limit for posts, we will have to end Part I for now. When I have opportunity, I will continue with Part II and a description of the actual scanning process, as well as turning the scanned images into an e-book. If you are interested in book scanning, you won't want to miss it! Please pardon any spelling or grammatical errors because my focus is getting this information out, not worrying about spelling. While I may go back and proofread this post in the days to come, for now you get it in its raw form. But if you are curious like me about book scanning, and want to get a feel for what it's like to use the OpticBook scanner to scan a book, this information will be both unique and invaluable, and well worth the wait! Disclaimer: Depending on your books, your location and your circumstances, local law may or may not allow you to "format shift" your books to electronic format. Each individual is responsible for ensuring that use of a book scanner falls within legal constraints, and I am no legal expert. But most emphatically, we vehemently discourage any form of e-book piracy. Such activities only slow the adoption of commercial e-books and feed the ongoing propaganda machine that implies piracy is the primary justification for invasive DRM technologies. This review is not intended in any way to provide a discussion of copyright law, but the topic should be mentioned, and so now it has been.

02-08-2007, 10:51 AM	#2
Liviu_5 Books and more books Posts: 917 Karma: 69499 Join Date: Mar 2006 Location: White Plains, NY, USA Device: Nook Color, Itouch, Nokia770, Sony 650, Sony 700(dead), Ebk(given)	For output format I use either jpg or tif, and I found out that it looks better than bmp and easier to manipulate if you do not want to ocr but build yourself a picture book which can be read by anything that reads embedded pictures (Fbreader, Ebk1150...) For ocr'ing text grayscale does not work well for me, b&w is crisper and ocr's well. For covers or stuff with pictures like documents, diplomas... grayscale is indeed better. Since I have a b&w laser printer only, color is not that useful for me (though sometimes it enhances some documents, but scanning in color is very slow).

02-08-2007, 02:43 PM	#3
Studio717 Addict Posts: 208 Karma: 575 Join Date: Oct 2006 Location: California Device: Various Kindles, iPhone, iPad, Galaxy 10.1	Very nice review. My biggest complaint is that it's Win only. This would be totally sweet on the Mac, especially with DevonThink Pro Office integration. Unlikely, I know, but I can dream. I've had my 3600 for quite a few months and do like it. One reason I have a Mac Mini on order is that I got tired of hauling out my old Dell laptop just to use this scanner. I tend not to use the OCR (I use Acrobat's instead), but agree with Liviu_5 on using .tif (not .jpg so much for text). The only thing I've found annoying is that I sometimes get the page rotation thing going wrong. Operator error, I'm sure, but sometimes it works just like I think it's supposed to and other times the opposite. Occasionally, I'll fiddle with it until it's right, but most times I just quickly fix it in Acrobat.

02-08-2007, 03:23 PM	#4
Moonraker Addict Posts: 314 Karma: 1002965 Join Date: Mar 2006 Location: UK Device: ILiad. Gen 3, PocketBook 360, Kobo Aura HD, Kindle Oasis 2	Thanks for an excellent review. Can't wait for Part 2.

02-09-2007, 09:21 AM	#5
valkyriesound Connoisseur Posts: 61 Karma: 108 Join Date: Oct 2006 Location: LA,CA	Very cool... I like all the detail... I'd like to know how long it really takes to scan a page.... including the preview time and scan time. Do you have to preview each page or can you set the book in the same place and have it just go straight to a scan? Also... can you try a comic and tell use if you notice anything amiss? Thanks!

02-09-2007, 09:41 AM	#6
nekokami fruminous edugeek Posts: 6,745 Karma: 551260 Join Date: Oct 2006 Location: Northeast US Device: iPad, eBw 1150	Very cool! If only there were an inexpensive way to have it turn the pages as well....

02-09-2007, 02:38 PM	#8
Studio717 Addict Posts: 208 Karma: 575 Join Date: Oct 2006 Location: California Device: Various Kindles, iPhone, iPad, Galaxy 10.1	I know Bob's in-depth Part 2 will cover all this is detail, but I'd like to add that one great feature for "speed scanning" is that the 3600 has buttons on the scanner to initiate the scan, a separate one for each of the three scanning modes, B&W, Grayscale, and Color. Once set up, you can just place the book and press the appropriate button on the scanner. You don't have to reach and click in the software. That really speeds things up. (By set up, I mean what Bob talked about in his response above - have the page size adjusted, mode, folder, file prefix, etc., all set up for a particular book, including that pesky (at least to me) page rotate feature (which is quite handy).) Bob, I'm really looking forward to next installment. If you can figure out what criteria it uses to calculate 'odd' and 'even' on the page rotate feature, I'll be eternally grateful! (It probably doesn't help that I forget to set it until after I've started scanning. )

02-09-2007, 03:30 PM	#9
Bob Russell Recovering Gadget Addict Posts: 5,381 Karma: 676161 Join Date: May 2004 Location: Pittsburgh, PA Device: iPad	Thanks for mentioning the buttons, Studio717, because I really might not really say anything about them. I guess I basically ignored them because they weren't of interest to me. As far as the page rotate, I think it's not complicated. (Well, me trying to explain it here in words might sound complicated, but the idea is simple.) Here's the working assumption that I've made, and it's been useful for me so far: When you first start scanning, you are scanning page 1 no matter how the book is aligned or what you are scanning. So the sequence as far as OpticBook is concerned is always ODD, EVEN, ODD, etc Suppose you know the next scan is going to come out upside down (for example, if you "fool" the scanner by scanning two odd pages in a row, or two even pages in a row, or if you are rescanning the same page for a second time in a row). Then you just change the setting to the opposite value. In other words, if it is rotating odd pages, then set it to rotate even pages. And if it is currently rotating even pages, set it to rotate odd pages. That will get it back on track. If you approach it that way, I think you'll find it's less confusing, and you really don't have to know anything about how it calculates things internally. Just remember that OpticBook doesn't know which way you are laying the book down, so you can't determine much by whether the "real" page being scanned is an even or odd number in the book. One more note... if I remember correctly (maybe someone can help me out on this), the preview doesn't show the rotation (does it?). If that's true, then if you get lost, you can't really tell ahead of time whether that next scan will be upside down or not, without some mental gymnastics. In that case, I simply scan it and look to see what happens. If it's upside down, delete the scan and rescan it. It will be right side up next time, and then you can proceed. No change of settings is necessary.

02-11-2007, 02:07 PM	#11
Bob Russell Recovering Gadget Addict Posts: 5,381 Karma: 676161 Join Date: May 2004 Location: Pittsburgh, PA Device: iPad	Great observation Wizard-mag. I think overhead mounts for digital cameras is the way we will all be scanning books in the future. But it may be some time until that method can compete with OpticBook for the general book scanning user. I'd love to see some products appearing that are simply an overhead mount for good standard compact digital cams (like the Canon SD600 that I just got for $200). People are already buying them and the overhead mount can't be too expensive. Make it a bundle with overhead mount and OCR/Scanning software and it might be a very nice way to scan books... if there's no hidden "gotchas" to that approach. Thanks also to everyone for the interest in Part 2. It is coming, but please be patient as my schedule is a little crazy right now! I look forward to getting it ready.

02-11-2007, 04:11 PM	#13
RWood Technogeezer Posts: 7,233 Karma: 1601464 Join Date: Nov 2006 Location: Virginia, USA Device: Sony PRS-500	Well, the Book Time 5000 is slower than the Sony Reader at flipping pages.... Maybe we should take up a collection for Bob to buy a comic to test for Part 3 of the review.

Advert

Advert

02-11-2007, 05:40 PM	#14
nekokami fruminous edugeek Posts: 6,745 Karma: 551260 Join Date: Oct 2006 Location: Northeast US Device: iPad, eBw 1150	My point about the Book Time was just that you could set it up with the camera and go do something else while the pages are photographed and OCR'd. (Assuming it doesn't jam up.) I have an awful lot going on right now and I'm not sure I'd be able to squeeze in scanning my books a page at a time. Yet I'd really like to get my whole library digitized. Before I :shudder: move again....

02-12-2007, 02:56 AM	#15
sea2stars Zealot Posts: 104 Karma: 64 Join Date: Dec 2006 Device: eb1150, Sony Reader	grin Nekokami, here you go! How to Make a Full Auto Book Scanner