battery consumption drastically reduced by...

jian1 · 10-13-2011, 04:45 PM

disconnecting the speaker wire.

I have read a thread in Chinese Boox forum where people disconnect the speaker wires inside of M90. They all claim after that they were able to read for 3~4 weeks without recharging the battery.

Seems the speaker is the real culprit, can anyone confirm that?

pidgeon92 · 10-13-2011, 06:32 PM

I haven't the foggiest clue, but if people confirm that this works, I'll be yanking mine out.

PF4Mobile · 10-14-2011, 05:10 PM

Quote:

Originally Posted by jian1

disconnecting the speaker wire.

I have read a thread in Chinese Boox forum where people disconnect the speaker wires inside of M90. They all claim after that they were able to read for 3~4 weeks without recharging the battery.

Seems the speaker is the real culprit, can anyone confirm that?

that should also take away the blind sot issue.
In other words leave the speaker there and just disconnect the wiring.

Most of the speakers are inductive these days, I don't think that they use a magnet anymore.
Continuous voltage means continuous magnetic shield and that results in uninterrupted blind spot presence. That makes sense, I was wondering why it is happening since the speakers are not magnetic anymore.

thomas01155 · 10-14-2011, 06:59 PM

I get about 2-3 days with speaker. I'm a little bit wary of removing the speaker as I don't want to void the warranty just yet, the firmware seems very unstable with constant crashing.

forcheville · 10-19-2011, 09:35 PM

This is interesting, I may try it.
At onyxboox.com there is a shield available for fixing the blindspot problem. Instructions on the page tell you exactly how to open it and access the speaker.
http://www.onyxboox.com/product_info...9ts1ts1mltff53

jian1 · 10-20-2011, 08:05 PM

why can't they simply write a firmware that stops sending unnecessary current to speakers while in disuse?!?

forcheville · 10-21-2011, 07:11 PM

It turns out it is very easy to disconnect the speaker. You just unplug it from the circuitboard. Back is easy to take off. Clearly designed to make battery replacement possible. Battery plugs into circuitboard too.

Report on battery life to follow.

[Later] Plugged speaker back in after a day. The battery went flat even faster.
There are only two wires to the speaker and so it's unlikely that it uses an electromagnet.

jian1 · 10-22-2011, 10:15 PM

Quote:

Originally Posted by forcheville

It turns out it is very easy to disconnect the speaker. You just unplug it from the circuitboard. Back is easy to take off. Clearly designed to make battery replacement possible. Battery plugs into circuitboard too.

Report on battery life to follow.

[Later] Plugged speaker back in after a day. The battery went flat even faster.
There are only two wires to the speaker and so it's unlikely that it uses an electromagnet.

good to let us know...another urban legend proved...

PF4Mobile · 10-23-2011, 09:44 AM

Quote:

Originally Posted by forcheville

It turns out it is very easy to disconnect the speaker. You just unplug it from the circuitboard. Back is easy to take off. Clearly designed to make battery replacement possible. Battery plugs into circuitboard too.

Report on battery life to follow.

[Later] Plugged speaker back in after a day. The battery went flat even faster.
There are only two wires to the speaker and so it's unlikely that it uses an electromagnet.

No electro magnet then means permanent magnet (Am I wrong?) and that explains why the spot is always there. Disconnecting the speaker should not eliminate the blind spot. What happened in your case?

forcheville · 10-27-2011, 12:22 AM

I didn't check the blind spot because I almost never use the stylus.
The kit they give out to fix the blind spot gets you to put a shield (aluminium?) behind the speaker.

I didn't prise up the speaker so I didn't check if there were more wires connected to it from the back, but it seems unlikely given the published instructions for installing the shield.
So, only two wires feeding the speaker - draw your own conclusions.

Also, you can shut the unit off completely and you'll still detect magnetism over the speaker in the back panel using a small ferrous screw or nail.

gr650 · 10-27-2011, 05:49 AM

I didn't have any difference in battery runtime after disconnecting the speaker, just for the record. And I didn't have the blind spot to start with, either.

Onyx Europe · 10-27-2011, 06:25 AM

For my test device the blind spot disappeared after I've updated to the new firmware.

10-13-2011, 04:45 PM	#1
jian1 Banned Posts: 140 Karma: 5766 Join Date: Jan 2011 Device: Onyx Boox M92	battery consumption drastically reduced by... disconnecting the speaker wire. I have read a thread in Chinese Boox forum where people disconnect the speaker wires inside of M90. They all claim after that they were able to read for 3~4 weeks without recharging the battery. Seems the speaker is the real culprit, can anyone confirm that?

10-21-2011, 07:11 PM	#7
forcheville Zealot Posts: 104 Karma: 672100 Join Date: Dec 2008 Location: Melbourne, Australia Device: Sony prs650, Boox M92, Samsung Slate 7	It turns out it is very easy to disconnect the speaker. You just unplug it from the circuitboard. Back is easy to take off. Clearly designed to make battery replacement possible. Battery plugs into circuitboard too. Report on battery life to follow. [Later] Plugged speaker back in after a day. The battery went flat even faster. There are only two wires to the speaker and so it's unlikely that it uses an electromagnet. Last edited by forcheville; 10-22-2011 at 07:12 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do wireless printers effect battery consumption on Netbook using WiFi	Wetdogeared	Lounge	1	10-22-2010 01:24 PM
HTML load times drastically slower	motormanjh	Calibre	5	10-14-2010 09:44 PM
Screen Size and Battery Consumption	yagiz	News	5	01-08-2010 06:22 AM
This update will improve battery life drastically	jusmee	Astak EZReader	56	11-17-2009 11:13 PM
Battery consumption	ali	iRex	19	09-04-2006 04:09 PM

10-13-2011, 06:32 PM	#2
pidgeon92 Wizard Posts: 3,144 Karma: 8426142 Join Date: Jun 2008 Location: Chicago, IL Device: Kindle PW2, Kindle Voyage, Kindle DXG, Boox M90, Kobo Aura HD	I haven't the foggiest clue, but if people confirm that this works, I'll be yanking mine out.

10-14-2011, 06:59 PM	#4
thomas01155 Enthusiast Posts: 44 Karma: 3102 Join Date: Oct 2011 Device: none	I get about 2-3 days with speaker. I'm a little bit wary of removing the speaker as I don't want to void the warranty just yet, the firmware seems very unstable with constant crashing.

10-19-2011, 09:35 PM	#5
forcheville Zealot Posts: 104 Karma: 672100 Join Date: Dec 2008 Location: Melbourne, Australia Device: Sony prs650, Boox M92, Samsung Slate 7	This is interesting, I may try it. At onyxboox.com there is a shield available for fixing the blindspot problem. Instructions on the page tell you exactly how to open it and access the speaker. http://www.onyxboox.com/product_info...9ts1ts1mltff53

10-20-2011, 08:05 PM	#6
jian1 Banned Posts: 140 Karma: 5766 Join Date: Jan 2011 Device: Onyx Boox M92	why can't they simply write a firmware that stops sending unnecessary current to speakers while in disuse?!?

10-27-2011, 12:22 AM	#10
forcheville Zealot Posts: 104 Karma: 672100 Join Date: Dec 2008 Location: Melbourne, Australia Device: Sony prs650, Boox M92, Samsung Slate 7	I didn't check the blind spot because I almost never use the stylus. The kit they give out to fix the blind spot gets you to put a shield (aluminium?) behind the speaker. I didn't prise up the speaker so I didn't check if there were more wires connected to it from the back, but it seems unlikely given the published instructions for installing the shield. So, only two wires feeding the speaker - draw your own conclusions. Also, you can shut the unit off completely and you'll still detect magnetism over the speaker in the back panel using a small ferrous screw or nail.

10-27-2011, 05:49 AM	#11
gr650 Member Posts: 18 Karma: 172 Join Date: Oct 2011 Device: Boox M90	I didn't have any difference in battery runtime after disconnecting the speaker, just for the record. And I didn't have the blind spot to start with, either.

10-27-2011, 06:25 AM	#12
Onyx Europe Distributor Posts: 114 Karma: 66 Join Date: Mar 2011 Location: Netherlands Device: Onyx Boox M91S	For my test device the blind spot disappeared after I've updated to the new firmware.

Advert

Advert