Chapter detection for LRF

HenryP · 03-27-2009, 06:44 PM

Hello,
I'm having trouble with Calibre chapter detection for LRF output. I was advised to use the tag detection option with the following regular expression syntax: .*,class,Heading.
; i.e., where the attribute = 'Heading'. The 'Heading' attribute works like a charm on mobi and epub output but the chapters steadfastly refuse to appear on the Calibre viewer for LRF.
I must have misunderstood something but none of my attempts to figure this out has worked so far and I'd appreciate someone's help, here, please.

henry

gwynevans · 03-31-2009, 07:27 AM

Hmm - that would seem to match the documentation, at least. I'm not really familiar with it, but I'd be tempted to try to see if there was a way you could avoid the ".*" section and put in a specific tag?

kovidgoyal · 03-31-2009, 04:48 PM

post an extract from the source file showing one of these headings

HenryP · 03-31-2009, 07:30 PM

thanks for the response, and apologies for the tardiness in replying but I missed seeing the message until just now:
here's the code for chapter headings:

<p class=Heading>Chapter 1 Mercury V8</p>

<p class=MsoBodyTextCxSpFirst> </p>

henry

kovidgoyal · 03-31-2009, 07:56 PM

Use p,class,Heading and make sure you have Add chapters to TOC checked

HenryP · 03-31-2009, 08:45 PM

Thanks Kovid,
I've tried this a few times but the output file I see through Calibre viewer is invariably the same; i.e., it looks like it should in all respects except that it differs from the .mobi and .epub versions in that there's no visible Table of Contents.
I recognise that since everyone else has Headings as H1 or H2, and so on, I must have screwed up in that department right from the word 'Go' by having 'Heading'. I'm not too hot in the html syntax department yet but shall keep working on it.

hp

kovidgoyal · 03-31-2009, 09:27 PM

Ah the calibre LRF viewer doesn't suport Table of Contents. It will be there on the reader

You can check it if you want by running

lrf2lrs on the lrf file. In the output lrs file you will see a <TOC> tag

HenryP · 03-31-2009, 09:52 PM

Thanks, Kovid. That's good news.

hp

gwynevans · 04-02-2009, 07:16 AM

A better way to check if you can (i.e. you're running Windows) would be to use the Sony software, as that can show the contants.

Anyway, with the current upload, you've got a TOC with the chapters but the problems are that you've also got footnotes also appearing there first twice! The first set of "[1]" to "[51]" link to the footnotes at the end, while the second set link to their positions in the text. There's also a blank entry, which links to a blank page between Ch1 & Ch2. On the upside, the chapter links themselves are there & working, e.g. "Chapter 1 Mercury V8"

itimpi · 04-02-2009, 01:34 PM

This post has appeared in the wrong thread- and I do not seem to be able to delete it!

HenryP · 04-03-2009, 05:08 AM

Quote:

Originally Posted by gwynevans

A better way to check if you can (i.e. you're running Windows) would be to use the Sony software, as that can show the contants.

Anyway, with the current upload, you've got ... footnotes also appearing there ... twice! The first set of "[1]" to "[51]" link to the footnotes at the end, while the second set link to their positions in the text. There's also a blank entry, which links to a blank page between Ch1 & Ch2.

Thankyou, Gwyne, for your notice; I'm only able to see .mobi file output so your message if valuable.
I'll take your advice and download Sony ereader software to check the text out on my laptop. I hadn't realised that was an option.

A friend suggested I should not have uploaded all of volume one, that it's too much for the reader. She's right, I guess. But to hear what you've found inclines me to overwrite it with a single unreferences chapter and go back to the drawing board. An ebook with references running amok is not the ideal start for this story. Not to mention the fact that I've upset some folks with what I thought were uncontroversial statements.

henry

gwynevans · 04-03-2009, 05:55 AM

> I hadn't realised that was an option.

The UI's a bit basic, but it does do a decent representation of what it looks like on the reader.

> too much for the reader. She's right, I guess.

Not sure I'm familiar with that concept! :-) Seriously, it's your call, but it's not that unusual. My perception might be skewed as I tend to read a lot of SF&F, which means that Baen, who have a lot of free books, are one of the major players in the area I'm focussed on. Most, actually thinking about it, all of my recent eBook purchases have been as a result of first reading the author's free books then buying others of their's...

> go back to the drawing board.

Maybe - it seems to me that it might just be a matter of tagging more specifically, as the technique works.

> Not to mention the fact that I've upset some folks with what I thought were uncontroversial statements.

Ah! It's probably like software development these days, where you can hardly write "print 'Hello World'" without someone being ready to claim a patent infringment...

HenryP · 04-03-2009, 09:22 AM

It's Friday night, here, and I've been listening to Nashville session musicians on good quality equipment. Deeply satisfying.
I logged on before turning in and have just read your message. Just the ticket. I'm much obliged for your sober assessment.
henry

03-27-2009, 06:44 PM	#1
HenryP Enthusiast Posts: 43 Karma: 24 Join Date: Feb 2009 Location: Australia Device: Sony 505	Chapter detection for LRF Hello, I'm having trouble with Calibre chapter detection for LRF output. I was advised to use the tag detection option with the following regular expression syntax: .*,class,Heading. ; i.e., where the attribute = 'Heading'. The 'Heading' attribute works like a charm on mobi and epub output but the chapters steadfastly refuse to appear on the Calibre viewer for LRF. I must have misunderstood something but none of my attempts to figure this out has worked so far and I'd appreciate someone's help, here, please. henry

04-02-2009, 01:34 PM	#10
itimpi Wizard Posts: 4,553 Karma: 950151 Join Date: Nov 2008 Device: Sony PRS-950, iphone/ipad (Marvin/iBooks/QuickReader)	This post has appeared in the wrong thread- and I do not seem to be able to delete it! Last edited by itimpi; 04-02-2009 at 01:37 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with Chapter detection	ubergeeksov	Calibre	0	09-02-2010 05:56 AM
xpath for chapter detection	romnempire	Calibre	7	07-26-2010 06:34 PM
chapter detection in any book	yuki86	Calibre	9	05-06-2009 07:54 AM
Cant find help for chapter detection	fallwood	Calibre	6	12-10-2008 02:20 PM
Calibre chapter detection	AKninja04	Calibre	5	09-14-2008 01:09 PM

03-31-2009, 07:27 AM	#2
gwynevans Wizzard Posts: 1,402 Karma: 2000000 Join Date: Nov 2007 Location: UK Device: iPad 2, iPhone 6s, Kindle Voyage & Kindle PaperWhite	Hmm - that would seem to match the documentation, at least. I'm not really familiar with it, but I'd be tempted to try to see if there was a way you could avoid the ".*" section and put in a specific tag?

03-31-2009, 04:48 PM	#3
kovidgoyal creator of calibre Posts: 44,565 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	post an extract from the source file showing one of these headings

03-31-2009, 07:30 PM	#4
HenryP Enthusiast Posts: 43 Karma: 24 Join Date: Feb 2009 Location: Australia Device: Sony 505	thanks for the response, and apologies for the tardiness in replying but I missed seeing the message until just now: here's the code for chapter headings: <p class=Heading>Chapter 1 Mercury V8</p> <p class=MsoBodyTextCxSpFirst> </p> henry

03-31-2009, 07:56 PM	#5
kovidgoyal creator of calibre Posts: 44,565 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Use p,class,Heading and make sure you have Add chapters to TOC checked

03-31-2009, 08:45 PM	#6
HenryP Enthusiast Posts: 43 Karma: 24 Join Date: Feb 2009 Location: Australia Device: Sony 505	Thanks Kovid, I've tried this a few times but the output file I see through Calibre viewer is invariably the same; i.e., it looks like it should in all respects except that it differs from the .mobi and .epub versions in that there's no visible Table of Contents. I recognise that since everyone else has Headings as H1 or H2, and so on, I must have screwed up in that department right from the word 'Go' by having 'Heading'. I'm not too hot in the html syntax department yet but shall keep working on it. hp

03-31-2009, 09:27 PM	#7
kovidgoyal creator of calibre Posts: 44,565 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Ah the calibre LRF viewer doesn't suport Table of Contents. It will be there on the reader You can check it if you want by running lrf2lrs on the lrf file. In the output lrs file you will see a <TOC> tag

03-31-2009, 09:52 PM	#8
HenryP Enthusiast Posts: 43 Karma: 24 Join Date: Feb 2009 Location: Australia Device: Sony 505	Thanks, Kovid. That's good news. hp

04-02-2009, 07:16 AM	#9
gwynevans Wizzard Posts: 1,402 Karma: 2000000 Join Date: Nov 2007 Location: UK Device: iPad 2, iPhone 6s, Kindle Voyage & Kindle PaperWhite	A better way to check if you can (i.e. you're running Windows) would be to use the Sony software, as that can show the contants. Anyway, with the current upload, you've got a TOC with the chapters but the problems are that you've also got footnotes also appearing there first twice! The first set of "[1]" to "[51]" link to the footnotes at the end, while the second set link to their positions in the text. There's also a blank entry, which links to a blank page between Ch1 & Ch2. On the upside, the chapter links themselves are there & working, e.g. "Chapter 1 Mercury V8"

04-03-2009, 05:55 AM	#12
gwynevans Wizzard Posts: 1,402 Karma: 2000000 Join Date: Nov 2007 Location: UK Device: iPad 2, iPhone 6s, Kindle Voyage & Kindle PaperWhite	> I hadn't realised that was an option. The UI's a bit basic, but it does do a decent representation of what it looks like on the reader. > too much for the reader. She's right, I guess. Not sure I'm familiar with that concept! :-) Seriously, it's your call, but it's not that unusual. My perception might be skewed as I tend to read a lot of SF&F, which means that Baen, who have a lot of free books, are one of the major players in the area I'm focussed on. Most, actually thinking about it, all of my recent eBook purchases have been as a result of first reading the author's free books then buying others of their's... > go back to the drawing board. Maybe - it seems to me that it might just be a matter of tagging more specifically, as the technique works. > Not to mention the fact that I've upset some folks with what I thought were uncontroversial statements. Ah! It's probably like software development these days, where you can hardly write "print 'Hello World'" without someone being ready to claim a patent infringment...

04-03-2009, 09:22 AM	#13
HenryP Enthusiast Posts: 43 Karma: 24 Join Date: Feb 2009 Location: Australia Device: Sony 505	It's Friday night, here, and I've been listening to Nashville session musicians on good quality equipment. Deeply satisfying. I logged on before turning in and have just read your message. Just the ticket. I'm much obliged for your sober assessment. henry

Advert

Advert