problems with the 1.6 update

omicroncz · 06-25-2009, 03:21 PM

Today I have tried to update my DR to the 1.6 version, but I have experienced some problems.
First, the pen froze ,after a few seconds the buttons crashed too and I simply couldn`t use anything (except for the refresh button ).

At a second attempt (after re-installing the new software), every time i used the middle button the right and centre ones crashed .Soon after this the battery LED became red (and the device was charged).

I`m a bit disappointed...Has anyone experienced similar bugs?
Could it be crashing because I installed the update "manually" ?(Since I use Vista I can`t do it otherwise because the companion software is not working)

myprecious · 06-25-2009, 06:47 PM

Manual firmware update has nothing to do with the bugs your are describing - unless you did something wrong while updating.

omicroncz · 06-26-2009, 10:12 AM

Quote:

Originally Posted by myprecious

Manual firmware update has nothing to do with the bugs your are describing - unless you did something wrong while updating.

Oh well it`s good to know i suppose... Although installing v1.5 in the same way as v1.6 works very good, still the device has no response when I try to install the latter. I don`t have any idea what might be wrong...

I guess i`m stuck with the v1.5... (not complaining though (i love my DR)-still waay better than first versions-)
anyway,thanks for the answer!

myprecious · 06-26-2009, 11:21 AM

If there's nothing wrong with your updating the device, then something is wrong with the device itself. Start a ticket at the irex website and have it repaired or exchanged.

pthwaite · 06-26-2009, 06:50 PM

Try the Manual install as per the download and update instructions. Stick it on a clean SD card & then let it install. Occasionally I get hic-ups if I try to the "normal" route via windows PCs

06-25-2009, 03:21 PM	#1
omicroncz Junior Member Posts: 6 Karma: 10 Join Date: Jun 2009 Device: DR1000S	problems with the 1.6 update Today I have tried to update my DR to the 1.6 version, but I have experienced some problems. First, the pen froze ,after a few seconds the buttons crashed too and I simply couldn`t use anything (except for the refresh button ). At a second attempt (after re-installing the new software), every time i used the middle button the right and centre ones crashed .Soon after this the battery LED became red (and the device was charged). I`m a bit disappointed...Has anyone experienced similar bugs? Could it be crashing because I installed the update "manually" ?(Since I use Vista I can`t do it otherwise because the companion software is not working)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problems with locked book (ADE) Kobo store after update	taming	Kobo Reader	0	07-14-2010 05:05 AM
Firmware Update Can I reinstall the official amazon update after the update file from this site ?	yuenslhk	Amazon Kindle	2	06-20-2010 12:24 PM
Hacks K2 new update problems with screensaver hack	ruddell	Amazon Kindle	6	01-01-2010 05:27 PM
Firmware Update Any problems with skipping an update?	sbell1	Amazon Kindle	6	04-22-2009 06:00 PM
PRS-500 What file to change to re-update reader with latest update?	pitolee	Sony Reader Dev Corner	2	05-25-2007 12:56 AM

06-25-2009, 06:47 PM	#2
myprecious Zealot Posts: 100 Karma: 28 Join Date: Mar 2009 Location: Nowy Targ, Poland Device: DR1000S	Manual firmware update has nothing to do with the bugs your are describing - unless you did something wrong while updating.

06-26-2009, 11:21 AM	#4
myprecious Zealot Posts: 100 Karma: 28 Join Date: Mar 2009 Location: Nowy Targ, Poland Device: DR1000S	If there's nothing wrong with your updating the device, then something is wrong with the device itself. Start a ticket at the irex website and have it repaired or exchanged.

06-26-2009, 06:50 PM	#5
pthwaite Fanatic Posts: 597 Karma: 430 Join Date: Aug 2008 Location: Ellesmere Port, UK Device: DR1000S Sony PRS505 iPad iPhone	Try the Manual install as per the download and update instructions. Stick it on a clean SD card & then let it install. Occasionally I get hic-ups if I try to the "normal" route via windows PCs

Advert

Advert