![]() |
#1 |
Home Guard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 4,730
Karma: 86721650
Join Date: Jun 2007
Location: Alpha Ralpha Boulevard
Device: Kindle Oasis 3G, iPhone 6
|
Reader resets when connected to USB
Here's what happened.
I did the direct page control hack and didn't like it, so I reflashed with the Universal flasher. Everything seems fine. Next I did the joystick hack with history using the volume buttons. Everything seemed fine until I connected to my computer a few hours later and found that if the CONNECT software is running the Reader resets itself and continues to reset as long as CONNECT is running. If I disconnect it starts normally. It does it on both my computers, so I don't think it's the Connect software. If CONNECT isn't running I get the usual USB screen. I've reflashed it with the Universal flasher (clock only) and did the routine to erase everything and return it to factory settings. I also changed USB cables and recharged the Reader with the wall outlet but I still have the same problem. Any suggestions? Thanks. |
![]() |
![]() |
![]() |
#2 |
Resident Curmudgeon
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 75,699
Karma: 134319572
Join Date: Nov 2006
Location: Roslindale, Massachusetts
Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3
|
Try reflashing the firmware. But you'll need to unzip the exe for the updater and the file you want is PRSVersion.dat located in ebookupdater\assets\updaterassets. Change the version # so it won't see that you already have that version. Then run PRS-500 Updater.exe and see what happens from there.
|
![]() |
![]() |
Advert | |
|
![]() |
#3 |
Home Guard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 4,730
Karma: 86721650
Join Date: Jun 2007
Location: Alpha Ralpha Boulevard
Device: Kindle Oasis 3G, iPhone 6
|
Thanks, that did it.
|
![]() |
![]() |
![]() |
#4 |
Home Guard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 4,730
Karma: 86721650
Join Date: Jun 2007
Location: Alpha Ralpha Boulevard
Device: Kindle Oasis 3G, iPhone 6
|
I do want to point out that it's easier to find the update files if you open the updater with Winzip rather than the self-extracter.
|
![]() |
![]() |
![]() |
#5 |
Resident Curmudgeon
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 75,699
Karma: 134319572
Join Date: Nov 2006
Location: Roslindale, Massachusetts
Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3
|
|
![]() |
![]() |
Advert | |
|
![]() |
#6 |
Resident Curmudgeon
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 75,699
Karma: 134319572
Join Date: Nov 2006
Location: Roslindale, Massachusetts
Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3
|
|
![]() |
![]() |
![]() |
#7 |
Home Guard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 4,730
Karma: 86721650
Join Date: Jun 2007
Location: Alpha Ralpha Boulevard
Device: Kindle Oasis 3G, iPhone 6
|
Some of them. I have the clock, the smaller menu fonts, and the icon set.
|
![]() |
![]() |
![]() |
#8 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 67
Karma: 813
Join Date: Jun 2007
Location: Massachusetts, USA
Device: Kindle Paperwhite 2, FW:5.6.1
|
I am having a similar problem. Whenever I connect my PRS-500 to USB it tells me USB is connected, then 2 seconds later it resets itself. This happens regardless of whether Sony Ebook Library is running. Yesterday I applied the universal flasher using main.xml and applicationstart.xml to get smaller fonts in the book list, and page turns with the joystick. I also put in a different font, renaming it appropriately.
I have tried doing a hard reset, which cleared all the data, but when I powered back on, I could still see the effects of the flasher and I still had the problem with USB connection causing reset. I did the 10 reset method, but after the 10th reset it just booted up normally. I tried reverting to factory settings from the Reader's Settings menu, but that didn't make any difference. I'm unable to run the PRS-500 firmware updater because connecting my Reader to USB automatically causes it to reset. I'm in Ukraine and my options are limited. Any ideas? EDIT: Sorry, I was able to fix this using my SD Card. Last edited by bookbinder; 03-04-2008 at 02:56 AM. Reason: FIXED |
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jetboo Lite shuts down when connected to PC via usb. | GrouchoM | Ectaco jetBook | 14 | 05-30-2010 07:00 PM |
Reading on your K2i while connected via USB | brecklundin | Amazon Kindle | 2 | 01-20-2010 07:33 PM |
LED in upper, left corner is red when connected With USB cable | ebookenthusiast | OpenInkpot | 4 | 10-29-2009 07:48 AM |
My Sony Reader only shows: "USB connected" | luisbeltran | Sony Reader | 12 | 02-20-2009 10:15 PM |
PRS-505: USB connected screen | willpooted | Sony Reader | 1 | 11-07-2007 10:38 AM |