PRS 505 Firmware Update

mechinnovation · 01-26-2008, 03:31 PM

Hi All, I'm completely new to this so please forgive me if this is the wrong place to start but I've got a MAJOR problem with my PRS 505, and if someone here can't help me no-one can.

It all started when after only 24hrs of ownership I plugged a USB cable in when the devise was on standby and device lock was activated. The unit came out of stand by and said devise locked, but didn't give me the option of entering the number sequence. Anyway I couldn't get it out of this state whatever I did. I finally went for the reset button on the back. The device would then not boot up past the start up page. I did this a number of times with various other key presses in between. I realised at this point I was in deep trouble. I finally found something on the web that instructed on how to recover from a bad crash so that it would ask you to update the firmware. Unfortunately this advice was meant for the 500 not the 505. It worked but I don't have a 505 firmware updater. I read somewhere that Sony are intending to release a firmware update end of Feb/March, which I guess I can wait for, but it's a shame not to be able to use it until then particularly after such a same mistake. Has anyone else had a similar experience and recovered their device, if so, can you help me? Thanks in advance, Simon

JSWolf · 01-26-2008, 04:59 PM

Why not contact Sony? If it is in warranty and you live in the US, then you can get it sorted fairly easily.

mechinnovation · 01-26-2008, 05:22 PM

I don't live in the US, and that's the problem. I'm from the UK and I can't imagine Sony being very cooperative in this matter.

gwynevans · 01-26-2008, 05:31 PM

Does it mount as a USB device in that state? Have you ensured it's charged up correctly (a PSP charger will work if you have one).

mechinnovation · 01-26-2008, 05:36 PM

Yep, its fully charged. No you can't mount it as a USB devise in this state. What worries me is that this was such an innocent 'mistake' to make. Good to know about the PSP charger though, I didn't know that thanks.

NatCh · 01-26-2008, 05:52 PM

The thing you wanted to do was a hard reset. I don't know if it'll still work with it caught in an update loop, but it won't hurt anything to try it. You can find the instructions here.

mechinnovation · 01-26-2008, 06:15 PM

I tried this and I think you right, I should have done this before. It doesn't help now. I'll have to wait for that first patch. Thanks for your input everyone. Regards Simon

gwynevans · 01-31-2008, 07:57 AM

The info & link here might help, but no guarantees!

mechinnovation · 01-31-2008, 08:10 AM

maybe i'll give this a go if I decide to be adventurous. Thanks Simon

JSWolf · 01-31-2008, 04:31 PM

Quote:

Originally Posted by mechinnovation

I don't live in the US, and that's the problem. I'm from the UK and I can't imagine Sony being very cooperative in this matter.

You could email Sony and tell them of your problem and see if they can sort it via email. If not, find someone to send it to in the USA to take it in for warranty repair. I can check if it's OK and take it to the Sony Style Store for warranty repair. I could do it as long as you pay for all the shipping.

mechinnovation · 02-01-2008, 05:37 AM

Hi John, thats very kind of you and I may well take you up on it. I will however try installing the first Firmware update when it comes out. I know it will be 4 weeks or more, but a the moment its difficult to justify spending 10's of dollars on a problem that might well fix itself in a few weeks. Thanks again anyway. And if that firmware update doesn't work I will definatelly take you up on your kind offer.

Simon

lookasz · 02-14-2008, 01:27 PM

Any news about update, or possibility to unbrick prs-505 ?

mechinnovation · 02-14-2008, 01:34 PM

I check the website every couple of days, but nothing so far. I've read somewhere that it should be the end of this month, but could be end of next month :-(

pettitoes · 03-21-2008, 06:31 AM

I need new firmware so much. Waiting

obelix · 03-21-2008, 10:54 AM

Quote:

Originally Posted by pettitoes

I need new firmware so much. Waiting

Currently there is only one method to restore PRS-505 from scratch: disassemble the Reader and upload the image via console (wires). Checked on several PRS-505 Readers.

Complete procedure is here (in Russian).

http://www.the-ebook.org/forum/viewt...t=7577&start=0

01-26-2008, 03:31 PM	#1
mechinnovation Junior Member Posts: 7 Karma: 10 Join Date: Jan 2008 Device: PRS 505	PRS 505 Firmware Update Hi All, I'm completely new to this so please forgive me if this is the wrong place to start but I've got a MAJOR problem with my PRS 505, and if someone here can't help me no-one can. It all started when after only 24hrs of ownership I plugged a USB cable in when the devise was on standby and device lock was activated. The unit came out of stand by and said devise locked, but didn't give me the option of entering the number sequence. Anyway I couldn't get it out of this state whatever I did. I finally went for the reset button on the back. The device would then not boot up past the start up page. I did this a number of times with various other key presses in between. I realised at this point I was in deep trouble. I finally found something on the web that instructed on how to recover from a bad crash so that it would ask you to update the firmware. Unfortunately this advice was meant for the 500 not the 505. It worked but I don't have a 505 firmware updater. I read somewhere that Sony are intending to release a firmware update end of Feb/March, which I guess I can wait for, but it's a shame not to be able to use it until then particularly after such a same mistake. Has anyone else had a similar experience and recovered their device, if so, can you help me? Thanks in advance, Simon

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-505 Another Failed Firmware update PRS-505	himitsu	Sony Reader	8	03-21-2010 11:32 AM
SONY PRS-505 Firmware-Update + Customizing	Thoran	Sony Reader	108	09-02-2009 08:24 AM
Help - can't update my PRS-505 firmware	lobo	Sony Reader Dev Corner	6	09-11-2008 10:33 PM
PRS-505 FIRMWARE update is out!	igorsk	News	15	07-29-2008 10:06 PM
Any update on the firmware flash for the 505?	hamh	Sony Reader Dev Corner	6	11-18-2007 10:46 AM

01-26-2008, 04:59 PM	#2
JSWolf Resident Curmudgeon Posts: 76,435 Karma: 136564696 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Why not contact Sony? If it is in warranty and you live in the US, then you can get it sorted fairly easily.

01-26-2008, 05:22 PM	#3
mechinnovation Junior Member Posts: 7 Karma: 10 Join Date: Jan 2008 Device: PRS 505	I don't live in the US, and that's the problem. I'm from the UK and I can't imagine Sony being very cooperative in this matter.

01-26-2008, 05:31 PM	#4
gwynevans Wizzard Posts: 1,402 Karma: 2000000 Join Date: Nov 2007 Location: UK Device: iPad 2, iPhone 6s, Kindle Voyage & Kindle PaperWhite	Does it mount as a USB device in that state? Have you ensured it's charged up correctly (a PSP charger will work if you have one).

01-26-2008, 05:36 PM	#5
mechinnovation Junior Member Posts: 7 Karma: 10 Join Date: Jan 2008 Device: PRS 505	Yep, its fully charged. No you can't mount it as a USB devise in this state. What worries me is that this was such an innocent 'mistake' to make. Good to know about the PSP charger though, I didn't know that thanks.

01-26-2008, 05:52 PM	#6
NatCh Gizmologist Posts: 11,615 Karma: 929550 Join Date: Jan 2006 Location: Republic of Texas Embassy at Jackson, TN Device: Pocketbook Touch HD3	The thing you wanted to do was a hard reset. I don't know if it'll still work with it caught in an update loop, but it won't hurt anything to try it. You can find the instructions here.

01-26-2008, 06:15 PM	#7
mechinnovation Junior Member Posts: 7 Karma: 10 Join Date: Jan 2008 Device: PRS 505	I tried this and I think you right, I should have done this before. It doesn't help now. I'll have to wait for that first patch. Thanks for your input everyone. Regards Simon

01-31-2008, 07:57 AM	#8
gwynevans Wizzard Posts: 1,402 Karma: 2000000 Join Date: Nov 2007 Location: UK Device: iPad 2, iPhone 6s, Kindle Voyage & Kindle PaperWhite	The info & link here might help, but no guarantees!

01-31-2008, 08:10 AM	#9
mechinnovation Junior Member Posts: 7 Karma: 10 Join Date: Jan 2008 Device: PRS 505	maybe i'll give this a go if I decide to be adventurous. Thanks Simon

02-01-2008, 05:37 AM	#11
mechinnovation Junior Member Posts: 7 Karma: 10 Join Date: Jan 2008 Device: PRS 505	Hi John, thats very kind of you and I may well take you up on it. I will however try installing the first Firmware update when it comes out. I know it will be 4 weeks or more, but a the moment its difficult to justify spending 10's of dollars on a problem that might well fix itself in a few weeks. Thanks again anyway. And if that firmware update doesn't work I will definatelly take you up on your kind offer. Simon

02-14-2008, 01:27 PM	#12
lookasz Junior Member Posts: 4 Karma: 10 Join Date: Jan 2008 Device: sony prs-505	Any news about update, or possibility to unbrick prs-505 ?

Advert

Advert

02-14-2008, 01:34 PM	#13
mechinnovation Junior Member Posts: 7 Karma: 10 Join Date: Jan 2008 Device: PRS 505	I check the website every couple of days, but nothing so far. I've read somewhere that it should be the end of this month, but could be end of next month :-(

03-21-2008, 06:31 AM	#14
pettitoes Junior Member Posts: 3 Karma: 10 Join Date: Mar 2008 Device: SONY PRS 505	I need new firmware so much. Waiting