Cutting Books

katysax · 06-10-2009, 08:40 PM

I want to convert some of my library of books that are not available for purchase in ebook format into ebooks. So, I've been cutting the binding with a box knife, feeding the pages into a dual sided fujitsu scanner and using Acrobat to combine the files into a single book. This method makes a pdf version of a book very easily. But the hardest part is cutting the book.

What is the best method and tools for cutting paper back books for scanning?

igorsk · 06-11-2009, 09:15 AM

If it's a paperback, it can usually be debound by applying some heat to the spine which softens or melts the glue. There are many approaches: oven, iron, microwave or a hairdryer.
I think I've also heard Kinko's can strip the spine for you, if you have one nearby.

HarryT · 06-11-2009, 09:19 AM

If you have a local printer, they will generally cut it for you with their guillotine for a nominal fee.

mdibella · 06-11-2009, 09:54 AM

I use a large exacto knife and a metal ruler. Not subtle, but it works fine.

=X= · 06-11-2009, 11:46 AM

Quote:

Originally Posted by katysax

What is the best method and tools for cutting paper back books for scanning?

I'm not sure it's the best method, but I used a 12" miter saw to cut two books. The total time took about 25 min, time to cut took 2min per book.

The cuts where straight so the actual scanning process was great, no skewed images or jammed leafs.

Quote:

Originally Posted by igorsk

If it's a paperback, it can usually be debound by applying some heat to the spine which softens or melts the glue.

Great idea, how long does this process take.

Quote:

Originally Posted by igorsk

I think I've also heard Kinko's can strip the spine for you, if you have one nearby.

I had some flyers cut at kinko's it was $1.25, I wasn't sure they would cut books this might be the best solution.

=X=

Blackguard · 06-11-2009, 03:23 PM

Yes by all means take it to Kinkos and let them cut the spine. I've done it with several large textbooks and it's taken less than 5 minutes and less than 3 dollars each time I've had it done.

katysax · 06-11-2009, 07:41 PM

Thanks I checked out the local Office Max and they said they would cut the spine for $1.09. Even a couple bucks is worth it. Cutting by hand is a pain. The actual scanning is easy and quick but the cutting the books without the right tools is too hard. An exacto knife is too much work.

Cabe · 06-11-2009, 08:42 PM

Gideon · 06-12-2009, 07:14 PM

They can also rebind the book for a pretty nominal cost. Not with the original binding, but still...

I took something in today. Now that I have a DX, its worth my time to scan some things.

ahi · 06-12-2009, 07:41 PM

Quote:

Originally Posted by Gideon

Now that I have a DX, its worth my time to scan some things.

Did the extreme weather condition turn out to be a doughnut shop on the way?

- Ahi

RickyMaveety · 06-12-2009, 09:50 PM

Quote:

Originally Posted by mdibella

I use a large exacto knife and a metal ruler. Not subtle, but it works fine.

That is also my method. I find that with a bit of pressure I can go through several pages at a time. Of course, I don't have a Kinko's anywhere near me, and it's not worth the $20 in gas it would take to get to one.

I hesitate to put things in the microwave simply because I've managed to destroy so much stuff in there.

Gideon · 06-12-2009, 09:55 PM

Quote:

Originally Posted by ahi

Did the extreme weather condition turn out to be a doughnut shop on the way?

- Ahi

I have no earthly idea what it was. But that is my guess, yeah.

The book I took was actually the Bicameral Mind book..

I'm scanning it right now! Almost done!

Linus · 06-15-2009, 01:31 AM

Ugh! I worked for a printing company a few years ago. You guys bring back some bad memories of all the books we had to scan. At least my department got $60 per hour to cut the spine, scan and format (OCR).

My advice. Look into a used Xerox digipath system. I good cutter can be used for the spice. Do not try to melt the glue in a perfect bound book. The temperaures used to melt that glue are high, and the damamge it will do to your scanner is more than you can imagine.

My advice. Read your books and pass them on to others and don't worry about the scanning unless they are really valuable to you.

Andybaby · 06-15-2009, 04:08 AM

Quote:

Originally Posted by Linus

Ugh! I worked for a printing company a few years ago. You guys bring back some bad memories of all the books we had to scan. At least my department got $60 per hour to cut the spine, scan and format (OCR).

My advice. Look into a used Xerox digipath system. I good cutter can be used for the spice. Do not try to melt the glue in a perfect bound book. The temperaures used to melt that glue are high, and the damamge it will do to your scanner is more than you can imagine.

My advice. Read your books and pass them on to others and don't worry about the scanning unless they are really valuable to you.

I'm available for cutting and scanning books for $60 an hour. I'm quiet and I do my work

katysax · 06-15-2009, 01:31 PM

The scanning is the easy part. The Fujitsu S1500 scanner does dual sided scanning with ease, and its paper handling is fantastic. It will take sheets of different sizes and cuts and even raggedly cut and handle them perfectly. It is also very fast and very compact. The "hard" part is cutting the books.

06-10-2009, 08:40 PM	#1
katysax Enthusiast Posts: 44 Karma: 222 Join Date: May 2009 Location: Los Angeles Device: Kindle2, Kindle DX, prs 505	Cutting Books I want to convert some of my library of books that are not available for purchase in ebook format into ebooks. So, I've been cutting the binding with a box knife, feeding the pages into a dual sided fujitsu scanner and using Acrobat to combine the files into a single book. This method makes a pdf version of a book very easily. But the hardest part is cutting the book. What is the best method and tools for cutting paper back books for scanning?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carpet Cutting Puzzle	pdurrant	Lounge	19	08-10-2010 06:18 PM
Cake Cutting Puzzle	pdurrant	Lounge	27	07-07-2010 05:36 AM
The Bittersweet Art of Cutting Up Books	Madam Broshkina	Lounge	2	09-26-2008 09:05 PM
Improved the case by cutting a hole	KlondikeGeoff	Amazon Kindle	3	03-06-2008 07:11 PM
Cutting the Line	sUnShInE	Lounge	2	06-03-2004 10:05 AM

06-11-2009, 09:15 AM	#2
igorsk Wizard Posts: 3,442 Karma: 300001 Join Date: Sep 2006 Location: Belgium Device: PRS-500/505/700, Kindle, Cybook Gen3, Words Gear	If it's a paperback, it can usually be debound by applying some heat to the spine which softens or melts the glue. There are many approaches: oven, iron, microwave or a hairdryer. I think I've also heard Kinko's can strip the spine for you, if you have one nearby.

06-11-2009, 09:19 AM	#3
HarryT eBook Enthusiast Posts: 85,544 Karma: 93383043 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	If you have a local printer, they will generally cut it for you with their guillotine for a nominal fee.

06-11-2009, 09:54 AM	#4
mdibella Groupie Posts: 193 Karma: 1107 Join Date: Oct 2007 Device: Infinite Kindles, Occasional Sony's	I use a large exacto knife and a metal ruler. Not subtle, but it works fine.

06-11-2009, 03:23 PM	#6
Blackguard Enthusiast Posts: 29 Karma: 14 Join Date: Feb 2008 Device: Kindle 2	Yes by all means take it to Kinkos and let them cut the spine. I've done it with several large textbooks and it's taken less than 5 minutes and less than 3 dollars each time I've had it done.

06-11-2009, 07:41 PM	#7
katysax Enthusiast Posts: 44 Karma: 222 Join Date: May 2009 Location: Los Angeles Device: Kindle2, Kindle DX, prs 505	Thanks I checked out the local Office Max and they said they would cut the spine for $1.09. Even a couple bucks is worth it. Cutting by hand is a pain. The actual scanning is easy and quick but the cutting the books without the right tools is too hard. An exacto knife is too much work.

06-11-2009, 08:42 PM	#8
Cabe Connoisseur Posts: 99 Karma: 403 Join Date: Jul 2006 Location: Portsmouth, UK Device: Sony PRS-505, iPhone

06-12-2009, 07:14 PM	#9
Gideon Wearer of Pants Posts: 1,050 Karma: 7634 Join Date: Jan 2008 Location: Norman, OK Device: Amazon Kindle DX / iPhone	They can also rebind the book for a pretty nominal cost. Not with the original binding, but still... I took something in today. Now that I have a DX, its worth my time to scan some things.

06-15-2009, 01:31 AM	#13
Linus Nameless Being	Ugh! I worked for a printing company a few years ago. You guys bring back some bad memories of all the books we had to scan. At least my department got $60 per hour to cut the spine, scan and format (OCR). My advice. Look into a used Xerox digipath system. I good cutter can be used for the spice. Do not try to melt the glue in a perfect bound book. The temperaures used to melt that glue are high, and the damamge it will do to your scanner is more than you can imagine. My advice. Read your books and pass them on to others and don't worry about the scanning unless they are really valuable to you.

06-15-2009, 01:31 PM	#15
katysax Enthusiast Posts: 44 Karma: 222 Join Date: May 2009 Location: Los Angeles Device: Kindle2, Kindle DX, prs 505	The scanning is the easy part. The Fujitsu S1500 scanner does dual sided scanning with ease, and its paper handling is fantastic. It will take sheets of different sizes and cuts and even raggedly cut and handle them perfectly. It is also very fast and very compact. The "hard" part is cutting the books.

Advert

Advert