Eco Reader Help

smd79 · 07-31-2010, 03:16 AM

Hi

I recently got my Eco Reader, but have run into to few problems.

I charged the reader up as per instructions and went to connect the Reader to my PC (running Windows 7) the device was detected and installed. My computer showed the 2 additional drives mentioned in the instructions, however the drive for the ECO reader itself came up as unformatted.
Adobe DE will not detect the reader either are the 2 issues related?

I've tried my other USB ports but the result is the same.

As where can I download the latest firmware for the Eco Reader?, the Eco Reader site just an email address to be added to notification list for new firmware updates.

Update: I tested the reader with a SD card (actually a micro SD with SD card converter) and it worked fine. Adobe DE detected the SD card and allowed me to authorize it and the ECO Reader was able to read the card and all the Epubs I copied to it flawlessly. Something dodgy with the internal memory of the reader?

AlexBell · 08-01-2010, 05:48 AM

Quote:

Originally Posted by smd79

As where can I download the latest firmware for the Eco Reader?, the Eco Reader site just an email address to be added to notification list for new firmware updates.

Update: I tested the reader with a SD card (actually a micro SD with SD card converter) and it worked fine. Adobe DE detected the SD card and allowed me to authorize it and the ECO Reader was able to read the card and all the Epubs I copied to it flawlessly. Something dodgy with the internal memory of the reader?

I'm afraid I really can't help you with the ECO Reader connection problem, since I have always put ebooks directly on the SD card through an SD card reader. I've never had a problem doing it that way

So far as the firmware updates are concerned I think you'll find that you go on the mailing list automatically when you buy the ECO Reader, and they will inform you when a new update is available. There hasn't been an upgrade for a while now.

So far as I know my reader has the latest firmware, which is V2.20AU.091028.
Page 28 of the manual tells you how to check what firmware level your reader has.

Finally, CBell works for ECO Reader and is a member of MobileRead Forums, and has always been very helpful.

Regards, Alex

teemac · 08-01-2010, 02:41 PM

There is one newer update on the download site:
V3update-AU-2.20-20100311.zip

I don't think I am supposed to publish the URL for it, so you will have to contact DA Direct and ask for the link.

cbell · 08-02-2010, 01:37 AM

Thanks, Alex and teemac

smd79 has a V3+ ECO Reader, so the firmware is a different version to yours, but thank you both very much for responding. We're in touch by email, sorting this out.

AlexBell · 08-02-2010, 05:31 AM

Quote:

Originally Posted by cbell

Thanks, Alex and teemac

smd79 has a V3+ ECO Reader, so the firmware is a different version to yours, but thank you both very much for responding. We're in touch by email, sorting this out.

Thanks, Christine. Is there a later firmware upgrade than the one on my ECO reader that I quoted above?

Regards, Alex

cbell · 08-02-2010, 08:07 PM

Alex, teemac is correct - there's a later version than you're running.

Latest firmware:

ECO Reader (V3, 4 greyscale) <V3update-AU-2.20-20100311.zip> (11/03/2010)
ECO Reader (V3+, 16 greyscale) <v3asetup.2.02AU.100722.TTS.zip> (22/07/2010)
ECO Eclipse <v5setup.2.02AU.100524.zip> (24/05/2010)

AlexBell · 08-03-2010, 05:45 AM

Quote:

Originally Posted by cbell

Alex, teemac is correct - there's a later version than you're running.

Latest firmware:

ECO Reader (V3, 4 greyscale) <V3update-AU-2.20-20100311.zip> (11/03/2010)
ECO Reader (V3+, 16 greyscale) <v3asetup.2.02AU.100722.TTS.zip> (22/07/2010)
ECO Eclipse <v5setup.2.02AU.100524.zip> (24/05/2010)

Thanks, I must have missed the notification. I'll go look for it.

Regards, Alex

smd79 · 08-03-2010, 11:00 PM

Thanks for the replies, I resolved the issue by reformatting the readers drive.
Mind you for some reason the reader will not function on some of my USB ports (even through the ports are in perfect working order).

I've successfully uploaded my epubs to it.

cbell · 08-04-2010, 03:42 AM

I'll let the ECO Reader helpdesk know their suggestion fixed your problem, smd79.

Thanks for letting us know all's well now

teemac · 09-26-2010, 08:30 AM

@cbell - Christine, I have just purchased a new ECO Reader V3+ to replace the old V3 I bought last year - also need the new V3+ firmware link.

Have PM'd you.

Thanks.

cbell · 09-26-2010, 09:01 AM

I saw your order, teemac and I pm'd you last week. I don't see your pm, though... I will email you the link tomorrow (I have your email address). Thank you for your order!

pwarren · 11-08-2010, 10:15 PM

I'd also like a link to the latest v3+ firmware, mine seem to be running 2.02AU.100505,

And I'm hoping that the later firmware fixes problems connecting my ecoreader to a Mac.

I have emailed service at ecoreader dot com but have yet to receive a reply after 48 hours, maybe I'm being hasty

iq6000 · 12-01-2010, 06:12 AM

Just wanted to say thanks everyone for your help.
I bought my ECO Reader and realised it needed a firmware update.
I was sent the link to the update and, well, I sort of followed the instructions - except that I only had a 2GB SD card and the instructions said use a 1GB or less card to install the update.
Decided to give it a go - it wouldn't do any harm, right?
Well I couldn't get it to start the upload process - just a blank screen.
"Oh well", I thought "I am sure I have a smaller SD card somewhere in the house (it is in my daughter's camera - but who knows where the camera is?) - I will worry about it later. " My husband was trying to hurry me up so I would go to work with him (on MY day off work), so I packed the reader and left the house. When I got to his workshop I opened the reader - but the book I was reading wasn't there. No big deal - it is on the computer at home, I will just read something else. There were only a few books on the reader though, instead of about 100. "That's OK - I will fix it when I get home."
Yeah - 6 hours later. I attempted the update again with the 2GB card. I wanted to make sure I had otherwise followed the instructions exactly.
Success! Firmware updated! Despite the 2GB card.
But the books! Somehow the reader's drive was reporting 56GB of files, which were corrupted and couldn't be opened, deleted or renamed. The files were dated from 1/1/1604 to May 2047.
56 gigabytes - pretty impressive for an ECO Reader!! I was impressed, anyway....
I tried a few things but no luck. I knew I could get rid of the corrupt files by formatting, but I have always seen that as a bit of a risky procedure - so easy to get wrong!!
So I logged on to this forum, did a bit of searching and reading and found the confidence to go ahead with the format.
It worked perfectly - I formatted the drive and was then able to copy all my books back. And because I was starting from scratch I could easily reorganise the whole file setup with new folders and sub folders and all the books are now in categories.
I love categories!
So now I have an up to date reader, all my books organised - now I just need to make time to read more!!!

Thanks,
Angela

07-31-2010, 03:16 AM	#1
smd79 Junior Member Posts: 2 Karma: 10 Join Date: Jul 2010 Device: Eco Reader	Eco Reader Help Hi I recently got my Eco Reader, but have run into to few problems. I charged the reader up as per instructions and went to connect the Reader to my PC (running Windows 7) the device was detected and installed. My computer showed the 2 additional drives mentioned in the instructions, however the drive for the ECO reader itself came up as unformatted. Adobe DE will not detect the reader either are the 2 issues related? I've tried my other USB ports but the result is the same. As where can I download the latest firmware for the Eco Reader?, the Eco Reader site just an email address to be added to notification list for new firmware updates. Update: I tested the reader with a SD card (actually a micro SD with SD card converter) and it worked fine. Adobe DE detected the SD card and allowed me to authorize it and the ECO Reader was able to read the card and all the Epubs I copied to it flawlessly. Something dodgy with the internal memory of the reader? Last edited by smd79; 07-31-2010 at 03:49 AM. Reason: Update information

11-08-2010, 10:15 PM	#12
pwarren Connoisseur Posts: 95 Karma: 186186 Join Date: May 2009 Location: Canberra, Australia Device: Irex Iliad (Dead), EcoReader (Smashed screen), Kobo Touch	I'd also like a link to the latest v3+ firmware, mine seem to be running 2.02AU.100505, And I'm hoping that the later firmware fixes problems connecting my ecoreader to a Mac. I have emailed service at ecoreader dot com but have yet to receive a reply after 48 hours, maybe I'm being hasty Last edited by pwarren; 11-09-2010 at 10:16 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Mac can't see my eco-reader	Bodleian	Which one should I buy?	19	11-19-2010 08:13 AM
Help - Eco Reader vs Eco Eclipse vs Kogan	lala85	Which one should I buy?	1	10-08-2010 05:34 AM
Sell ECO reader (Hanlinv3)	troykm	Flea Market	2	02-15-2010 11:41 AM
Avoid ECO Reader!	r1chardj0n3s	HanLin eBook	15	01-23-2010 06:22 AM
Eco Reader - first impressions	paul1403	Which one should I buy?	7	12-09-2009 02:22 AM

08-01-2010, 02:41 PM	#3
teemac Member Posts: 21 Karma: 140 Join Date: Jan 2010 Location: NSW, Australia Device: ECO Reader V3ext, ECO Reader V3+	There is one newer update on the download site: V3update-AU-2.20-20100311.zip I don't think I am supposed to publish the URL for it, so you will have to contact DA Direct and ask for the link.

08-02-2010, 01:37 AM	#4
cbell Frenetic Posts: 590 Karma: 8181 Join Date: Apr 2008 Location: Australia Device: iLiad V2	Thanks, Alex and teemac smd79 has a V3+ ECO Reader, so the firmware is a different version to yours, but thank you both very much for responding. We're in touch by email, sorting this out.

08-02-2010, 08:07 PM	#6
cbell Frenetic Posts: 590 Karma: 8181 Join Date: Apr 2008 Location: Australia Device: iLiad V2	Alex, teemac is correct - there's a later version than you're running. Latest firmware: ECO Reader (V3, 4 greyscale) <V3update-AU-2.20-20100311.zip> (11/03/2010) ECO Reader (V3+, 16 greyscale) <v3asetup.2.02AU.100722.TTS.zip> (22/07/2010) ECO Eclipse <v5setup.2.02AU.100524.zip> (24/05/2010)

08-03-2010, 11:00 PM	#8
smd79 Junior Member Posts: 2 Karma: 10 Join Date: Jul 2010 Device: Eco Reader	Thanks for the replies, I resolved the issue by reformatting the readers drive. Mind you for some reason the reader will not function on some of my USB ports (even through the ports are in perfect working order). I've successfully uploaded my epubs to it.

08-04-2010, 03:42 AM	#9
cbell Frenetic Posts: 590 Karma: 8181 Join Date: Apr 2008 Location: Australia Device: iLiad V2	I'll let the ECO Reader helpdesk know their suggestion fixed your problem, smd79. Thanks for letting us know all's well now

09-26-2010, 08:30 AM	#10
teemac Member Posts: 21 Karma: 140 Join Date: Jan 2010 Location: NSW, Australia Device: ECO Reader V3ext, ECO Reader V3+	@cbell - Christine, I have just purchased a new ECO Reader V3+ to replace the old V3 I bought last year - also need the new V3+ firmware link. Have PM'd you. Thanks.

09-26-2010, 09:01 AM	#11
cbell Frenetic Posts: 590 Karma: 8181 Join Date: Apr 2008 Location: Australia Device: iLiad V2	I saw your order, teemac and I pm'd you last week. I don't see your pm, though... I will email you the link tomorrow (I have your email address). Thank you for your order!

12-01-2010, 06:12 AM	#13
iq6000 Enthusiast Posts: 29 Karma: 5000 Join Date: Nov 2010 Location: Deception Bay, QLD, Australia Device: ECO Reader, iPhone	Just wanted to say thanks everyone for your help. I bought my ECO Reader and realised it needed a firmware update. I was sent the link to the update and, well, I sort of followed the instructions - except that I only had a 2GB SD card and the instructions said use a 1GB or less card to install the update. Decided to give it a go - it wouldn't do any harm, right? Well I couldn't get it to start the upload process - just a blank screen. "Oh well", I thought "I am sure I have a smaller SD card somewhere in the house (it is in my daughter's camera - but who knows where the camera is?) - I will worry about it later. " My husband was trying to hurry me up so I would go to work with him (on MY day off work), so I packed the reader and left the house. When I got to his workshop I opened the reader - but the book I was reading wasn't there. No big deal - it is on the computer at home, I will just read something else. There were only a few books on the reader though, instead of about 100. "That's OK - I will fix it when I get home." Yeah - 6 hours later. I attempted the update again with the 2GB card. I wanted to make sure I had otherwise followed the instructions exactly. Success! Firmware updated! Despite the 2GB card. But the books! Somehow the reader's drive was reporting 56GB of files, which were corrupted and couldn't be opened, deleted or renamed. The files were dated from 1/1/1604 to May 2047. 56 gigabytes - pretty impressive for an ECO Reader!! I was impressed, anyway.... I tried a few things but no luck. I knew I could get rid of the corrupt files by formatting, but I have always seen that as a bit of a risky procedure - so easy to get wrong!! So I logged on to this forum, did a bit of searching and reading and found the confidence to go ahead with the format. It worked perfectly - I formatted the drive and was then able to copy all my books back. And because I was starting from scratch I could easily reorganise the whole file setup with new folders and sub folders and all the books are now in categories. I love categories! So now I have an up to date reader, all my books organised - now I just need to make time to read more!!! Thanks, Angela

Advert

Advert