Tolino Vision 6 Bootloop

[litrpguy]

I was using my Vision 6 casually when it suddenly restarted and got stuck in a bootloop. I can however access my files via TWRP but whenever i would boot into system, the screen gets stuck in a ellipses/boot loading screen. Any ideas how can this be resolved?

[Waldy]

Here's one option:
You may need to install the driver in Device Manager first.
Find out what firmware to restore on the device.
Flash the appropriate STOCK-RECOVERY and do a reset.
https://mega.nz/file/uxdDUBbY#toGh1A...vIYsxWIy2qe8xk
https://mega.nz/file/vlkhxKhC#kG5omF...AqU6xWRAMJHRU4

[litrpguy]

Originally Posted by Waldy

Here's one option:
You may need to install the driver in Device Manager first.
Find out what firmware to restore on the device.
Flash the appropriate STOCK-RECOVERY and do a reset.
https://mega.nz/file/uxdDUBbY#toGh1A...vIYsxWIy2qe8xk
https://mega.nz/file/vlkhxKhC#kG5omF...AqU6xWRAMJHRU4

Thanks Waldy, trying this as I just came from vacation, I can't seem to get a grip on fastboot devices even when the driver is already installed but will try it a few more times, the list of attached devices always came empty for even despite seeing adb android interface in device manager

[Waldy]

Then install TV6_recovery_tolino_16.2.0.img.
If during recovery it gives an error like in the video, then you need TV6_recovery_E70P14_15.2.6.img.
Now only tomorrow I will write what needs to be done in this case.
https://mega.nz/file/uoN0TIQZ#oBn7cU...48vqTOtbgUc1tY
And just in case, I’ll write, do not install TWRP before updating the firmware. The Stock-Recovery must be installed.

[litrpguy]

Originally Posted by Waldy

Then install TV6_recovery_tolino_16.2.0.img.
If during recovery it gives an error like in the video, then you need TV6_recovery_E70P14_15.2.6.img.
Now only tomorrow I will write what needs to be done in this case.
https://mega.nz/file/uoN0TIQZ#oBn7cU...48vqTOtbgUc1tY
And just in case, I’ll write, do not install TWRP before updating the firmware. The Stock-Recovery must be installed.

Thanks Waldy, my device probably has some serious issues as i can't copy from and to the device but I'll keep trying all of your suggested solutions

[rantanplan]

Originally Posted by litrpguy

Thanks Waldy, my device probably has some serious issues as i can't copy from and to the device but I'll keep trying all of your suggested solutions

That sounds suspiciously like a defective sdcard.

[Waldy]

Originally Posted by litrpguy

Thanks Waldy, my device probably has some serious issues as i can't copy from and to the device but I'll keep trying all of your suggested solutions

And you also cannot boot the device into recovery mode using hardware buttons?

You can flash it in another way.
https://mega.nz/file/fwchAQKR#AZ6mAx...mHBZ_P6U8na5Ow
We connect Tolino to the PC.
Turn off Tolino by holding the power-button for 10 - 15 seconds.
Click 2_FLASH_TV6_recovery_tolino_16.2.0.bat.
Now use the buttons (bottom page turn button + power-button) to boot into fastboot until the command is executed.
Next, disconnect the Tolino from the PC and, using a long press on the bottom page turn button + power-button reboot from the mode
fastboot to recovery mode.

[litrpguy]

Originally Posted by Waldy

And you also cannot boot the device into recovery mode using hardware buttons?

You can flash it in another way.
https://mega.nz/file/fwchAQKR#AZ6mAx...mHBZ_P6U8na5Ow
We connect Tolino to the PC.
Turn off Tolino by holding the power-button for 10 - 15 seconds.
Click 2_FLASH_TV6_recovery_tolino_16.2.0.bat.
Now use the buttons (bottom page turn button + power-button) to boot into fastboot until the command is executed.
Next, disconnect the Tolino from the PC and, using a long press on the bottom page turn button + power-button reboot from the mode
fastboot to recovery mode.

I'm currently able to flash it via 2_FLASH_TV6_recovery_tolino_16.2.0.bat, able to boot into recovery mode now. Thanks for this help! Will retry your prior suggestions

[litrpguy]

Reboot > Recovery > Do not Install button after flashing does display twrp briefly returns me into ... unlike in the vid your provided. I slightly agreeing with @rantanplan that the sdcard might have gone defective in a sense

[Waldy]

Originally Posted by litrpguy

Reboot > Recovery > Do not Install button after flashing does display twrp briefly returns me into ... unlike in the vid your provided. I slightly agreeing with @rantanplan that the sdcard might have gone defective in a sense

Have you solved your problem?
It is quite possible that the SD card is to blame, if necessary I will share the image.
Although it seems to me that this is not your case and I would still try to restore it.
Sent you a PM.

[litrpguy]

Originally Posted by Waldy

Have you solved your problem?
It is quite possible that the SD card is to blame, if necessary I will share the image.
Although it seems to me that this is not your case and I would still try to restore it.
Sent you a PM.

No I haven't, i sent a reply. Thanks for bothering. I saw your reply.

[litrpguy]

Solved and thanking @Waldy for all the help, I was able to replace the sd card on my own with your videos and guide. The copy of files did seem to get better using the u3 type cards.

[ottobott1]

I have a similar problem with Tolino Vision 6
Could you please PM me the image SD card?
Thanks a lot.

[ottobott1]

Thanks a lot. I took your 64 GB image, installed it on the SD card and the reader came to life.

Now what to do next, how to get maximum opportunities for Tolino Vision 6?
Should I update to the latest version or Root first?
Or can I install third-party programs without Root?

[Redshirt256]

Originally Posted by Waldy

Have you solved your problem?
It is quite possible that the SD card is to blame, if necessary I will share the image.
Although it seems to me that this is not your case and I would still try to restore it.
Sent you a PM.

Would you be able to share them with me also, my tolino got stuck on "rebooting the system" screen and I wanted to give this a shot