C65ML BootLoop looking for recovery mode

[murciano2]

Hello,
my C65ML (Tagus Lux 2014) entered in BootLoop,
can someone tell me how enter in recovery mode?, I tried all possible key combinaisons without success.

Another possibility: because the ereader don't works in an autonomous way, is there any kind of external software I acn use to wake up the ereader: Flashtool or similar?

Thanks

[ziamrziamr]

yeah ...
I have same problem .
I need to go to recovery for update C65 ml .
When copy update.Zip copy to SD card error is appear , package is not valid .
if I can go to recovery or flash custom recovery , it will solve.

[Anavim]

I know how to switch the "loader mode":
- Press and hold the "back"
- And while holding the button, connect the USB cable from your computer

Then you can use the tool to flash, for example:
http://www.freak-tab.de/finless/rk_tool21_how_to.zip

[ziamrziamr]

NOT WORK

I do It but the error is appear " device is not found"

[bko]

Hello,

I have an Onyx Boox C65 After Glow (ArtaTech, Amazon) and wanted the "original" - Onyx Software Int flash because it also has Google Play so doing.
Have both RK Android Flash Tools v1.35 and v1.37 used. Flashing process completes without any error message, drivers were installed automatically (The device is reported on Win7 than -USB mass storage device and 2x as Onyx Int iBoox USB device, the Explorer will be two empty removable storage devices, Reader turns on after a minute, ie, display lighting going on - and that's that!
The message: "AG is your BOOX off" allas is what you can read. No boot, nothing ...

I have several times the whole procedure (delete the NAND (Idb), bottles of - kernel.img, boot.img, misc.img, backup.img, recovery.img and system.mg) with ROOMs of Onyx Int. and ArtaTech (alternately) performed, but only the light goes on and it does not boot.

Curios there is also this: I've done the same thing about 3 months ago. Back then everything went back wonderful, from Arta to Onyx Int and again. Without problems.

What have I done wrong now?

Am grateful for any help!



(Sorry for bad english. It is a Google translation.)

[Anavim]

Onyx C65ML has two types: the 5 and 8 LEDs.
We must be careful that the software fits.
For versions with 5 LEDs (from ArtaTech), operating software version 1.5 (August this year) is available on the forum (in polish - google translate can help):
http://forum.eksiazki.org/onyx-boox-...ml-t14722.html
There is also a detailed procedure for flashing - find out what could be wrong.

[bko]

Originally Posted by Anavim

Onyx C65ML has two types: the 5 and 8 LEDs.
We must be careful that the software fits.
For versions with 5 LEDs (from ArtaTech), operating software version 1.5 (August this year) is available on the forum (in polish - google translate can help):
http://forum.eksiazki.org/onyx-boox-...ml-t14722.html
There is also a detailed procedure for flashing - find out what could be wrong.

Thank you @Anavim for this link.
But, it does not work whit this software too. It is exactly the same what I am done before.
So I think, its definitive dead & gone...