PRS-505 Does a PRS-500 cover fit a PRS-505?

Studio717 · 08-07-2008, 03:43 PM

The title says it all. I'm going to be doing the trade-in thing, but I have one of the green leather covers for my PRS-500 and like it a lot. The current online store doesn't list a cover in green and I'd like to use the one I have. Is that possible?

(I'm guessing the answer is 'no' but I'm hoping i'm wrong.)

MarciaCat · 08-07-2008, 04:06 PM

You are correct the answer is no. The 505 hooks from the top and bottom at the left side whereas the 500 snaps in on the back. Sorry!

Studio717 · 08-07-2008, 04:33 PM

Thanks, MarciaCat.

After some more looking around, I think I'll be getting that cover/wedgelight combo anyway. Only problem is that the green cover was a lot easier to find than the black will be!

numindast · 08-07-2008, 09:07 PM

Thanks for this post. I'm gonna do the upgrade too, and wondered if I could reuse my PRS-500 leather cover.

One thing that stinks is apparently the cradle (BCR-RU1) for the 500 is not compatible with the 505 ... and not only that, there is no equivalent replacement. Boo!

HarryT · 08-08-2008, 07:06 AM

I suspect that almost nobody bought the 500's cradle. What do you use it for, if I might ask?

AprilHare · 08-10-2008, 05:43 AM

I doubted I could get an AC adaptor for the cradle in Australia - what DC voltage and max current requirements did it require anyway?

HarryT · 08-10-2008, 07:33 AM

AFAIK, you plug the standard Sony mains adaptor into the cradle (ie any PSP charger will works fine) and then the Sony just sits in (and recharges from) the cradle.

DrMoze · 08-10-2008, 03:16 PM

Quote:

Originally Posted by HarryT

AFAIK, you plug the standard Sony mains adaptor into the cradle (ie any PSP charger will works fine) and then the Sony just sits in (and recharges from) the cradle.

I could never figure out the point of the cradle,much less why anyone would spend money on one. What is so difficult about simply plugging the charger into the Reader itself?

BossHogg · 08-18-2008, 03:45 PM

Quote:

Originally Posted by DrMoze

I could never figure out the point of the cradle,much less why anyone would spend money on one. What is so difficult about simply plugging the charger into the Reader itself?

The point is that you set it up with power and USB connections and you have an all-in-one dock. I have one but only use it for charging. It's a bit tricky getting the connector to line up. I had to write "front" on it with a sharpie so I could remember how to load it. But it does have the advantage of a light that turns on when you insert the unit and goes off when charging is complete.

Dan <><

Siavahda · 02-01-2011, 06:48 PM

I know the 500 covers can't be used for the 505 readers, but could it work the other way around? I still have the (ancient!) PRS-500 and need to replace the cover, but I can't find a cover for the 500 anywhere.

I was wondering if it would be possible to use a 505 cover instead? Even though the 505 covers don't clip into place...

ritoroy · 02-04-2011, 07:42 AM

Quote:

Originally Posted by Siavahda

I know the 500 covers can't be used for the 505 readers, but could it work the other way around? I still have the (ancient!) PRS-500 and need to replace the cover, but I can't find a cover for the 500 anywhere.

I was wondering if it would be possible to use a 505 cover instead? Even though the 505 covers don't clip into place...

Siavahda, I traded in my PRS-500 late last year, but still have two of the covers: the original black Sony cover in mint unused condition (I rate it as one of the best covers Sony ever included with a Reader) as well as an OEM red leather cover that I used and loved. I shall be happy to send both of them to you if you cover the shipping cost.

Siavahda · 02-11-2011, 01:51 PM

Oh, that would be wonderful! Thank you so much, I'd given up any hope of getting hold of a cover!

I can easily do that; is paypal alright to pay with?

ritoroy · 02-18-2011, 06:47 AM

Quote:

Originally Posted by Siavahda

Oh, that would be wonderful! Thank you so much, I'd given up any hope of getting hold of a cover!

I can easily do that; is paypal alright to pay with?

Sure, I have sent you a Personal Message (PM).
PS: You can see a picture of the covers at https://www.mobileread.com/forums/sho...d.php?t=103922.

affa44 · 03-24-2011, 01:33 AM

Hi Siavahda,
If you don't have use for both covers, would you be prepared to forward one to Australia.
Of course, I'll pay the postage.
Regards

ritoroy · 03-24-2011, 09:01 PM

Quote:

Originally Posted by affa44

Hi Siavahda,
If you don't have use for both covers, would you be prepared to forward one to Australia.
Of course, I'll pay the postage.
Regards

Actually Siavahda bought a Kindle instead, so both PRS-500 covers are still with me! Available first-come-first-served free for the US, and for the cost of shipping abroad. Please PM me if you are interested.

08-07-2008, 03:43 PM	#1
Studio717 Addict Posts: 208 Karma: 575 Join Date: Oct 2006 Location: California Device: Various Kindles, iPhone, iPad, Galaxy 10.1	Does a PRS-500 cover fit a PRS-505? The title says it all. I'm going to be doing the trade-in thing, but I have one of the green leather covers for my PRS-500 and like it a lot. The current online store doesn't list a cover in green and I'd like to use the one I have. Is that possible? (I'm guessing the answer is 'no' but I'm hoping i'm wrong.)

02-01-2011, 06:48 PM	#10
Siavahda Zealot Posts: 107 Karma: 9400 Join Date: Aug 2010 Location: Helsinki Device: Kindle Paperwhite 2018	PRS-505 compatible with 500? I know the 500 covers can't be used for the 505 readers, but could it work the other way around? I still have the (ancient!) PRS-500 and need to replace the cover, but I can't find a cover for the 500 anywhere. I was wondering if it would be possible to use a 505 cover instead? Even though the 505 covers don't clip into place...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-350 Case to fit over PRS-350 with lighted cover	gattino	Sony Reader	5	03-07-2011 09:52 PM
Port Search Function from PRS 700 to PRS 505 500	jessie102	Sony Reader Dev Corner	7	01-25-2010 12:11 PM
Buy Sony PRS-500/PRS-505/PRS-600	doctoroop	Flea Market	0	01-05-2010 07:51 AM
Does the light cover for the PRS-600 fit the PRS-505?	Ler0y Jenkins	Sony Reader	3	11-10-2009 05:24 PM
PRS-700 and PRS-505 Review and Comparison from a PRS-500 owner	geekmeetsworld	Sony Reader	5	03-01-2009 04:34 PM

08-07-2008, 04:06 PM	#2
MarciaCat Cat Lady & Trekkie Posts: 421 Karma: 221630 Join Date: Jul 2007 Location: San Diego, CA Device: Kobo Libra, Kobo Aura & Aura H20	You are correct the answer is no. The 505 hooks from the top and bottom at the left side whereas the 500 snaps in on the back. Sorry!

08-07-2008, 04:33 PM	#3
Studio717 Addict Posts: 208 Karma: 575 Join Date: Oct 2006 Location: California Device: Various Kindles, iPhone, iPad, Galaxy 10.1	Thanks, MarciaCat. After some more looking around, I think I'll be getting that cover/wedgelight combo anyway. Only problem is that the green cover was a lot easier to find than the black will be!

08-07-2008, 09:07 PM	#4
numindast Enthusiast Posts: 34 Karma: 296 Join Date: Sep 2007 Location: Chicago Device: K2, DX (had PRS500, 505, 700)	Thanks for this post. I'm gonna do the upgrade too, and wondered if I could reuse my PRS-500 leather cover. One thing that stinks is apparently the cradle (BCR-RU1) for the 500 is not compatible with the 505 ... and not only that, there is no equivalent replacement. Boo!

08-08-2008, 07:06 AM	#5
HarryT eBook Enthusiast Posts: 85,544 Karma: 93383043 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	I suspect that almost nobody bought the 500's cradle. What do you use it for, if I might ask?

08-10-2008, 05:43 AM	#6
AprilHare Wizard Posts: 2,981 Karma: 11862367 Join Date: Apr 2008 Device: Sony Reader PRS-T2	I doubted I could get an AC adaptor for the cradle in Australia - what DC voltage and max current requirements did it require anyway?

08-10-2008, 07:33 AM	#7
HarryT eBook Enthusiast Posts: 85,544 Karma: 93383043 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	AFAIK, you plug the standard Sony mains adaptor into the cradle (ie any PSP charger will works fine) and then the Sony just sits in (and recharges from) the cradle.

02-11-2011, 01:51 PM	#12
Siavahda Zealot Posts: 107 Karma: 9400 Join Date: Aug 2010 Location: Helsinki Device: Kindle Paperwhite 2018	Oh, that would be wonderful! Thank you so much, I'd given up any hope of getting hold of a cover! I can easily do that; is paypal alright to pay with?

03-24-2011, 01:33 AM	#14
affa44 Member Posts: 11 Karma: 592 Join Date: Jan 2011 Location: Tongala, Victoria, Australia Device: Sony PRS-500	Hi Siavahda, If you don't have use for both covers, would you be prepared to forward one to Australia. Of course, I'll pay the postage. Regards

Advert

Advert