Welcome to the new Dedicated Astak Forum

Robertb · 08-20-2009, 01:55 PM

Dear All:

The intent of this dedicated Astak forum is to make it easier for people who are new or do not post regularly or are old timers to the old Astak thread to be able to find out about Astak products and services and features and releases and firmware upgrades and much more!

It is a chance, also, to let others that may wander around MobileRead Forum, to park here for a while and learn.

Astak makes the EZ Reader line of eBook Readers. We ARE the manufacturer! Here you can ask questions and get answers.

griffonwing · 08-20-2009, 02:59 PM

Wooooooooooooooooooo!!!

ekaser · 08-20-2009, 07:43 PM

Since this thread is sticky, here's a bunch of info about the EZ Readers:

Astak currently offers a 6" (diagonal) eInk device (the EZ Reader) and a 5" (diagonal) device (the Pocket Pro EZ Reader, or PEZ for short). You can read all about them on this web site: http://www.theEZreader.com

People in the U.S. and Canada can order from the above website. People from other countries should go to http://www.astak.com to order (don't ask why, that's just the way it is).

Check further down in this thread for updated information, as things will certainly change (new models, web sites, etc) as time passes.

The EZ Reader ships with:
1) The EZ Reader device itself with a User-replaceable Li-polymer battery.
2) A protective carrying case.
3) A wrist strap (leash).
4) Ear buds (head phones).
5) AC adapter (U.S. only plug, but switches between 110V and 220V.).
6) USB cable.
7) (Not advertised, but included) a low-cost miniature Phillips screwdriver for removing the battery door, in case you don't have one.

The readers have 512 Mbytes of internal flash. The 6" device (older technology) supports an external SD memory card up to 4 GBytes, while the 5" device (newer technology) supports an external SD memory card up to 16 GBytes. The 6" device actually MAY work with up to 16 GByte SD cards, and the 5" device MAY work with up to 32 GByte SD cards, but it's not guaranteed (will vary with the card brand) and MAY slow down the performance of the EZ Reader, so they're not officially supported.

The Li-polymer batteries are for both devices are different, but are both standard cell phone batteries that are available on the internet for around $8 to $10 dollars. You may never need to replace it, but if you do, it won't cost much and won't require that your device makes a trip to the factory, since the battery is user-replaceable. The battery in the 5" EZ Reader Pocket PRO is a 1000mAh LG battery. The battery in the 6" EZ Reader is a 950mAh Nokia battery.

Both EZ Readers can display/play these file formats (some are handled better than others, of course): ADE (Adobe Digital Editions), BMP, CHM, DJVU, DOC, EPUB, FB2, GIF, HTML, JPG, LIT, MP3, PDB, PDF, PNG, PPT, PRC, RAR, TIF, TXT, WOL, ZIP.

The Pocket Pro includes Text-To-Speech (TTS) which can read ebooks to you in a "female computer voice" (non-inflected). It handles MOST of the text formats, but will NOT work (yet) with ePub or PDF.

sakusom · 08-27-2009, 09:13 AM

I have used my CyBook Gen 3 couple months and I am going to by a bigger one with wlan as soon as possible.
I have of course used the case protecting the reader. I am wondering why the side of the case could be covered with photovoltaic material? Especially those wlan devices does not to be all the time connected to the computer?

Is the Astak Mentor 9.7 my selection or am I waiting for Plastic Logic? Or what?

Robertb · 08-27-2009, 03:34 PM

Quote:

Originally Posted by sakusom

I have used my CyBook Gen 3 couple months and I am going to by a bigger one with wlan as soon as possible.
I have of course used the case protecting the reader. I am wondering why the side of the case could be covered with photovoltaic material? Especially those wlan devices does not to be all the time connected to the computer?

Is the Astak Mentor 9.7 my selection or am I waiting for Plastic Logic? Or what?

Dear Sakusom:

All 9.7 inch devices are waiting anxiously for late September. That is when PVI will start production of the Flexi Screens. We do not have official word of release date yet... but expect a 9.7 inch "EZ Reader TRUE" in late October or November 2009

808Tom · 09-24-2009, 03:48 PM

Quote:

Originally Posted by Robertb

Dear All:

The intent of this dedicated Astak forum is to make it easier for people who are new or do not post regularly or are old timers to the old Astak thread to be able to find out about Astak products and services and features and releases and firmware upgrades and much more!

It is a chance, also, to let others that may wander around MobileRead Forum, to park here for a while and learn.

Astak makes the EZ Reader line of eBook Readers. We ARE the manufacturer! We are the only Manufacturer with a significant presence on MR. Here you can ask questions and get answers.

----------
How can I or where do I look to identify a single Astak MobileRead resource to establish my own subscription and then to look at as a form of "on-going monitoring" and then what do I do to "sign-up" and thus have -- for me -- a single place and link to read and look at regularly? Suggestions please. 808Tom

John F · 09-24-2009, 03:57 PM

Quote:

Originally Posted by 808Tom

----------
How can I or where do I look to identify a single Astak MobileRead resource to establish my own subscription and then to look at as a form of "on-going monitoring" and then what do I do to "sign-up" and thus have -- for me -- a single place and link to read and look at regularly? Suggestions please. 808Tom

How about "Forum Tools->Subscribe to Forum"

808Tom · 09-24-2009, 04:15 PM

I admit ... I cannot find or make the suggested link ... How do I find & implement what you've suggested? 808Tom

John F · 09-24-2009, 05:16 PM

1) Go to the astak forum: MobileRead Forums > E-Book Devices > Astak EZReader

2) towards the top of the forum click on "Forum Tools". A pop up menu appears

3) Click on "Subscribe to forum"

You will get email whenever something happens in the forum. To get instant emails, edit your profile.

Disclaimer: I've never used the feature, I'm just guessing how it works.

Good luck.

P.S. In case you haven't heard yet, the Pocket Pro has a 400Mhz processor and the new Epson controller that makes the reader super fast!

cardjj · 09-24-2009, 06:53 PM

my dad got the 6 inch astak reader and downloaded the newest firmware and unzipped it and put on the sd card that came with it and flashed the reader and now it will not do a thing, we charged for 24 hours and still will not do a thing and all so pressed the reset button the back.
we sent it back, but I read some were you cannot make brick out the reader.
Just flash it again with the old firmware and it should be ok.
has some one had the same problem? and can you make a brick out of your reader?
has some tryied to flash it with bebooks firmware and or tried openinkpot as well.

pilotbob · 09-24-2009, 07:15 PM

You can use this link to see if there are any new Messages in the Astak section:

https://www.mobileread.com/forums/sea...ew&include=204

It is not really a subscription.

You can subscribe to any specific threads you want to follow and get email notifications if you want.

BOb

808Tom · 09-24-2009, 07:15 PM

"1) Go to the astak forum: MobileRead Forums > E-Book Devices > Astak EZReader

2) towards the top of the forum click on "Forum Tools". A pop up menu appears ...."

Thanks for the specific insights & help ... I'm now a subscriber. 808Tom

pilotbob · 09-24-2009, 07:23 PM

Quote:

Originally Posted by 808Tom

I admit ... I cannot find or make the suggested link ... How do I find & implement what you've suggested? 808Tom

Here is a screen snap of the forum tools menu. I forgot about the forum subscription.

BOb

drbootsie · 10-14-2009, 08:16 PM

I got my EZ Reader Pocket Pro last month, and it does everything I hoped it would do. Now I'm fiddling with all the things it does that I never thought about...should keep me busy for a while!

I just wanted to thank everybody in this forum for all the great information that helped me decide whether to buy a reader device, and which one would fit my needs. Thanks, RobertB, for answering all my questions about the Pocket Pro (without my having to ask them, no less!) and thanks to all the helpful, knowledgeable people and their civil, fun discussions.

I'll resume lurking and learning now. Thanks again!

snowgoose · 10-31-2009, 09:49 PM

Its about November already. Plastic Logic announced last month that their Que e-reader will be available some time about Jan/Feb 2010. Netronix appeared to be aiming for about the same timescale with their 9.7" reader.

We have heard little for two months about Astak's Mentor reader 9.7" readers, and the last said was that all were waiting for the screens to be made in Mid-September. Well, it is November now, so have the larger screens yet even been delivered to the e-reader manufacturers? I did hope that Astak would beat Plastic Logic to market by a week or two, if they hoped to grab some market share. Is there any news you can give us...any hope at all.

Patient senior, with a long list of pdf documents !

08-20-2009, 01:55 PM	#1
Robertb Astak Director, Bus. Devl Posts: 2,560 Karma: 2500000 Join Date: Apr 2008 Device: Astak Pocket PRO	Welcome to the new Dedicated Astak Forum Dear All: The intent of this dedicated Astak forum is to make it easier for people who are new or do not post regularly or are old timers to the old Astak thread to be able to find out about Astak products and services and features and releases and firmware upgrades and much more! It is a chance, also, to let others that may wander around MobileRead Forum, to park here for a while and learn. Astak makes the EZ Reader line of eBook Readers. We ARE the manufacturer! Here you can ask questions and get answers. Last edited by Alexander Turcic; 01-20-2010 at 09:24 AM.

08-20-2009, 07:43 PM	#3
ekaser Opinion Artiste Posts: 301 Karma: 61464 Join Date: Mar 2009 Location: Albany, OR Device: Nexus 5, Nexus 7, Kindle Touch, Kindle Fire	Since this thread is sticky, here's a bunch of info about the EZ Readers: Astak currently offers a 6" (diagonal) eInk device (the EZ Reader) and a 5" (diagonal) device (the Pocket Pro EZ Reader, or PEZ for short). You can read all about them on this web site: http://www.theEZreader.com People in the U.S. and Canada can order from the above website. People from other countries should go to http://www.astak.com to order (don't ask why, that's just the way it is). Check further down in this thread for updated information, as things will certainly change (new models, web sites, etc) as time passes. The EZ Reader ships with: 1) The EZ Reader device itself with a User-replaceable Li-polymer battery. 2) A protective carrying case. 3) A wrist strap (leash). 4) Ear buds (head phones). 5) AC adapter (U.S. only plug, but switches between 110V and 220V.). 6) USB cable. 7) (Not advertised, but included) a low-cost miniature Phillips screwdriver for removing the battery door, in case you don't have one. The readers have 512 Mbytes of internal flash. The 6" device (older technology) supports an external SD memory card up to 4 GBytes, while the 5" device (newer technology) supports an external SD memory card up to 16 GBytes. The 6" device actually MAY work with up to 16 GByte SD cards, and the 5" device MAY work with up to 32 GByte SD cards, but it's not guaranteed (will vary with the card brand) and MAY slow down the performance of the EZ Reader, so they're not officially supported. The Li-polymer batteries are for both devices are different, but are both standard cell phone batteries that are available on the internet for around $8 to $10 dollars. You may never need to replace it, but if you do, it won't cost much and won't require that your device makes a trip to the factory, since the battery is user-replaceable. The battery in the 5" EZ Reader Pocket PRO is a 1000mAh LG battery. The battery in the 6" EZ Reader is a 950mAh Nokia battery. Both EZ Readers can display/play these file formats (some are handled better than others, of course): ADE (Adobe Digital Editions), BMP, CHM, DJVU, DOC, EPUB, FB2, GIF, HTML, JPG, LIT, MP3, PDB, PDF, PNG, PPT, PRC, RAR, TIF, TXT, WOL, ZIP. The Pocket Pro includes Text-To-Speech (TTS) which can read ebooks to you in a "female computer voice" (non-inflected). It handles MOST of the text formats, but will NOT work (yet) with ePub or PDF. Last edited by ekaser; 09-03-2009 at 02:02 PM.

08-27-2009, 09:13 AM	#4
sakusom Junior Member Posts: 1 Karma: 10 Join Date: Jul 2009 Device: Cybook Gen3	Astak Mentor or Plastic Logic? I have used my CyBook Gen 3 couple months and I am going to by a bigger one with wlan as soon as possible. I have of course used the case protecting the reader. I am wondering why the side of the case could be covered with photovoltaic material? Especially those wlan devices does not to be all the time connected to the computer? Is the Astak Mentor 9.7 my selection or am I waiting for Plastic Logic? Or what?

10-14-2009, 08:16 PM	#14
drbootsie Junior Member Posts: 2 Karma: 10 Join Date: May 2009 Location: Pocahontas County, West Virginia USA Device: Astak EZ Reader Pocket Pro	Thank you! I got my EZ Reader Pocket Pro last month, and it does everything I hoped it would do. Now I'm fiddling with all the things it does that I never thought about...should keep me busy for a while! I just wanted to thank everybody in this forum for all the great information that helped me decide whether to buy a reader device, and which one would fit my needs. Thanks, RobertB, for answering all my questions about the Pocket Pro (without my having to ask them, no less!) and thanks to all the helpful, knowledgeable people and their civil, fun discussions. I'll resume lurking and learning now. Thanks again!

10-31-2009, 09:49 PM	#15
snowgoose Member Posts: 11 Karma: 16 Join Date: Jan 2009 Device: None Yet	Larger Screen Astak Ereaders Its about November already. Plastic Logic announced last month that their Que e-reader will be available some time about Jan/Feb 2010. Netronix appeared to be aiming for about the same timescale with their 9.7" reader. We have heard little for two months about Astak's Mentor reader 9.7" readers, and the last said was that all were waiting for the screens to be made in Mid-September. Well, it is November now, so have the larger screens yet even been delivered to the e-reader manufacturers? I did hope that Astak would beat Plastic Logic to market by a week or two, if they hoped to grab some market share. Is there any news you can give us...any hope at all. Patient senior, with a long list of pdf documents !

08-20-2009, 02:59 PM	#2
griffonwing Suave Swabby, Savvy? Posts: 1,602 Karma: 520350 Join Date: Jun 2008 Location: Harrison, ARrrr, USA - southern Ozark mountains Device: Slate Blue PEZ (Astak Pocket Pro), CVSCX-9300 Quad-band watch phone	Wooooooooooooooooooo!!!

09-24-2009, 04:15 PM	#8
808Tom 808Tom Posts: 6 Karma: 10 Join Date: Aug 2009 Location: Hawai'i Device: Astak	I admit ... I cannot find or make the suggested link ... How do I find & implement what you've suggested? 808Tom

09-24-2009, 05:16 PM	#9
John F Grand Sorcerer Posts: 7,548 Karma: 67891011 Join Date: Feb 2009 Device: Kobo Clara 2E	1) Go to the astak forum: MobileRead Forums > E-Book Devices > Astak EZReader 2) towards the top of the forum click on "Forum Tools". A pop up menu appears 3) Click on "Subscribe to forum" You will get email whenever something happens in the forum. To get instant emails, edit your profile. Disclaimer: I've never used the feature, I'm just guessing how it works. Good luck. P.S. In case you haven't heard yet, the Pocket Pro has a 400Mhz processor and the new Epson controller that makes the reader super fast!

09-24-2009, 06:53 PM	#10
cardjj Junior Member Posts: 2 Karma: 10 Join Date: Sep 2009 Device: none	my dad got the 6 inch astak reader and downloaded the newest firmware and unzipped it and put on the sd card that came with it and flashed the reader and now it will not do a thing, we charged for 24 hours and still will not do a thing and all so pressed the reset button the back. we sent it back, but I read some were you cannot make brick out the reader. Just flash it again with the old firmware and it should be ok. has some one had the same problem? and can you make a brick out of your reader? has some tryied to flash it with bebooks firmware and or tried openinkpot as well.

09-24-2009, 07:15 PM	#11
pilotbob Grand Sorcerer Posts: 19,832 Karma: 11844413 Join Date: Jan 2007 Location: Tampa, FL USA Device: Kindle Touch	You can use this link to see if there are any new Messages in the Astak section: https://www.mobileread.com/forums/sea...ew&include=204 It is not really a subscription. You can subscribe to any specific threads you want to follow and get email notifications if you want. BOb

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BeBook dedicated device forum	orwell2k	Feedback	22	02-02-2010 12:59 PM
Dedicated OEM forum?	AlfonsVH	Feedback	2	08-20-2009 10:48 AM
Forum additions: Astak + Jetbook next!	Alexander Turcic	Announcements	14	08-16-2009 12:29 AM
Sigil moves in to a dedicated forum on MobileRead !	zelda_pinwheel	News	8	08-06-2009 09:10 AM
Dedicated Cybook forum Opened at MobileRead!	NatCh	Announcements	14	07-07-2007 01:47 PM

Advert

Advert