![]() |
#1 |
Junior Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 1
Karma: 82280
Join Date: Jul 2022
Device: PB741
|
[GUIDE] Fix touchpad after firmware update
I am using a PocketBook InkPad Color (PB741), nevertheless, the following procedure should also apply to InkPad 3 (PB740) and possibily other devices.
It actually took me a whole night to figure out what was going wrong. Hope this could help guys having the same issue. ------------------- How to reproduce the problem: Do an OTA or manual firmware update on a jailbroken PB740/PB741. The update will fail, after reboot, the touchscreen no longer works. ------------------- Some obervations: The issue arose today after performing an OTA update. From PB's official site, I found 3 firmwares, respectively 6.5.2918, 6.5.1684 and 6.3.560. 6.5.2918, the latest one, turns out to be the OTA update target that just killed my touchscreen. I then tried to manually downgrade to 6.5.1684, but it didn't help. I also tried to downgrade to 6.3.560, but it said this firmware was too old and rejected flashing. After a bit of googling, I found another firmware 6.3.917, which fixed the touchscreen after flashing. ------------------- Cause of the problem: After unpacking the update binaries of firmware 6.3.917 and 6.5.2918, I went through the update scripts related to touchpad firmware. It turns out that on ver. 6.5.2918, there are two sets of touchpad firmwares for two different manufacturers, the updater will flash the correct firmware according to the value of device_touchpanel in the output of /bin/hwconfig. On the other hand, 6.3.917 only supports touchpads from one of the two manufacturers (we can speculate that PocketBook introduced a new brand of touchpad controller at some time in between these two firmware's anouncement). On jailbroken devices, since the partition fingerprints changed, some update scripts will not get executed and the updater will return a update failure (though the whole flashing process actually suceeds, only some post-processing scripts return an error). One skipped update script that only presents in firmware 6.5.* tries to create a symlink for the touchpad kernel module according to the actual model. When the reader starts up, it will tries to load the touchpad module by this symlink. In a jailbroken device, the symlink does not exist thus the module does not load, and the touchpad dies. ------------------- How to resolve the issue: In order to have the touchscreen work on a recent firmware 6.5.*, it suffices to create the .ko symlink manually. 1. (Skip this step if you already have USB networking and SSH server on) Downgrade to a old firmware version, e.g., 6.3.917, so that the touchscreen is working. Jailbreak and root the device, enable USB networking and SSH server. 2. Upgrade to the latest firmware. The touchscreen will break down but we still have a root shell (via SSH over USB or wireless network) 3. SSH to the reader. run /bin/hwconfig to see the value of device_touchpanel. (On my PB701 I have device_touchpanel=21). Run mount -o rw,remount /dev/root / to remount the root partition. Run cd /lib/modules If device_touchpanel=26, run ln -s ektf3908.ko tp.ko, otherwise, run ln -s cyttsp5.ko tp.ko Run reboot. Your reader will reboot, after it starts up again, the touchscreen should work. |
![]() |
![]() |
![]() |
#2 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 15
Karma: 1844
Join Date: May 2014
Device: Aura HD, Inkpad 3
|
This procedure worked like a charm on my rooted Inkpad 3 (PB740).
Latest firmware version with touchscreen working for Inkpad 3 is 6.5.1379. And the value of device_touchpanel is 21, too. Hugh thanks, fotile96. Last edited by hombretranquilo; 08-20-2022 at 08:35 AM. |
![]() |
![]() |
Advert | |
|
![]() |
#3 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 763
Karma: 625812
Join Date: Sep 2013
Device: EnergySistemEreaderPro, Nook STG, Pocketbook 622, Bookeen Cybooks ...
|
Very good advice, thanks. Could you please ad in the thread title "on rooted devices" for others to find it better.
|
![]() |
![]() |
![]() |
#4 |
Junior Member
![]() Posts: 1
Karma: 10
Join Date: Mar 2023
Device: Inkpad pro 3
|
Unfortunately I found this thread after I performed the update on my PB740-2...I can't figure out how to downgrade...found that I can try and install update again (power + left and right) but that fails the same way. I've tried connecting to a computer (and Android phone) but it seems like the device is waiting on approval to give control to another device.
Any ideas on how to downgrade or factory reset without being able to touch the screen? |
![]() |
![]() |
![]() |
#5 | |
Enthusiast
![]() Posts: 44
Karma: 10
Join Date: Feb 2009
Location: Ireland
Device: PRS-505, Inkpad3Pro
|
Quote:
download the firmware (from pocketbook.ch for example) unpack, connect the reader via usb, move the swupdate.bin to the root directory of the reader, turn it off, then on again and press the < and > button, then follow the dialog ![]() |
|
![]() |
![]() |
Advert | |
|
![]() |
#6 |
Member
![]() Posts: 12
Karma: 10
Join Date: Jan 2016
Device: kobo n647
|
Hello! Is there a way to get the sensor to work in a Pocketbook 628? The original has ED060XCG installed. I have ED060XH7 and ED060XCD, but the sensor does not work with them. I connected to the book via SSH (jailbreak and root obtained), and determined that device_touchpanel=23
Please tell me what needs to be done next in order for one of my screens to work correctly, if possible. |
![]() |
![]() |
![]() |
#7 |
Junior Member
![]() Posts: 1
Karma: 10
Join Date: Feb 2024
Device: PB741 PB626 PB633
|
Downgrade firmware
Hi, how can it possible downgrade firmware from 6.5.XXXX to 6.3.XXX on PB741?
|
![]() |
![]() |
![]() |
#8 | |
Member
![]() Posts: 13
Karma: 12
Join Date: Jun 2020
Device: pb740
|
Touchpad still not working on PB740
It seems I'm late to the party..
Quote:
Code:
Firmware update swupdate version: Dec 22 2021,11:49:33 Searching for update image... Updating from internal memory Device serial number: *redacted* Checking update image... Found FW for device model: PocketBook740 Update image: MD5 sum mismatch The device will turn off in few seconds Please, any help is highly appreciated!! Thanks! Last edited by nomoi; 05-20-2024 at 09:11 AM. |
|
![]() |
![]() |
![]() |
#9 | |
Member
![]() Posts: 13
Karma: 12
Join Date: Jun 2020
Device: pb740
|
Quote:
Code:
mount -o rw,remount /dev/root / cd /lib/modules grep -q 'device_touchpanel=26' && run ln -s ektf3908.ko tp.ko || ln -s cyttsp5.ko tp.ko reboot ![]() |
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Firmware Update Kindle Keyboard - not registering and no 3G, will a firmware fix it? | allanmartins | Amazon Kindle | 8 | 08-06-2014 09:27 AM |
Aura How to fix my Japanese firmware problem. | Canuck_in_Japan | Kobo Reader | 22 | 03-24-2014 05:46 PM |
Glo With the firmware fix, how do you like reading in the dark? | speedtouch | Kobo Reader | 17 | 12-15-2013 06:05 PM |
TouchPad get webOs update | jocampo | News | 1 | 10-18-2011 06:19 PM |
HP Touchpad Software Update | kjk | News | 1 | 08-05-2011 01:06 PM |