Link filtering

cstray · 02-23-2006, 11:15 PM

I've just switched to Plucker from Avantgo, and have been trying to set up some channels, and just found Sunrise! (mobileread is an awesome website, btw...can't believe I never stumbled on it before).

I've already gone through Plucker Desktop and tried my hand at sitescooper today, and have ended up on Sunrise XP. I'm trying to make a nicer Wired News channel by using the rss feed and then using the Link Filtering option to change the article links to the printer friendly ones. Is there a way to do this? I figured out the regexp to identify the article links, but it seems that the rewrite link has to be specific, and I don't know that since the article links will always change.

article links end in /0,#####-0.html?xxx...
printer links end in /1,#####-0.html (same # sequence)

Can you save that number sequence and stick it back in the rewrite link?

Hope this makes sense; I don't have much programming experience and am just figuring out this regexp thing on the fly.

EDIT: grr...such a noob...should have looked around more first. Just found this: link filtering. I think I should be able to figure it out from there...

cstray · 02-25-2006, 09:29 PM

I figured out how to get the Wired News printable versions, but have a question. In my browser (both Firefox and IE) there aren't any ads/other links between the header and the story. But in the plucked versions on my palm, there's about 2 pages worth...exactly what I was trying to avoid by going with the printable versions. Does anyone know how to get it like it looks online?

Laurens · 02-26-2006, 05:14 AM

Try enabling cookies to see if that helps.

cstray · 02-27-2006, 03:39 AM

Still getting the same thing with cookies enabled.

If the proper links show up in the 'update report' then those are the ones getting downloaded, right? Just want to make sure that I am actually pulling the pages I think I am.

I checked the source code for the printable pages, and oddly enough all of the extra stuff that I'm seeing on Plucker and not my computer browser is there, in the source code. So why doesn't it show up in my browser? I'm not http experienced enough to recognize what causes the difference...just wish I could make it disappear in Plucker so I don't have to scroll down so far to start the story!

Also, is Firefox cookie support going to be added? I hardly use IE anymore.

Laurens · 02-27-2006, 04:08 AM

Problem is that Wired has many different types subsites, including news, archive, blogs, and hotwired. These all need separate link rewriting filters. It also uses JavaScript (which Sunrise does not support) to hide advertisements on the printable pages.

Firefox cookies will not be supported.

cstray · 02-28-2006, 03:19 AM

got it. Guess I'll just have wade through the ads until they make a mobile-friendly page widely available again.

Laurens · 03-01-2006, 07:13 AM

You could try the Wired News in the Showcase or use the AvantGo workaround discovered by Alexander.

pablolic · 01-10-2008, 12:07 PM

I'm trying to replace AvantGo by using SunriseXP+Plucker on my Palm TX.

Can anyone upload or provide a link to a site of proven Sunrise Document configurations that emulate the content of AvantGo CHANNELS ?
(I don't want to link to http://rim.avantgo.com since there are many broken links)

I'm having trouble and loosing too much time trying to set the correct Link depth, link filters, image sizes, etc.

The channels that I use are:
Business Week Online Handheld Edition
Clarín.com
CNET News.com
InfoWorld
Reuters - UK Edition

Thanks a lot in advance,
Pablo

doogie68 · 01-19-2008, 05:40 PM

Pablo, unfortunately, you need to figure these things out, just like you would if you made a custom channel in AvantGo. Your personal tastes and resource needs are the ones that would dictate what these settings should be. I'd suggest you look at the wiki for sunrise, specifically the location linked below:

https://wiki.mobileread.com/wiki/Sunr...s_for_your_SXL

Good luck!

02-23-2006, 11:15 PM	#1
cstray Junior Member Posts: 6 Karma: 10 Join Date: Feb 2006 Device: Zodiac2	Link filtering I've just switched to Plucker from Avantgo, and have been trying to set up some channels, and just found Sunrise! (mobileread is an awesome website, btw...can't believe I never stumbled on it before). I've already gone through Plucker Desktop and tried my hand at sitescooper today, and have ended up on Sunrise XP. I'm trying to make a nicer Wired News channel by using the rss feed and then using the Link Filtering option to change the article links to the printer friendly ones. Is there a way to do this? I figured out the regexp to identify the article links, but it seems that the rewrite link has to be specific, and I don't know that since the article links will always change. article links end in /0,#####-0.html?xxx... printer links end in /1,#####-0.html (same # sequence) Can you save that number sequence and stick it back in the rewrite link? Hope this makes sense; I don't have much programming experience and am just figuring out this regexp thing on the fly. EDIT: grr...such a noob...should have looked around more first. Just found this: link filtering. I think I should be able to figure it out from there... Last edited by cstray; 02-23-2006 at 11:20 PM.

01-10-2008, 12:07 PM	#8
pablolic Junior Member Posts: 3 Karma: 10 Join Date: Jan 2008 Device: Palm TX	Where can I find Sunrise equivalents of Avantgo channels ? I'm trying to replace AvantGo by using SunriseXP+Plucker on my Palm TX. Can anyone upload or provide a link to a site of proven Sunrise Document configurations that emulate the content of AvantGo CHANNELS ? (I don't want to link to http://rim.avantgo.com since there are many broken links) I'm having trouble and loosing too much time trying to set the correct Link depth, link filters, image sizes, etc. The channels that I use are: Business Week Online Handheld Edition Clarín.com CNET News.com InfoWorld Reuters - UK Edition Thanks a lot in advance, Pablo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Possible calibre filtering?	Glenndk	Calibre	0	07-31-2010 02:34 PM
Firmware Update 2.3.3 download link?	kaiynne	Amazon Kindle	14	07-30-2010 12:33 PM
MPAA Wants Congress to ‘Encourage’ 3 Strikes, Filtering	Sonist	Lounge	17	11-08-2009 09:18 AM
New Features on Inkmesh: Result Filtering by Device & More Subjects	anurag	News	6	10-07-2009 11:55 PM
0.6.4 and filtering by tags	itimpi	Calibre	3	08-01-2009 02:43 PM

02-25-2006, 09:29 PM	#2
cstray Junior Member Posts: 6 Karma: 10 Join Date: Feb 2006 Device: Zodiac2	I figured out how to get the Wired News printable versions, but have a question. In my browser (both Firefox and IE) there aren't any ads/other links between the header and the story. But in the plucked versions on my palm, there's about 2 pages worth...exactly what I was trying to avoid by going with the printable versions. Does anyone know how to get it like it looks online?

02-26-2006, 05:14 AM	#3
Laurens Jah Blessed Posts: 1,295 Karma: 1373 Join Date: Apr 2003 Location: The Netherlands Device: iPod Touch	Try enabling cookies to see if that helps.

02-27-2006, 03:39 AM	#4
cstray Junior Member Posts: 6 Karma: 10 Join Date: Feb 2006 Device: Zodiac2	Still getting the same thing with cookies enabled. If the proper links show up in the 'update report' then those are the ones getting downloaded, right? Just want to make sure that I am actually pulling the pages I think I am. I checked the source code for the printable pages, and oddly enough all of the extra stuff that I'm seeing on Plucker and not my computer browser is there, in the source code. So why doesn't it show up in my browser? I'm not http experienced enough to recognize what causes the difference...just wish I could make it disappear in Plucker so I don't have to scroll down so far to start the story! Also, is Firefox cookie support going to be added? I hardly use IE anymore.

02-27-2006, 04:08 AM	#5
Laurens Jah Blessed Posts: 1,295 Karma: 1373 Join Date: Apr 2003 Location: The Netherlands Device: iPod Touch	Problem is that Wired has many different types subsites, including news, archive, blogs, and hotwired. These all need separate link rewriting filters. It also uses JavaScript (which Sunrise does not support) to hide advertisements on the printable pages. Firefox cookies will not be supported.

02-28-2006, 03:19 AM	#6
cstray Junior Member Posts: 6 Karma: 10 Join Date: Feb 2006 Device: Zodiac2	got it. Guess I'll just have wade through the ads until they make a mobile-friendly page widely available again.

03-01-2006, 07:13 AM	#7
Laurens Jah Blessed Posts: 1,295 Karma: 1373 Join Date: Apr 2003 Location: The Netherlands Device: iPod Touch	You could try the Wired News in the Showcase or use the AvantGo workaround discovered by Alexander.

01-19-2008, 05:40 PM	#9
doogie68 Connoisseur Posts: 78 Karma: 2260 Join Date: Jan 2006 Device: TX	Pablo, unfortunately, you need to figure these things out, just like you would if you made a custom channel in AvantGo. Your personal tastes and resource needs are the ones that would dictate what these settings should be. I'd suggest you look at the wiki for sunrise, specifically the location linked below: https://wiki.mobileread.com/wiki/Sunr...s_for_your_SXL Good luck!

Advert

Advert