![]() |
#1 |
Zealot
![]() ![]() Posts: 106
Karma: 120
Join Date: Sep 2006
Location: Phoenix, AZ
Device: iPhone X, iPad Pro
|
SD Card Troubleshooting
I used Sony Connect software to put five rtf books onto my SD card (512mb DaneElec brand(?) SD). I disconnected the Reader, and put the SD Card in there, and turned on the unit. It scanned and read the books, but when I went to open one, it was like it lost the memory card entirely, and my book count went from 30 to 25. Successive insert/ejects couldn't get it to read those books on the SD card again.
The 512 SD card works fine in my PC, works fine through Sony Connect, but Sony Reader doesn't play well with it. I don't know if it's because it's an off brand or what. To troubleshoot, I took the 2gig mini-SD card out of my phone, put it in an adapter this time (ha ha), and put it into the Reader card slot. Bam! It cataloged all my rtf files and I was able to pull them up fine and read them. I remember a post where someone said that the Sony Reader only catalogs once, and beyond that you have to reset the Reader if files on a card change. Is this true? Does that mean if you take the SD card and add more books to it, Sony won't catalog those? Debating whether to just go purchase another SD card (this was an older one that worked fine up until now). I wanted to use my Magic Gate Pro Duo 512 mem stick from my PSP, but apparently they don't just sell the adapters by themselves anymore, so I'm out of luck there. Anyone had issues with it refusing to read certain SD card brands? |
![]() |
![]() |
![]() |
#2 |
Member
![]() Posts: 21
Karma: 14
Join Date: Sep 2006
|
No, it updates
I'm not sure about the compatibility issuse with your card, but the reader definitely detects changes (both adding and removing) when the card is inserted.
|
![]() |
![]() |
Advert | |
|
![]() |
#3 |
Gizmologist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 11,615
Karma: 929550
Join Date: Jan 2006
Location: Republic of Texas Embassy at Jackson, TN
Device: Pocketbook Touch HD3
|
It should re-cat the card each time it's inserted. Alternately, you can use the USB cable and put the files directly on the card via the Connect Software. It should work the way you're doing it, though.
I think I remember having a similar issue when I first had mine ... but it stopped after a few minutes and has behaved since then. ![]() |
![]() |
![]() |
![]() |
#4 |
Zealot
![]() ![]() Posts: 106
Karma: 120
Join Date: Sep 2006
Location: Phoenix, AZ
Device: iPhone X, iPad Pro
|
I've seen over the years with PocketPC's where certain SD readers/units are grumpy with certain brands of SD cards. It likes my 2gig Sandisk mini-SD just fine (actually catalogued surprisingly fast), so I may go pick up a "brand" name SD card and see if I have better luck.
Thanks for the confirmation on re-cataloguing items! |
![]() |
![]() |
![]() |
#5 | |
Addict
![]() ![]() Posts: 285
Karma: 129
Join Date: Sep 2006
Location: New England
Device: PRS-500 · iPad · K3
|
Quote:
![]() |
|
![]() |
![]() |
Advert | |
|
![]() |
#6 |
Zealot
![]() ![]() Posts: 106
Karma: 120
Join Date: Sep 2006
Location: Phoenix, AZ
Device: iPhone X, iPad Pro
|
I agree on the cover -- makes me nervous to flip it open, looks like it could pop off easily. I'll stick to USB transfer for the most part.
I do freelance writing on the side, and it's really nice to stick the mini SD card into the reader to read an article or manuscript I'm working on -- WAY nicer than reading it back on my tiny T-Mobile MDA screen ![]() |
![]() |
![]() |
![]() |
#7 |
Addict
![]() ![]() Posts: 285
Karma: 129
Join Date: Sep 2006
Location: New England
Device: PRS-500 · iPad · K3
|
Well, if Reader for some reason doesn't rescan SD card, you can alway reset it, and once rebooted Reader will rescan the card.
|
![]() |
![]() |
![]() |
#8 |
Connoisseur
![]() Posts: 66
Karma: 10
Join Date: Sep 2006
Location: TX, USA
Device: Sony Reader PRS-500 --- Nokia n800
|
I've actually had the exact same problem as you, tekchic, though I was trying to open some PDF files. I've been trying to use a Kingston 256 MB SD card.
The cache.xml is there fine (made from the Connect PC software), but anytime I've opened a PDF from the SD card the Reader has promptly went back to the main menu and delisted everything on the card. I guess I can also quickly check to see if it doesn't like that specific card or brand for whatever reason (I have a Viking 256 MB SD lying around as well, in addition to 128 MB & 512 MB Kingstons). Random question as you mention using PPCs as well: Do you have other programs for PPCs or anything that the Reader doesn't support on the card? I actually just pulled my card out from my Axim as it has lots of PDFs (in addition to several programs). |
![]() |
![]() |
![]() |
#9 |
Retired & reading more!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,764
Karma: 1884247
Join Date: Sep 2006
Location: North Alabama, USA
Device: Kindle 1, iPad Air 2, iPhone 6S+, Kobo Aura One
|
Tekchic, There is a difference between cards and the electronics that read them. I had a similar problem with an SD card in a camera. It worked for months & now no longer works in that camera but does work in another camera. Another SD card (different brand) works in the first camera. Go figure.
![]() |
![]() |
![]() |
![]() |
#10 | |
Gizmologist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 11,615
Karma: 929550
Join Date: Jan 2006
Location: Republic of Texas Embassy at Jackson, TN
Device: Pocketbook Touch HD3
|
Quote:
![]() After playing with the Reader for some time now, I think I was just seeing it as flimsy in comparison to the solid feel of the rest of the Reader. The tether/hinge is very flexible, but after closer examination, it also seems to be pretty tough. It's not stretchy at all, and it seems to stand up to moderate tugging without so much as a flinch. I'm still not going to do a failure test on it. ![]() |
|
![]() |
![]() |
![]() |
#11 |
Zealot
![]() ![]() Posts: 106
Karma: 120
Join Date: Sep 2006
Location: Phoenix, AZ
Device: iPhone X, iPad Pro
|
That's good to know on the slot cover! I'm generally pretty gentle with my electronics (aside from jamming wrong sized cards into the slot hahaha), so hopefully that won't be an issue.
What's funny is the 512mb card that's giving me issues is a clean formatted card. My 2gig mini-SD that works is the one i pulled right out of my MDA (running WinMobile 5), and it cataloged and worked fine! Maybe I'll just start loading up my 2gig and swapping between phone and reader ![]() |
![]() |
![]() |
![]() |
#12 | |
Gizmologist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 11,615
Karma: 929550
Join Date: Jan 2006
Location: Republic of Texas Embassy at Jackson, TN
Device: Pocketbook Touch HD3
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#13 |
Junior Member
![]() Posts: 9
Karma: 10
Join Date: Oct 2006
|
SD Cards Don't Work
I have tried two SD cards in my Reader, and neither one of them work. One is a brand new Patriot 1 gig (bought specifically for the Reader - obviously now a waste of money) and the other an old 64 mb I used in a digital camera. Does anybody have any suggestions on what will definitely work???
|
![]() |
![]() |
![]() |
#14 |
Addict
![]() ![]() Posts: 285
Karma: 129
Join Date: Sep 2006
Location: New England
Device: PRS-500 · iPad · K3
|
Have you tried to format your SD cards on your computer as FAT/FAT16?
|
![]() |
![]() |
![]() |
#15 |
Junior Member
![]() Posts: 9
Karma: 10
Join Date: Oct 2006
|
No, I haven't. How would I do that?
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Troubleshooting: Kindle 3 now has amnesia | dpettman | Amazon Kindle | 5 | 10-13-2010 02:10 AM |
Troubleshooting | miklizro | Astak EZReader | 28 | 08-23-2010 08:21 PM |
enTourage eDGe Troubleshooting | Batman Jr. | enTourage eDGe | 4 | 03-01-2010 01:47 PM |
Troubleshooting (device crash) | language gamer | PocketBook | 6 | 01-03-2010 12:24 AM |
PocketNews troubleshooting | Francesco | PocketBook | 0 | 11-22-2009 01:36 AM |