My Pixelar ereader

queens_own · 07-10-2012, 09:23 AM

Hi All,
I have the S6-5w ereader and I am only just getting to grips with it, it being my first ereader although it is a replacement for one I was given at xmas, that one was very eratic, in trying to get a font that I could read I found that I was scrolling across the page for every line, then after playing with it I got a font that was usable, then the bookmarks started to play up...at no time did a bookmark ever give me any info of page No ect, then it started to take me to a page that was several pages in front or behind the bookmark, then it finaly froze, sent it back and received a replacement which does seem to be working ok in all the departments mentioned above.
However I now have 14 bookmarks...how do I delete the old ones, (not in the manual) and when connected to either the pc or the mains how long does the battery take to charge and does anything show you that it is charged? (again not in the manual).
I am using Mobi as the format which can be changed in Calibre, is this the ideal format? is there a format that is right for this ereader?
Ken

Stormchild · 07-10-2012, 02:15 PM

I am pretty certain that is not a Hanlin model. You might want to find a more appropriate section for your question.

Billi · 07-10-2012, 04:36 PM

Are you sure, Stormchild? At least they link to the Hanlin firmware on their website.

Stormchild · 07-11-2012, 04:27 AM

They link to the Hanlin V3 firmware. That is the model they sold previously. I might be wrong but I see no connection between the S6-5w and Hanlin.

queens_own · 07-11-2012, 07:38 AM

Hi Guys,
Maybe I should have added the make of the mreader which is Pixelar, does that make a difference to where I look?
Ken

Stormchild · 07-11-2012, 05:09 PM

No. Pixelar only re-brand their products. Their early models were manufactured by Hanlin but I am positive this one is not. Can you not contact Pixelar? It sounds like a perfectly reasonable Support question.

There is a thread here https://www.mobileread.com/forums/sho...d.php?t=182671 about the same model and it is in the general section. A more likely place for you to get an answer.

pholy · 07-11-2012, 05:50 PM

I took a look at a firmware upgrade from the Pixelar site and this is no Hanlin reader, which always used software from Jinke. The hardware pictures don't look like anything I've seen before, either. Sorry, without taking it apart, I can't help

I don't guarentee to put it back together, though...

queens_own · 07-14-2012, 12:58 PM

Hi,
It seems that this is the place for my Pixelar ereader see below...
Ken
HanLin eBook
OEM manufacturer of E ink and SiPix devices. Branded Hanlin readers include Walkbook, lBook eReader, Apollo, Papyre, Pixelar E-Reader, Koobe, ECO Reader

Stormchild · 07-14-2012, 02:40 PM

I have already told you. The earlier Pixelar were Hanlins. This one, the one you have, is not. Still don't listen to me, you carry on. I await the response from other owners of this machine.

ps. Have you tried contacting Pixelar?

DaleDe · 07-16-2012, 12:41 PM

Does it look like this?
http://www.chinitech.com/en/2010/pmp...nologie-e-ink/

http://factory.dhgate.com/learning-m...p36992202.html

Hanvon is not Hanlins.

queens_own · 07-16-2012, 12:55 PM

Hi DaleDe,
Yes it is the same as the first link, sold and advertised by Pixelar who...doesn't appear to have a section on this forum! although they also sold Hanlins, perhaps you could suggest one, its alright keep saying this isn't the right place to visit but how about a helping hand in telling me where I should be.
Ken

Stormchild · 07-16-2012, 03:38 PM

I did and you posted there.
https://www.mobileread.com/forums/forumdisplay.php?f=216

I still reckon your best bet is to contact Pixelar.

DaleDe · 07-17-2012, 02:12 AM

Quote:

Originally Posted by queens_own

Hi DaleDe,
Yes it is the same as the first link, sold and advertised by Pixelar who...doesn't appear to have a section on this forum! although they also sold Hanlins, perhaps you could suggest one, its alright keep saying this isn't the right place to visit but how about a helping hand in telling me where I should be.
Ken

Actually I believe both links point to the same hardware device which is made by Hanvon. The labels are different but I think if you look close you will see they are both the same.

Dale

07-10-2012, 09:23 AM	#1
queens_own Member Posts: 20 Karma: 11826 Join Date: Jul 2012 Location: On an Island near Colchester Device: Pixelar mreader	My Pixelar ereader Hi All, I have the S6-5w ereader and I am only just getting to grips with it, it being my first ereader although it is a replacement for one I was given at xmas, that one was very eratic, in trying to get a font that I could read I found that I was scrolling across the page for every line, then after playing with it I got a font that was usable, then the bookmarks started to play up...at no time did a bookmark ever give me any info of page No ect, then it started to take me to a page that was several pages in front or behind the bookmark, then it finaly froze, sent it back and received a replacement which does seem to be working ok in all the departments mentioned above. However I now have 14 bookmarks...how do I delete the old ones, (not in the manual) and when connected to either the pc or the mains how long does the battery take to charge and does anything show you that it is charged? (again not in the manual). I am using Mobi as the format which can be changed in Calibre, is this the ideal format? is there a format that is right for this ereader? Ken

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pixelar Mreader	mclien	More E-Book Readers	1	07-11-2012 05:30 PM
Pixelar MReader	DG1966	More E-Book Readers	1	07-11-2012 05:26 PM
Pixelar MReader 912T ?	owly	HanLin eBook	6	11-20-2011 06:36 AM
Pixelar (UK) is launching new ereader	Ea	News	19	11-13-2011 11:29 AM
Pixelar - New Hanlin V3 distributor in the UK	gwynevans	News	12	02-02-2009 04:52 PM

07-10-2012, 02:15 PM	#2
Stormchild Evangelist Posts: 466 Karma: 878943 Join Date: Jan 2009 Location: Cornwall UK Device: BeBook 1. BeBook Mini. BeBook Neo and Club. BeBook Live. BeeBook Pure.	I am pretty certain that is not a Hanlin model. You might want to find a more appropriate section for your question.

07-10-2012, 04:36 PM	#3
Billi Wizard Posts: 3,388 Karma: 14190103 Join Date: Jun 2009 Location: Berlin Device: Cybook, iRex, PB, Onyx	Are you sure, Stormchild? At least they link to the Hanlin firmware on their website.

07-11-2012, 04:27 AM	#4
Stormchild Evangelist Posts: 466 Karma: 878943 Join Date: Jan 2009 Location: Cornwall UK Device: BeBook 1. BeBook Mini. BeBook Neo and Club. BeBook Live. BeeBook Pure.	They link to the Hanlin V3 firmware. That is the model they sold previously. I might be wrong but I see no connection between the S6-5w and Hanlin.

07-11-2012, 07:38 AM	#5
queens_own Member Posts: 20 Karma: 11826 Join Date: Jul 2012 Location: On an Island near Colchester Device: Pixelar mreader	Hi Guys, Maybe I should have added the make of the mreader which is Pixelar, does that make a difference to where I look? Ken

07-11-2012, 05:09 PM	#6
Stormchild Evangelist Posts: 466 Karma: 878943 Join Date: Jan 2009 Location: Cornwall UK Device: BeBook 1. BeBook Mini. BeBook Neo and Club. BeBook Live. BeeBook Pure.	No. Pixelar only re-brand their products. Their early models were manufactured by Hanlin but I am positive this one is not. Can you not contact Pixelar? It sounds like a perfectly reasonable Support question. There is a thread here https://www.mobileread.com/forums/sho...d.php?t=182671 about the same model and it is in the general section. A more likely place for you to get an answer.

07-11-2012, 05:50 PM	#7
pholy Booklegger Posts: 1,801 Karma: 7999816 Join Date: Jun 2009 Location: Toronto, Ontario, Canada Device: BeBook(1 & 2010), PEZ, PRS-505, Kobo BT, PRS-T1, Playbook, Kobo Touch	I took a look at a firmware upgrade from the Pixelar site and this is no Hanlin reader, which always used software from Jinke. The hardware pictures don't look like anything I've seen before, either. Sorry, without taking it apart, I can't help I don't guarentee to put it back together, though...

07-14-2012, 12:58 PM	#8
queens_own Member Posts: 20 Karma: 11826 Join Date: Jul 2012 Location: On an Island near Colchester Device: Pixelar mreader	Hi, It seems that this is the place for my Pixelar ereader see below... Ken HanLin eBook OEM manufacturer of E ink and SiPix devices. Branded Hanlin readers include Walkbook, lBook eReader, Apollo, Papyre, Pixelar E-Reader, Koobe, ECO Reader

07-14-2012, 02:40 PM	#9
Stormchild Evangelist Posts: 466 Karma: 878943 Join Date: Jan 2009 Location: Cornwall UK Device: BeBook 1. BeBook Mini. BeBook Neo and Club. BeBook Live. BeeBook Pure.	I have already told you. The earlier Pixelar were Hanlins. This one, the one you have, is not. Still don't listen to me, you carry on. I await the response from other owners of this machine. ps. Have you tried contacting Pixelar?

07-16-2012, 12:41 PM	#10
DaleDe Grand Sorcerer Posts: 11,470 Karma: 13095790 Join Date: Aug 2007 Location: Grass Valley, CA Device: EB 1150, EZ Reader, Literati, iPad 2 & Air 2, iPhone 7	Does it look like this? http://www.chinitech.com/en/2010/pmp...nologie-e-ink/ http://factory.dhgate.com/learning-m...p36992202.html Hanvon is not Hanlins.

07-16-2012, 12:55 PM	#11
queens_own Member Posts: 20 Karma: 11826 Join Date: Jul 2012 Location: On an Island near Colchester Device: Pixelar mreader	Hi DaleDe, Yes it is the same as the first link, sold and advertised by Pixelar who...doesn't appear to have a section on this forum! although they also sold Hanlins, perhaps you could suggest one, its alright keep saying this isn't the right place to visit but how about a helping hand in telling me where I should be. Ken

Advert

Advert

07-16-2012, 03:38 PM	#12
Stormchild Evangelist Posts: 466 Karma: 878943 Join Date: Jan 2009 Location: Cornwall UK Device: BeBook 1. BeBook Mini. BeBook Neo and Club. BeBook Live. BeeBook Pure.	I did and you posted there. https://www.mobileread.com/forums/forumdisplay.php?f=216 I still reckon your best bet is to contact Pixelar.