Tirwal 3.0 TripleBoot ES 090610

Tirwal · 06-09-2010, 07:34 PM

Hi:

I compile new version of the firm, old kernel. It has lastest version of CoolReader, 3.0.31, 09 June 2010. This version can read CHM, support for big files, and cache optimized for fast reopening.

Tirwal 3.0 - Triple Boot ES 090610

http://www.4shared.com/file/oKj6qLLp...0ES090610.html

Now, CoolReader opens CHM in LBook and Hanlin mode, and FBReader in its mode.
Other specs are the same.

Thanks

orion777 · 06-10-2010, 01:30 AM

Thanks, I installed 2.9 a few days ago. It's very good.

teemac · 06-11-2010, 06:01 AM

Thanks for the updated firmware.

I'm a middle aged guy - nearly 60 (I intend to live to be 120) and do a lot of reading on my EcoReader (Hanlin v3 clone).

I have found your firmware the best.

Thanks again.

Soxendom · 06-11-2010, 02:39 PM

I downloaded this today and put the config files on the main reader (not the SD card) but when I rebooted I didn't get any choice about which version to use. It just came up with "Tirwell ereader" or something like that. I assumed that the default was the Lbook and coolreader which was the main reason I was trying it.

I thought this version of coolreader could be used to read epubs, but when I long-pressed the number of the book, and pressed 1 to open it went into ADE. Am I doing something wrong or does this use ADE for epubs?

cloggy · 06-11-2010, 05:11 PM

Hi, had the same experiences with ePub not opened by CoolReader...so back to the latest Buggins version where longpressing the number key and then selecting 1 will force CoolReader to open the ePub book.

Tirwal · 06-12-2010, 05:45 PM

Hi:

In the zip there is a directory called "config". Put it in principal memory. Inside it, there are 3 djvu files. When you want to change mode, you must press over the option, and power off and on the reader. Coolreader opens epub in FBReader mode. In the other modes, epubs are opened by ADE. This firm is based on "old kernel" due its stability, and well running of all file type readers. New kernel, has some fails in some file type readers, and has a minor probles with keys, and battery.

Bye

Lbooker · 06-14-2010, 02:19 PM

Very buggy! Many reboots.
For example:
- when trying to change the date
- when trying to go to page 2 of the settings of a rtf file
- when opening another rtf file

The worst firmware I ever tried! A total nightmare.

Rangepath · 06-16-2010, 06:36 PM

Quote:

Originally Posted by Lbooker

Very buggy! Many reboots.
For example:
- when trying to change the date
- when trying to go to page 2 of the settings of a rtf file
- when opening another rtf file

The worst firmware I ever tried! A total nightmare.

I must say that this firmware works perfectly for me as did his previous version. Perhaps the problems you are experiencing lie elsewhere...sd card or hardware for example.

BobC · 07-09-2010, 06:31 AM

I had problems with this version - when reading FB2 books loaded on a SD card either trying to exit the book or set a bookmark the green LED flashed continuously and no other effect. Only way out then was the power switch.

The SD card performs fine on the same files when I reverted to the 2.9 Firmware.

BobC

Tirwal · 07-09-2010, 06:42 PM

Hi:

I have new version with updated coolreader.

Download Link

http://www.4shared.com/file/mx00x1ir...31-220610.html

And I have an experimental version with new kernel.

Download link

http://www.4shared.com/file/4LmGwFWW...K26062010.html

If you want to follow this and other efforts, visit our spanish forum:

http://translate.google.com/translat....php%3F9-Jinke

Thanks

dioib · 07-13-2010, 07:39 PM

Thank you, Tirwal! I am trying to update from some older version (probably 2.9x) but it says "please check your update file".

Tirwal · 07-14-2010, 05:07 AM

Quote:

Originally Posted by dioib

Thank you, Tirwal! I am trying to update from some older version (probably 2.9x) but it says "please check your update file".

Hi:

Maybe you have something wrong in your SD, or the downloaded file is wrong. Check it.

Thanks

dioib · 07-14-2010, 11:50 AM

Quote:

Originally Posted by Tirwal

Hi:

Maybe you have something wrong in your SD, or the downloaded file is wrong. Check it.

Thanks

Thanks for your reply. My card is working fine, I downloaded the first one, but it just ends up giving the "invalid file" error message. I wish someone else could check and see if I am the only person with this issue.

Edit: Issue fixed, I was using SDHC instead of SD for update.

triggerfish · 11-25-2010, 04:46 AM

Hi,
Downloaded Tirwal 3.0 - Triple Boot ES 090610 and installed it without problems...
Downloaded the 220610 version and it says it updated things, but the version teh bebook return stays 090610... What's up ???
Peter

dioib · 11-26-2010, 01:54 AM

I am using 220610 with "config files" borrowed from Tirwal 3.0 - Triple Boot ES 090610 and it has been working fine so far.

06-09-2010, 07:34 PM	#1
Tirwal Enthusiast Posts: 45 Karma: 369 Join Date: Dec 2009 Location: Spain Device: BQ Cervantes 4	Tirwal 3.0 TripleBoot ES 090610 Hi: I compile new version of the firm, old kernel. It has lastest version of CoolReader, 3.0.31, 09 June 2010. This version can read CHM, support for big files, and cache optimized for fast reopening. Tirwal 3.0 - Triple Boot ES 090610 http://www.4shared.com/file/oKj6qLLp...0ES090610.html Now, CoolReader opens CHM in LBook and Hanlin mode, and FBReader in its mode. Other specs are the same. Thanks

06-12-2010, 05:45 PM	#6
Tirwal Enthusiast Posts: 45 Karma: 369 Join Date: Dec 2009 Location: Spain Device: BQ Cervantes 4	Hi: In the zip there is a directory called "config". Put it in principal memory. Inside it, there are 3 djvu files. When you want to change mode, you must press over the option, and power off and on the reader. Coolreader opens epub in FBReader mode. In the other modes, epubs are opened by ADE. This firm is based on "old kernel" due its stability, and well running of all file type readers. New kernel, has some fails in some file type readers, and has a minor probles with keys, and battery. Bye Last edited by Tirwal; 06-12-2010 at 05:52 PM.

07-13-2010, 07:39 PM	#11
dioib ∂₪≈☼ Posts: 113 Karma: 550104 Join Date: Jan 2010 Device: ιη.σιγ.ηιφι.κα	Thank you, Tirwal! I am trying to update from some older version (probably 2.9x) but it says "please check your update file". Last edited by dioib; 07-13-2010 at 08:07 PM.

11-26-2010, 01:54 AM	#15
dioib ∂₪≈☼ Posts: 113 Karma: 550104 Join Date: Jan 2010 Device: ιη.σιγ.ηιφι.κα	I am using 220610 with "config files" borrowed from Tirwal 3.0 - Triple Boot ES 090610 and it has been working fine so far. Last edited by dioib; 11-26-2010 at 01:58 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tirwal and the V3+	BookStalker	HanLin eBook	4	04-09-2010 02:58 PM
New Firm Tirwal 2.7 TripleBoot - xPDF - FBReader	Tirwal	HanLin eBook	44	03-26-2010 08:08 PM

06-10-2010, 01:30 AM	#2
orion777 Junior Member Posts: 1 Karma: 10 Join Date: Jun 2010 Device: BeBook	Thanks, I installed 2.9 a few days ago. It's very good.

06-11-2010, 06:01 AM	#3
teemac Member Posts: 21 Karma: 140 Join Date: Jan 2010 Location: NSW, Australia Device: ECO Reader V3ext, ECO Reader V3+	Thanks for the updated firmware. I'm a middle aged guy - nearly 60 (I intend to live to be 120) and do a lot of reading on my EcoReader (Hanlin v3 clone). I have found your firmware the best. Thanks again.

06-11-2010, 02:39 PM	#4
Soxendom Connoisseur Posts: 62 Karma: 10 Join Date: May 2009 Device: Sony PRS T1	I downloaded this today and put the config files on the main reader (not the SD card) but when I rebooted I didn't get any choice about which version to use. It just came up with "Tirwell ereader" or something like that. I assumed that the default was the Lbook and coolreader which was the main reason I was trying it. I thought this version of coolreader could be used to read epubs, but when I long-pressed the number of the book, and pressed 1 to open it went into ADE. Am I doing something wrong or does this use ADE for epubs?

06-11-2010, 05:11 PM	#5
cloggy Connoisseur Posts: 78 Karma: 10 Join Date: Jul 2009 Location: Amstelveen, NL Device: Kobo Aura HD, Sony PRS-T1	Hi, had the same experiences with ePub not opened by CoolReader...so back to the latest Buggins version where longpressing the number key and then selecting 1 will force CoolReader to open the ePub book.

06-14-2010, 02:19 PM	#7
Lbooker Addict Posts: 316 Karma: 1021312 Join Date: Jun 2009 Device: Sony PRS-T1	Very buggy! Many reboots. For example: - when trying to change the date - when trying to go to page 2 of the settings of a rtf file - when opening another rtf file The worst firmware I ever tried! A total nightmare.

07-09-2010, 06:31 AM	#9
BobC Guru Posts: 691 Karma: 3026110 Join Date: Dec 2008 Location: Lancashire, U.K. Device: BeBook 1, BeBook Pure, Kobo Glo, (and HD),Energy Sistem EReader Pro +	I had problems with this version - when reading FB2 books loaded on a SD card either trying to exit the book or set a bookmark the green LED flashed continuously and no other effect. Only way out then was the power switch. The SD card performs fine on the same files when I reverted to the 2.9 Firmware. BobC

07-09-2010, 06:42 PM	#10
Tirwal Enthusiast Posts: 45 Karma: 369 Join Date: Dec 2009 Location: Spain Device: BQ Cervantes 4	Hi: I have new version with updated coolreader. Download Link http://www.4shared.com/file/mx00x1ir...31-220610.html And I have an experimental version with new kernel. Download link http://www.4shared.com/file/4LmGwFWW...K26062010.html If you want to follow this and other efforts, visit our spanish forum: http://translate.google.com/translat....php%3F9-Jinke Thanks

11-25-2010, 04:46 AM	#14
triggerfish Member Posts: 12 Karma: 10 Join Date: Nov 2010 Device: Bebook	Hi, Downloaded Tirwal 3.0 - Triple Boot ES 090610 and installed it without problems... Downloaded the 220610 version and it says it updated things, but the version teh bebook return stays 090610... What's up ??? Peter

Advert

Advert