Color jetbook color internal pics

paperwastage · 03-14-2012, 01:28 AM

Took pics of a partial teardown of the jbc, will post more pics, but here is the main juicy parts...

Is there an easier way to remove the EM shielding?

mod186k1 · 03-14-2012, 07:38 AM

oh! no other hw inside, then

Ok, I can always use the useless internal space....

Click image for larger version

Name: DSCN0987.JPG
Views: 1270
Size: 35.3 KB
ID: 83901

... to store my microSD adapter

I'm Joking!

ProDigit · 03-14-2012, 09:18 AM

Amazing that it uses only one battery cell in the compartment!
If they had created the JBC, without all that steel, and a flexible e-ink/Oled screen, the device might have weighed half the weight, even if it had twice the battery capacity!

So far not much interesting to see, perhaps the other side of the board shows more?

lorenzoens · 03-14-2012, 11:37 AM

You're right, but usually a 9,7" isn't intended to be that much portable.

I did a little survey, from which results that 9,7" buyers usually read at home or at work

paperwastage · 03-14-2012, 03:01 PM

ill post the rest of the pics when I get home

the entire housing is plastic, and feels heavy/thick. once I removed every piece of the housing, it is relatively light and thinnish.

more important stuff, how do I get access to under the EM shielding to look at the chips/traces to see if there's a jtag? under side of circuit board is rather bland as well

ProDigit · 03-14-2012, 07:14 PM

I have the Sony PRS-505, original Jetbook, and the Astak Reader Pro.
The same order is in order of weight. The PRS505, is freaking heavy, because it uses metal in it's housing. The original Jetbook is much lighter; but the astak feels just as sturdy, made entirely out of plastic, weighs almost half the Jetbook's weight, and about 1/3rd to a quarter of the weight of the Sony PRS-505!

I think Ectaco is generally using a lot of metal within the device that is not necessary!
If they wanted to shield the hardware, they could have used foil instead of plates; it would reduce weight significantly!

The Jetbook Color, due to it's weight, is actually becoming more brittle,than if it was made entirely out of plastic. I'm quite sure it will not survive a drop/fall off a table onto a hard floor, eventhough the internals are quite sturdy, the casing and perhaps screen would break more easily

mod186k1 · 03-14-2012, 08:00 PM

So If a burglar try to break in my house I can use my JBC as a weapon

PF4Mobile · 03-17-2012, 02:52 AM

Quote:

Originally Posted by mod186k1

So If a burglar try to break in my house I can use my JBC as a weapon

Yeap donate it to save your live
The burglar will try to sell it and he will get killed by the buyer for ripping him off when the buyer realizes how much he paid for what he got.

repods · 03-17-2012, 05:05 AM

Quote:

Originally Posted by paperwastage

Took pics of a partial teardown of the jbc, will post more pics, but here is the main juicy parts...

Is there an easier way to remove the EM shielding?

wow a building quality impressive !

go have a look at ipad3 internals here :http://www.ifixit.com/Teardown/iPad-...eardown/8277/1
and understand what means engineering,
it does not mean "adhesive tape"

andyh2000 · 03-17-2012, 06:38 AM

Quote:

Originally Posted by repods

wow a building quality impressive !

go have a look at ipad3 internals here :http://www.ifixit.com/Teardown/iPad-...eardown/8277/1
and understand what means engineering,
it does not mean "adhesive tape"

No, it means copious quantities of glue, and don't even think of trying to change the battery yourself.

Andrew

Posted from an iPad 1

vidmasze · 05-01-2012, 01:36 PM

interesting, looking in the picture, it is what I thought the first minute, JBC is based on Hanvon reader that is sold solely in china

http://goodereader.com/blog/electron...olor-e-reader/

for fun, maybe chineese hanvon software is not so crappy as JBCs is right now [that I still doubt]

ProDigit · 05-01-2012, 02:33 PM

I don't see a reason to install B&W firmware on a color device.

Ken Maltby · 05-01-2012, 03:50 PM

Quote:

Originally Posted by vidmasze

interesting, looking in the picture, it is what I thought the first minute, JBC is based on Hanvon reader that is sold solely in china

http://goodereader.com/blog/electron...olor-e-reader/

for fun, maybe chineese hanvon software is not so crappy as JBCs is right now [that I still doubt]

How's your Chinese? The Hanvon C920 firmware apparently had a number
of it's own problems. As I understand it the JBC firmware made some real
improvements on the initial drivers and utilities as well as using their own
implementations of various software products.

Luck;
Ken

Dulin's Books · 05-01-2012, 07:46 PM

Quote:

Originally Posted by ProDigit

I don't see a reason to install B&W firmware on a color device.

he pointed to a C920 page not an E920 page

joblack · 05-02-2012, 09:33 AM

The free space is for a planned 3g sim version?

03-14-2012, 01:28 AM	#1
paperwastage Groupie Posts: 154 Karma: 1310 Join Date: Dec 2009 Device: kindle DX Graphite	jetbook color internal pics Took pics of a partial teardown of the jbc, will post more pics, but here is the main juicy parts... Is there an easier way to remove the EM shielding?

03-14-2012, 07:38 AM	#2
mod186k1 Addict Posts: 233 Karma: 256666 Join Date: May 2008 Location: Italy Device: iLiad, PRS-T3, Kobo GLO HD, Paperwhite 2, PB Ultra, Ony Boox Max	oh! no other hw inside, then Ok, I can always use the useless internal space.... ... to store my microSD adapter I'm Joking! Last edited by mod186k1; 03-14-2012 at 07:41 AM.

05-01-2012, 01:36 PM	#11
vidmasze Junior Member Posts: 1 Karma: 10 Join Date: May 2012 Device: none	this is in fact hanvon! interesting, looking in the picture, it is what I thought the first minute, JBC is based on Hanvon reader that is sold solely in china http://goodereader.com/blog/electron...olor-e-reader/ for fun, maybe chineese hanvon software is not so crappy as JBCs is right now [that I still doubt]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Color New to the JetBook world..intrested in buying JetBook Color	PF4Mobile	Ectaco jetBook	95	02-24-2012 06:09 PM
Color eInk. Jetbook Color Available for Pre Order	X read X	News	37	12-09-2011 02:57 PM
Color ereader & pics	pendragginp	General Discussions	12	04-08-2011 09:58 PM
JetBook Lite internal software?	steven522	Ectaco jetBook	0	04-26-2010 12:40 PM
PRS-500 Sony Reader gets naked - internal pics for all to see!	Bob Russell	Sony Reader Dev Corner	0	11-04-2006 09:26 PM

03-14-2012, 09:18 AM	#3
ProDigit Karmaniac Posts: 2,553 Karma: 11499146 Join Date: Oct 2008 Location: Miami FL Device: PRS-505, Jetbook, + Mini, +Color, Astak Ez Reader Pro, PPW1, Aura H2O	Amazing that it uses only one battery cell in the compartment! If they had created the JBC, without all that steel, and a flexible e-ink/Oled screen, the device might have weighed half the weight, even if it had twice the battery capacity! So far not much interesting to see, perhaps the other side of the board shows more?

03-14-2012, 11:37 AM	#4
lorenzoens ex se ens Posts: 348 Karma: 1020253 Join Date: Jun 2011 Location: Italy Device: enTourage edge & Pocket, Sony T1, Galaxy Note I, ex many others	You're right, but usually a 9,7" isn't intended to be that much portable. I did a little survey, from which results that 9,7" buyers usually read at home or at work

03-14-2012, 03:01 PM	#5
paperwastage Groupie Posts: 154 Karma: 1310 Join Date: Dec 2009 Device: kindle DX Graphite	ill post the rest of the pics when I get home the entire housing is plastic, and feels heavy/thick. once I removed every piece of the housing, it is relatively light and thinnish. more important stuff, how do I get access to under the EM shielding to look at the chips/traces to see if there's a jtag? under side of circuit board is rather bland as well

03-14-2012, 07:14 PM	#6
ProDigit Karmaniac Posts: 2,553 Karma: 11499146 Join Date: Oct 2008 Location: Miami FL Device: PRS-505, Jetbook, + Mini, +Color, Astak Ez Reader Pro, PPW1, Aura H2O	I have the Sony PRS-505, original Jetbook, and the Astak Reader Pro. The same order is in order of weight. The PRS505, is freaking heavy, because it uses metal in it's housing. The original Jetbook is much lighter; but the astak feels just as sturdy, made entirely out of plastic, weighs almost half the Jetbook's weight, and about 1/3rd to a quarter of the weight of the Sony PRS-505! I think Ectaco is generally using a lot of metal within the device that is not necessary! If they wanted to shield the hardware, they could have used foil instead of plates; it would reduce weight significantly! The Jetbook Color, due to it's weight, is actually becoming more brittle,than if it was made entirely out of plastic. I'm quite sure it will not survive a drop/fall off a table onto a hard floor, eventhough the internals are quite sturdy, the casing and perhaps screen would break more easily

03-14-2012, 08:00 PM	#7
mod186k1 Addict Posts: 233 Karma: 256666 Join Date: May 2008 Location: Italy Device: iLiad, PRS-T3, Kobo GLO HD, Paperwhite 2, PB Ultra, Ony Boox Max	So If a burglar try to break in my house I can use my JBC as a weapon

05-01-2012, 02:33 PM	#12
ProDigit Karmaniac Posts: 2,553 Karma: 11499146 Join Date: Oct 2008 Location: Miami FL Device: PRS-505, Jetbook, + Mini, +Color, Astak Ez Reader Pro, PPW1, Aura H2O	I don't see a reason to install B&W firmware on a color device.

05-02-2012, 09:33 AM	#15
joblack Wizard Posts: 1,746 Karma: 4382688 Join Date: Jul 2006 Location: Somewhere on earth Device: Onyx Boox Tab X	The free space is for a planned 3g sim version?

Advert

Advert