PRS-350 and Sony prs-650 stylus.

ersott · 02-21-2013, 07:13 AM

Hello.

Do you know if stylus in 350 and 650 are same size?.

Can I put stylus 350 in 650 hollow's stylus?

thanks in advanced.

Ripplinger · 02-21-2013, 01:27 PM

Yes, they're the same. If you broke one, remember you can order one for a reasonable price that chris77586 made for us through Shapeways. The only difference is that it doesn't have the "notch" around the tip, which I think is what makes it snap into place. The replacement stylus stays firmly in though, there's no chance of it slipping out, and they're very sturdy.

When I remember to pick up a small circular saw for my Dremel, I'm going to try and add that notch to the end and see if that is indeed what makes it "snap" in place.

ersott · 02-21-2013, 07:14 PM

I got a semi broken sony prs-350, and see a sony prs-650 that loose stylus.

I will see in shapeways if broke my stylus in the future, Thanks!

jj2me · 02-21-2013, 11:39 PM

Always pull your stylus straight up until it clears the silo. I believe most breakage comes from pulling the stylus up and to the right before it clears the silo.

ersott · 02-22-2013, 04:09 AM

Thanks, I'll remember

02-21-2013, 07:13 AM	#1
ersott Evangelist Posts: 413 Karma: 650430 Join Date: Apr 2010 Device: Kindle paperwhite2, Ipad Air, Kobo Aura H2o	and Sony prs-650 stylus. Hello. Do you know if stylus in 350 and 650 are same size?. Can I put stylus 350 in 650 hollow's stylus? thanks in advanced.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sony PRS 650 vs PRS 350 CPU	yoanna	Sony Reader Dev Corner	0	04-25-2012 03:09 PM
Sony 350 & 650 Stylus	JenPen1	Sony Reader	3	08-11-2011 04:06 PM
Sony PRS-950 or PRS-650, or even the Kindle 3	sivajayaraman	Which one should I buy?	9	04-15-2011 03:28 AM
PRS-650 Replacement stylus for PRS-650?	Jacobs_43	Sony Reader	20	02-21-2011 04:15 AM

02-21-2013, 01:27 PM	#2
Ripplinger 350 Hoarder Posts: 3,574 Karma: 8281267 Join Date: Dec 2010 Location: Midwest USA Device: Sony PRS-350, Kobo Glo & Glo HD, PW2	Yes, they're the same. If you broke one, remember you can order one for a reasonable price that chris77586 made for us through Shapeways. The only difference is that it doesn't have the "notch" around the tip, which I think is what makes it snap into place. The replacement stylus stays firmly in though, there's no chance of it slipping out, and they're very sturdy. When I remember to pick up a small circular saw for my Dremel, I'm going to try and add that notch to the end and see if that is indeed what makes it "snap" in place.

02-21-2013, 07:14 PM	#3
ersott Evangelist Posts: 413 Karma: 650430 Join Date: Apr 2010 Device: Kindle paperwhite2, Ipad Air, Kobo Aura H2o	I got a semi broken sony prs-350, and see a sony prs-650 that loose stylus. I will see in shapeways if broke my stylus in the future, Thanks!

02-21-2013, 11:39 PM	#4
jj2me Guru Posts: 820 Karma: 8820388 Join Date: Dec 2008 Device: Sony PRS-505, -350; Kindle 3 3G, DX, PW 2; various tablets	Always pull your stylus straight up until it clears the silo. I believe most breakage comes from pulling the stylus up and to the right before it clears the silo.

02-22-2013, 04:09 AM	#5
ersott Evangelist Posts: 413 Karma: 650430 Join Date: Apr 2010 Device: Kindle paperwhite2, Ipad Air, Kobo Aura H2o	Thanks, I'll remember

Advert

Advert