M96 + T68. Updates and more ... - Page 61

Brandobras · 07-29-2017, 08:42 AM

Quote:

Originally Posted by hubertphava

T68 with 1.8.2 firmware, no root. Default reader. Moon+reader free edition.

I'm having random reboots while reading. Does anyone has such a similar behaviour?
Battery charge is rarely below 40% but reboots happen in the entire range of charge.
As said, no root and after upgrade t68 has had a "factory" reset".

The only non stock app installed is Moon+reader.
Also in "Settings-->App" i've disabled some apps, like the phone, messages and mail; T68 is always in Airplane mode for reducing battery drain ( in this mode i have anyway my wifi connection, when it's necessary).

Any idea/suggestion about annoyng reboots?

HP

Hello,
same configuration, but my reading app is pocketbook; no apps disabled. Airplane mode too. No reboots in my case. i would try enabling the disabled apps...

good luck!

hubertphava · 07-31-2017, 05:07 PM

Pocketbook eh? It seems a good app. Installed on ny nexus-6 is ok but if i try to install on my t68, GPlay says it's non compatible with my software version.
Current pocketbook version is (according with Gplay): 2.01
What version have you, Brando?

HP

Brandobras · 08-01-2017, 06:16 PM

Quote:

Originally Posted by hubertphava

Pocketbook eh? It seems a good app. Installed on ny nexus-6 is ok but if i try to install on my t68, GPlay says it's non compatible with my software version.
Current pocketbook version is (according with Gplay): 2.01
What version have you, Brando?

HP

I have 2.01. You can't install it via Gplay but have to download the apk and install it on the device (i can pass it to you if you need it). It works almost perfectly. The only problem i have is that one of the configuration menus is not readable (black on black). but when you select the line the options are readable again
I like pocketbook because it maintains the original layout, format and font of the ebook i'm reading and it's what i want.
I was not able to do the same with Alreader nor with Moon+ reader (i have the paid version).
I'm also thinking to buy a pocketbook device to replace my T68... but I don't like them aesthetically...

regards

hubertphava · 08-04-2017, 03:37 PM

ThankYou BB: found and installed the apk.
Now i only have to end the reading of my actual book before "The Great Switch" (TM)
;-)

Ah: and i'll start to ssearch some review about powerbook devices (T68 is a good device but i like much more 6" respect 6,8).

HP

notger · 07-08-2018, 05:43 AM

Hi,

does anyone have the most recent m96 plus Android.
android 4.0 and the experimental android 4.4 oder even higher.
I never looked up further developement in the last years.

greets

Notger

smmadge · 07-20-2018, 04:20 AM

Quote:

Hi,

does anyone have the most recent m96 plus Android.
android 4.0 and the experimental android 4.4 oder even higher.
I never looked up further developement in the last years.

greets

Notger

I am looking for exactly the same 4.4 firmware and needed tools...

bsnick · 07-21-2018, 06:50 PM

I have:

M96 & M96+ Kit Kat from: 2015-11-29 & 2017-05-02:
M96_KK_2015-11-29_19-41_dev_6b96172_eng.zip
M96_KK_2017-05-02_19-37_dev_fbc2cc2_user.zip

M96 & M96+ Ice Cream Sandwich from: 2014-09-30 & 2015-11-12:
M96_2014-09-30_21-42_1.6.4_7efa90c_user.7z
M96_ICS_2015-11-12_01-52_dev_ac7be75_user.zip

T68+ (maybe T68 too) Kit Kat from: 2015-11-10 & 2017-05-02:
T68_KK_2017-05-02_20-53_dev_fbc2cc2_user.zip
T68_kk_2015-11-10_01-00_dev_4712b06_eng.zip

T68+ (maybe T68 too) Ice Cream Sandwich from 2017-05-03:
T68_ICS_2017-05-03_05-49_1.8.2_e54efe5_user_1.8.2.zip
T68_ics2015-11-11_00-14_dev_ac7be75_user.zip

These are the Mfgtool2 zip files from the old ereader store (Booxter's). The names were changed because they used to be more generic and I couldn't tell which was KK & which was ICS. Or maybe it was M96 & T68 I added. Or both. I forget. The M96 7zip file also has an update.zip in it. Not sure if it came that way or I did it myself.

Personally I've been using the older KK image without much issue, but I don't use the Onyx apps. I believe some problems were reported with the newer ones for some people so I never bothered to 'upgrade' mine.

These are mega links, but I've never tried sharing via Mega before, so I have no idea if I've done it right. Let me know.

smmadge · 07-22-2018, 08:58 AM

Thank you very much! This is exactly what i needed

Installing in 5 4 3 ..

syntheticLlama · 08-29-2018, 10:45 PM

So jumping through pages of various Boox forums I realized there is more than just downloading the: M96_KK_2017-05-02_19-37_dev_fbc2cc2_user.zip and renaming it to update.zip, there's also this firmware update of 1.8.2 for the M96 and a Booxter version of the OS. Besides the firmware, i came across issues with 4.4 Beta with bluetooth and other stuff.

The first post of this sticky says move update.zip to root and install in About. It appears to be more than just renaming the zip file posted above. Something with a CFGtool?

vv Main Question VV

I'm trying to get on the most updated knowledge on all this info now and general guide / how-to for what I should do first to get M96 updated to work with playstore and newer apps that probably target 4.1 android and above.

Could someone please explain some steps and the firmware / OS configuration that works best? I haven't touched it for 3 years so I've been in the dark with updates and all this info.

Thanks!

Type - M96C Plus | Build - 2015-09-02_14-51_1.7.3_14d2cbe | OS - 4.0.1

bsnick · 08-31-2018, 11:50 AM

As I recall M96C has its own files because of the touchscreen. I don't think the M96/M96+ ones will work.

There were two types of updates:
-update.zip, which as I recall are flashed from within the rom and just update files here and there
-mfgtool firmwares, which overwrite previous installations (or at least the system partition). These are flashed from windows with the cable plugged in.

For the mfgtool firmwares you have your computer turned on, cable plugged in, double-click the exe file (unzip the file first, of course). With your device turned off you hold down some key combination (pgdown + power?) for a few seconds. The light turns on and changes to something like blinking purple). This is a sort of download mode, and at this point if you plug the usb cord in the mfgtool should see the device, although as I recall it doesn't give you the best indication that it's seeing it (no sounds, flashing lights, more like 'drive z:' shows, or something. Windows 8 - 10 might need to started in non-signed driver mode if you have troubles.

I've used the 2015 KitKat on 3 devices without problems, but I seem to have been one of the fortunate few. Maybe the fact I don't use the Onyx apps was why, or maybe it's because I don't make regular use of them.

Fiillu · 09-09-2018, 06:39 PM

Hi
I want to download and flash T68_KK_2017-05-02_20-53_dev_fbc2cc2_user.zip but zip is corrupted. Can you reupload it ?

It will be the best if you can pack it with rar + recovery data .

lumix14 · 10-13-2018, 08:56 AM

Quote:

Originally Posted by bsnick

I have:

M96 & M96+ Kit Kat from: 2015-11-29 & 2017-05-02:
M96_KK_2015-11-29_19-41_dev_6b96172_eng.zip
M96_KK_2017-05-02_19-37_dev_fbc2cc2_user.zip

M96 & M96+ Ice Cream Sandwich from: 2014-09-30 & 2015-11-12:
M96_2014-09-30_21-42_1.6.4_7efa90c_user.7z
M96_ICS_2015-11-12_01-52_dev_ac7be75_user.zip

T68+ (maybe T68 too) Kit Kat from: 2015-11-10 & 2017-05-02:
T68_KK_2017-05-02_20-53_dev_fbc2cc2_user.zip
T68_kk_2015-11-10_01-00_dev_4712b06_eng.zip

T68+ (maybe T68 too) Ice Cream Sandwich from 2017-05-03:
T68_ICS_2017-05-03_05-49_1.8.2_e54efe5_user_1.8.2.zip
T68_ics2015-11-11_00-14_dev_ac7be75_user.zip

These are the Mfgtool2 zip files from the old ereader store (Booxter's). The names were changed because they used to be more generic and I couldn't tell which was KK & which was ICS. Or maybe it was M96 & T68 I added. Or both. I forget. The M96 7zip file also has an update.zip in it. Not sure if it came that way or I did it myself.

Personally I've been using the older KK image without much issue, but I don't use the Onyx apps. I believe some problems were reported with the newer ones for some people so I never bothered to 'upgrade' mine.

These are mega links, but I've never tried sharing via Mega before, so I have no idea if I've done it right. Let me know.

Hi bsnick,

Is there any chance you got a backup of mfgtool version of max carta firmware 4.0.4 ? Thanks a lot

Best regards

Lumix

bsnick · 10-14-2018, 10:45 PM

Sorry, I have the Max2 (kind of regretting it as I never use it) so I have nothing for the earlier Max.

@Fiillu: sorry I didn't respond. I checked the uploaded version against what I have on my computer. I'm afraid the size and md5sum match and I have no problems exploring or unzipping it. I haven't tried flashing it as the previous KK version was working fine for me and I wasn't using the Boox apps anyway.

The zips came direct from Booxter's previous website, so other than the 7zip file (which I assume I did) they're in the 'original packaging' as it were.

lumix14 · 10-15-2018, 10:39 AM

Quote:

Originally Posted by bsnick

Sorry, I have the Max2 (kind of regretting it as I never use it) so I have nothing for the earlier Max.

@Fiillu: sorry I didn't respond. I checked the uploaded version against what I have on my computer. I'm afraid the size and md5sum match and I have no problems exploring or unzipping it. I haven't tried flashing it as the previous KK version was working fine for me and I wasn't using the Boox apps anyway.

The zips came direct from Booxter's previous website, so other than the 7zip file (which I assume I did) they're in the 'original packaging' as it were.

@bsnick, thank you for the reply

07-08-2018, 05:43 AM	#905
notger Enthusiast Posts: 29 Karma: 13724 Join Date: Apr 2015 Device: onyx m96	most recent M96 plus firmware Hi, does anyone have the most recent m96 plus Android. android 4.0 and the experimental android 4.4 oder even higher. I never looked up further developement in the last years. greets Notger

07-21-2018, 06:50 PM	#907
bsnick Zealot Posts: 119 Karma: 42 Join Date: Aug 2015 Device: Onyx M96+, T68+, Max2, YP2, HiSense A2 Pro	I have: M96 & M96+ Kit Kat from: 2015-11-29 & 2017-05-02: M96_KK_2015-11-29_19-41_dev_6b96172_eng.zip M96_KK_2017-05-02_19-37_dev_fbc2cc2_user.zip M96 & M96+ Ice Cream Sandwich from: 2014-09-30 & 2015-11-12: M96_2014-09-30_21-42_1.6.4_7efa90c_user.7z M96_ICS_2015-11-12_01-52_dev_ac7be75_user.zip T68+ (maybe T68 too) Kit Kat from: 2015-11-10 & 2017-05-02: T68_KK_2017-05-02_20-53_dev_fbc2cc2_user.zip T68_kk_2015-11-10_01-00_dev_4712b06_eng.zip T68+ (maybe T68 too) Ice Cream Sandwich from 2017-05-03: T68_ICS_2017-05-03_05-49_1.8.2_e54efe5_user_1.8.2.zip T68_ics2015-11-11_00-14_dev_ac7be75_user.zip These are the Mfgtool2 zip files from the old ereader store (Booxter's). The names were changed because they used to be more generic and I couldn't tell which was KK & which was ICS. Or maybe it was M96 & T68 I added. Or both. I forget. The M96 7zip file also has an update.zip in it. Not sure if it came that way or I did it myself. Personally I've been using the older KK image without much issue, but I don't use the Onyx apps. I believe some problems were reported with the newer ones for some people so I never bothered to 'upgrade' mine. These are mega links, but I've never tried sharing via Mega before, so I have no idea if I've done it right. Let me know. Last edited by bsnick; 07-21-2018 at 08:10 PM.

08-29-2018, 10:45 PM	#909
syntheticLlama Junior Member Posts: 3 Karma: 10 Join Date: Aug 2018 Device: M96	M96 OS + Firm So jumping through pages of various Boox forums I realized there is more than just downloading the: M96_KK_2017-05-02_19-37_dev_fbc2cc2_user.zip and renaming it to update.zip, there's also this firmware update of 1.8.2 for the M96 and a Booxter version of the OS. Besides the firmware, i came across issues with 4.4 Beta with bluetooth and other stuff. The first post of this sticky says move update.zip to root and install in About. It appears to be more than just renaming the zip file posted above. Something with a CFGtool? vv Main Question VV I'm trying to get on the most updated knowledge on all this info now and general guide / how-to for what I should do first to get M96 updated to work with playstore and newer apps that probably target 4.1 android and above. Could someone please explain some steps and the firmware / OS configuration that works best? I haven't touched it for 3 years so I've been in the dark with updates and all this info. Thanks! Type - M96C Plus \| Build - 2015-09-02_14-51_1.7.3_14d2cbe \| OS - 4.0.1

09-09-2018, 06:39 PM	#911
Fiillu Junior Member Posts: 1 Karma: 10 Join Date: Sep 2018 Device: T68	Hi I want to download and flash T68_KK_2017-05-02_20-53_dev_fbc2cc2_user.zip but zip is corrupted. Can you reupload it ? It will be the best if you can pack it with rar + recovery data . Last edited by Fiillu; 09-09-2018 at 06:41 PM. Reason: adding text

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Onyx Boox M96	specialp	Onyx Boox	427	03-14-2016 07:59 AM
Onyx Boox M96 vs M92	machinogodzilla	Onyx Boox	40	12-02-2015 01:04 PM
Onyx Boox T68 Available Soon...	anthony81	Onyx Boox	249	08-12-2015 04:22 PM
T68 Learning Curve	Domo	Onyx Boox	2	06-20-2014 05:47 PM

07-31-2017, 05:07 PM	#902
hubertphava Connoisseur Posts: 69 Karma: 1134558 Join Date: Dec 2012 Location: Italy Device: Cybook Opus, Onyx-Boox Poke5	Pocketbook eh? It seems a good app. Installed on ny nexus-6 is ok but if i try to install on my t68, GPlay says it's non compatible with my software version. Current pocketbook version is (according with Gplay): 2.01 What version have you, Brando? HP

08-04-2017, 03:37 PM	#904
hubertphava Connoisseur Posts: 69 Karma: 1134558 Join Date: Dec 2012 Location: Italy Device: Cybook Opus, Onyx-Boox Poke5	ThankYou BB: found and installed the apk. Now i only have to end the reading of my actual book before "The Great Switch" (TM) ;-) Ah: and i'll start to ssearch some review about powerbook devices (T68 is a good device but i like much more 6" respect 6,8). HP

07-22-2018, 08:58 AM	#908
smmadge Junior Member Posts: 7 Karma: 10 Join Date: Oct 2012 Device: PRS-T1	Thank you very much! This is exactly what i needed Installing in 5 4 3 ..

08-31-2018, 11:50 AM	#910
bsnick Zealot Posts: 119 Karma: 42 Join Date: Aug 2015 Device: Onyx M96+, T68+, Max2, YP2, HiSense A2 Pro	As I recall M96C has its own files because of the touchscreen. I don't think the M96/M96+ ones will work. There were two types of updates: -update.zip, which as I recall are flashed from within the rom and just update files here and there -mfgtool firmwares, which overwrite previous installations (or at least the system partition). These are flashed from windows with the cable plugged in. For the mfgtool firmwares you have your computer turned on, cable plugged in, double-click the exe file (unzip the file first, of course). With your device turned off you hold down some key combination (pgdown + power?) for a few seconds. The light turns on and changes to something like blinking purple). This is a sort of download mode, and at this point if you plug the usb cord in the mfgtool should see the device, although as I recall it doesn't give you the best indication that it's seeing it (no sounds, flashing lights, more like 'drive z:' shows, or something. Windows 8 - 10 might need to started in non-signed driver mode if you have troubles. I've used the 2015 KitKat on 3 devices without problems, but I seem to have been one of the fortunate few. Maybe the fact I don't use the Onyx apps was why, or maybe it's because I don't make regular use of them.

10-14-2018, 10:45 PM	#913
bsnick Zealot Posts: 119 Karma: 42 Join Date: Aug 2015 Device: Onyx M96+, T68+, Max2, YP2, HiSense A2 Pro	Sorry, I have the Max2 (kind of regretting it as I never use it) so I have nothing for the earlier Max. @Fiillu: sorry I didn't respond. I checked the uploaded version against what I have on my computer. I'm afraid the size and md5sum match and I have no problems exploring or unzipping it. I haven't tried flashing it as the previous KK version was working fine for me and I wasn't using the Boox apps anyway. The zips came direct from Booxter's previous website, so other than the 7zip file (which I assume I did) they're in the 'original packaging' as it were.

Advert

Advert