![]() |
#61 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,847
Karma: 22003124
Join Date: Aug 2014
Device: Kobo Forma, Kobo Sage, Kobo Libra 2
|
Not sure, I’ve not seen anything here from someone experiencing issues with KOReader and WiFi but I’m not sure how many of those users also upgraded the built in firmware and then how many of them would have also tried something like this since I think KORreader supports something similar to Calibre companion too
|
![]() |
![]() |
![]() |
#62 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 868
Karma: 2676800
Join Date: Aug 2008
Location: Taranaki - NZ
Device: Kobo Aura H2O, Kobo Forma
|
So from what you wrote, it appears to be failing at:
this section. Basically, for whatever reason, wpa_cli status isn't returning "wpa_state=COMPLETED" within 5 seconds. You could try increasing the timeout to 10 seconds or more, eg: in "nickel-usbms.sh", change Code:
if [ ${WIFI_TIMEOUT} -ge 20 ]; Code:
if [ ${WIFI_TIMEOUT} -ge 40 ]; Also look at this issue, where a similar issue is discussed. |
![]() |
![]() |
Advert | |
|
![]() |
#63 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,847
Karma: 22003124
Join Date: Aug 2014
Device: Kobo Forma, Kobo Sage, Kobo Libra 2
|
Time out increase was no joy, even increasing to 60 however looking through that issue I noted enabling force WiFi on worked. Tried that here and was able to proceed. I didn’t fully test as I’m going to sleep now, but KU was got to the point where it didn’t see a Calibre server (I may not have left it running or something could be causing the issue on my computers end). Just wanted to note that enabling force WiFi seems to have fixed this issue. Obviously a better fix is needed but at least KU is possibly still in a workable state with 4.23 until then.
|
![]() |
![]() |
![]() |
#64 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 868
Karma: 2676800
Join Date: Aug 2008
Location: Taranaki - NZ
Device: Kobo Aura H2O, Kobo Forma
|
Yeah, the current Wifi situation is not ideal.
The new version of KU shouldn't have any of these wifi issues, mainly because I've switched to a browser based UI, so I can let Nickel handle the Wifi stuff. |
![]() |
![]() |
![]() |
#65 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,847
Karma: 22003124
Join Date: Aug 2014
Device: Kobo Forma, Kobo Sage, Kobo Libra 2
|
I don’t know why I was trying to fool myself with that sleep thing. Had some weird hinks on Calibres end (which I think are more related to it not supporting the firmware yet) but after it rejected the first connection a second went through with no issues transferred a book over, ejected, and automatic reconnect and refresh with no errors.
Maybe tomorrow I’ll see if NM supports enabling force WiFi on, then chaining it to the KU NM config. Otherwise I’ll ask Geek if it can be added. As full automation of this is of course preferable. Also thank you for the quick responses |
![]() |
![]() |
Advert | |
|
![]() |
#66 | |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 868
Karma: 2676800
Join Date: Aug 2008
Location: Taranaki - NZ
Device: Kobo Aura H2O, Kobo Forma
|
Quote:
Code:
nickel_setting : force_wifi |
|
![]() |
![]() |
![]() |
#67 | |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,785
Karma: 6990707
Join Date: May 2016
Location: Ontario, Canada
Device: Kobo Mini, Aura Edition 2 v1, Clara HD
|
Quote:
So something like this to enable: `chain_always : nickel_setting : enable : force_wifi` `chain_always : nickel_wifi : disable` ` chain_always : nickel_wifi: enable` (you might need to add a delay in between them if it doesn't work). To disable it again, just change `enable` to `disable` in `nickel_setting`. Speaking of WiFi issues, I've been having trouble with my network not showing up on the list more often than before. It might be something about the scan timeout and the beacon interval on the router, but I haven't taken a look yet. |
|
![]() |
![]() |
![]() |
#68 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
There is currently an open issue on KOReader about Wi-Fi being broke on KOReader (with a similar end result, as far as readily visible error messages go) on 4.23, even with the revamped scripts.
I can't look into it right now, so, more on that next week ![]() |
![]() |
![]() |
![]() |
#69 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 868
Karma: 2676800
Join Date: Aug 2008
Location: Taranaki - NZ
Device: Kobo Aura H2O, Kobo Forma
|
v0.5.0 released!
Hi all.
It's been a very, very long time coming, but I am pleased to announce that Kobo UNCaGED v0.5.0v0.5.1 has finally been released. This is a major overhaul of the software with many changes and new features. You can download the release from GitHub. ------------- From the github release notes: This is a major new release of Kobo UNCaGED. Compared 0.4.x, this release has the following changes and features:
Upgrading from 0.4.x or earlier
------------- Also take note of the readme for updated installation and running instructions. For those who like tweaking, the Web UI is written in vanilla HTML, Javascript and CSS. The CSS and Javascript can be found in the .adds/kobo-uncaged/static directly, and the HTML can be found in the .adds/kobo-uncaged/templates/kuPage.tmpl file. This is a Go template file, but there is very little templating. There is no need to install any web frameworks or tools. You just need a text editor. A huge thanks to @NiLuJe and @geek1011 for their assistance with this release! It wouldn't have been possible without them. Last edited by sherman; 12-13-2020 at 06:31 PM. |
![]() |
![]() |
![]() |
#70 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
Wheee \o/. It's alive!
@sherman: Minor BB code issue with the code tags ![]() |
![]() |
![]() |
![]() |
#71 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 868
Karma: 2676800
Join Date: Aug 2008
Location: Taranaki - NZ
Device: Kobo Aura H2O, Kobo Forma
|
|
![]() |
![]() |
![]() |
#72 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 868
Karma: 2676800
Join Date: Aug 2008
Location: Taranaki - NZ
Device: Kobo Aura H2O, Kobo Forma
|
A couple of issues were discovered in v0.5.0. Please hold off installing until I can release v0.5.1 with fixes.
I'm just awaiting confirmation that my fixes solve an issue that was reported. EDIT: Hotfix released. v0.5.1 now available. Last edited by sherman; 12-13-2020 at 06:27 PM. |
![]() |
![]() |
![]() |
#73 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,847
Karma: 22003124
Join Date: Aug 2014
Device: Kobo Forma, Kobo Sage, Kobo Libra 2
|
This isn't working for me.
I removed the previous uncaged directory entirely, replacing it with the one in 0.5.1 I'm running NM 0.4.1 Initial run did install nickledbus Upon subsequent runs the message "running precautionary library rescan" is displayed briefly, the browser then closes and the message Kobo UNCaGED Finished!" is displayed with a 'continue' button. Pressing the button dismisses the message and nothing further happens. I have wifi on and have confirmed the Kobo can connect, likewise for my Mac running Calibre, they are on the same network. I told calibre to start a wireless device connection. I will note that intentionally having Calibre not running a wireless connection results in the same behavior. I enabled debug, but I can't find any output of this after a run of KU. just a recap of the versions of things Calibre 5.72 NM 0.4.1 KU 0.5.1 Kobo firmware 4.25.15875 |
![]() |
![]() |
![]() |
#74 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
See https://github.com/shermp/Kobo-UNCaG...ment-744029709 for how to get some debug logging action going
![]() |
![]() |
![]() |
![]() |
#75 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 868
Karma: 2676800
Join Date: Aug 2008
Location: Taranaki - NZ
Device: Kobo Aura H2O, Kobo Forma
|
Ok, it sounds like things are going wrong rather early in the startup process.
Your symptoms point to a fairly small portion of the code. After the browser has been opened, and before the config is displayed. I'll definitely need to see the syslog to see what's gone wrong. |
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PDF compressed when sent with Calibre Wireless Connection | zorrodee666 | KOReader | 1 | 03-23-2019 10:50 PM |
connecting Calibre to Calibre without wireless connection | TomSpot | Calibre Companion | 1 | 07-10-2018 06:07 AM |
Wireless connection to calibre. | sorg | Kindle Developer's Corner | 33 | 07-16-2015 11:49 AM |
Calibre Companion and wireless connection | taratears | Calibre Companion | 13 | 03-28-2015 05:32 PM |
Nook Touch/Calibre wireless connection? | tigersfan | Devices | 8 | 01-10-2012 02:51 PM |