![]() |
#46 |
Terraner
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 526
Karma: 4455667
Join Date: Aug 2011
Device: Kobo Libra, Aura One, Kindle Oasis 1 & 2 ...
|
I should have tested more accurately. You can use margins with a higher value greater than 30, but not every value is saved, after closing CoolReader.
These values worked for me (left margin/right margin): 30/30 40/40 50/50 60/60 80/80 100/100 You can make combinations like 30/50. These will also be saved. 35, 45, 55, 65, 70, 90 didn't work for me. When I mixed a working value with a non working (e.g. 30/75), I was not able to start CoolReader again, even after correcting the value in the cr3.ini manually. |
![]() |
![]() |
![]() |
#47 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
Another issue - the font size used for file names in the internal file browser and in the recent book list.
The font size currently is huge. For me, impossible to read. I need 3 times smaller letters to be able to read them comfortably. For comparison, for book text I am using Amasis size=32 which corresponds to size=20 in the native Kobo reader or in CR on PRS-T2. If only the size of letters were the same or even a bit smaller - that would be perfect. Besides, with smaller letters most of file names would fit on the screen without the need for horizontal scrolling. Because probably there are people who want larger letters, and because a different size is perhaps needed for Aura HD than for other devices, clearly a way to choose the size of that font is needed. Either in settings or at least in cr3.ini file |
![]() |
![]() |
Advert | |
|
![]() |
#48 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
trekk
Better and better. I was lucky I did not run so far into such values preventing CR to start. That might explain why some other people can not start CR sometimes until re-installing it. But still, if you correct it in cr3.ini and it is not enough, then what? Clearing the cache? Because clearly after that the remaining files are the same as after re-installing. Unless the font - perhaps it is not the same which font is used? And perhaps its size? I am using custom added Amasis30 @ 32 (corresponds to regular size 20) And which book is opened on start and at which position and with what CR style options. Yes, there are some other factors that go away after re-installing. Or after removing cr3hist.bmk and cache files. Last edited by parkher; 09-25-2013 at 02:59 PM. |
![]() |
![]() |
![]() |
#49 | |
Terraner
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 526
Karma: 4455667
Join Date: Aug 2011
Device: Kobo Libra, Aura One, Kindle Oasis 1 & 2 ...
|
Quote:
BTW I didn't loose my fonts, nor my settings. |
|
![]() |
![]() |
![]() |
#50 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
Depends on how you reinstalled.
It is recommended to delete the whole KoboLauncher folder before reinstalling. But I think reinstalling was not needed: it should be enough to delete cache and cr3hist.bmk and perhaps cr3.ini too. Actually, we could determine which of those exactly needs to be deleted by trying one at a time. |
![]() |
![]() |
Advert | |
|
![]() |
#51 | |
Terraner
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 526
Karma: 4455667
Join Date: Aug 2011
Device: Kobo Libra, Aura One, Kindle Oasis 1 & 2 ...
|
Quote:
![]() I deleted cache at first - CR won't start, then cr3hist.bkm - CR won't start, then cr3.ini, CR still won't start. I reinstalled via KoboRoot.tgz and everything was good again... |
|
![]() |
![]() |
![]() |
#52 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
This is very strange.
So what you could do next: to save cr3hist.bkm, cr3.ini and cache on your PC and then deliberately cause that problem and try to replace back one-by-one. But probably will not help either. Backup the whole installation. The whole KoboLauncher directory? And then replace back bit-by-bit. Or just compare what changed. Nothing likely changed outside the cr3 directory... Interesting - when you install cr3 - is there an initial cr3.ini generated or is it created only when you run CR? I assume - only when you run CR. Therefore it is a mystery what happened. I don't think changes are made directly in cr3 elf itself. But it can be checked. Because we are running out of options. Maybe access rights of some crucial file were somehow modified? I mean - file permissions. Last edited by parkher; 09-25-2013 at 04:06 PM. |
![]() |
![]() |
![]() |
#53 | ||
Terraner
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 526
Karma: 4455667
Join Date: Aug 2011
Device: Kobo Libra, Aura One, Kindle Oasis 1 & 2 ...
|
Quote:
Quote:
I hope we can solve this mystery. But not today. It' time for some "Breaking Bad" and some sleep afterwards. ![]() |
||
![]() |
![]() |
![]() |
#54 | |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
Quote:
![]() Last edited by parkher; 09-25-2013 at 04:26 PM. |
|
![]() |
![]() |
![]() |
#55 |
Addict
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 251
Karma: 214890
Join Date: Sep 2006
Device: none
|
|
![]() |
![]() |
![]() |
#56 | |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
Quote:
If I write larger values directly to cr3.ini they probably would be reset when CR3 is launched. But maybe not? Maybe worth trying. In portrait, 80 is pretty good, on Aura HD it gives me about 8 mm + 87 mm + 8 mm. 87 mm text width is similar to what you find in most mass market paperbacks and 8 mm margin is comfortable enough. Going below 7 mm is not pleasant to me. In landscape I would need margins to increase the text length further, let's say from 90 mm - so the required margins are up to 250 to ensure there is no big gap between the text width in portrait and landscape. |
|
![]() |
![]() |
![]() |
#57 | |
Addict
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 251
Karma: 214890
Join Date: Sep 2006
Device: none
|
Quote:
They shouldn't. The engine checks if setting value is in predefined set when it reads ini file. If it is not, it uses default value. If you will specify in the ini file one of above values they should work. The GUI limitation just doesn't allow you to enter the value it doesn't validate values stored in the ini file. |
|
![]() |
![]() |
![]() |
#58 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
Ok, thanks
But why there are those specific sets? Actually I tried values = 75, they gave me 7 mm margin and 88 mm text - the seemed to work, at least those values were allowed to be set and they were working. Previously I was using = 64 - also was working. OFF TOPIC: To English speakers: I just invented this English sentence, is it correct? No, do go to do so to Jo! I guess, there are a couple of dubious things, No, do go do it to Jo! would be safer but where is the fun in that? Last edited by parkher; 09-26-2013 at 12:49 PM. |
![]() |
![]() |
![]() |
#59 | |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 414
Karma: 216544
Join Date: Feb 2012
Device: Kobo Clara HD, Moaan Inkpalm 5.
|
Quote:
No, do go do it to Jo! You can not "go do...", to be coorect you should say "go and do..." |
|
![]() |
![]() |
![]() |
#60 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 467
Karma: 369018
Join Date: Nov 2010
Device: BL Alita/Mimas/Ares, OB Note2/Note, KA One/H2O/HD, S PRS T2/T1, PB 902
|
I think you can: "go do" is a shortcut for "go, do" as in
Go, do it! Go do it! is usually used instead. But for my purposes much better is "go to do" Last edited by parkher; 09-26-2013 at 12:47 PM. |
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PRS-T1 sony prs-t1 Cool Reader vs FBReader vs Reader | killermiller | Sony Reader | 1 | 10-08-2012 03:06 PM |
Need to Help for Cool Reader | anu_09 | Android Developer's Corner | 1 | 11-03-2011 05:56 AM |
Cool Reader | emt | Android Devices | 11 | 05-18-2011 02:18 PM |
Cool reader and E-Book reader differences? | PKFFW | OpenInkpot | 9 | 11-22-2010 05:52 PM |
Ended Cool-er e reader | BenjaminJames | Flea Market | 1 | 01-07-2010 05:36 PM |