[Alpha] Kobo-UNCaGED - Calibre wireless connection - Page 4

NiLuJe · 02-21-2020, 04:54 PM

(Spent a good ten second looking for the emote button to add a :+1: before realizing this wasn't GH

).

sherman · 03-06-2020, 04:21 PM

Hi all,

Just released a minor update to hopefully improve the shell scripts, as previously discussed.

I've also updated the metadata code a bit. It now only restarts KU/reruns USBMS if new books are added. Otherwise metadata is updated during the initial run.

As always, the release can be found at GitHub

Up next will be to figure out how I'm going to support Kobo's new-fangled series feature in FW 4.20

JSWolf · 03-13-2020, 11:12 AM

Quote:

Originally Posted by sherman

Hi all,

Just released a minor update to hopefully improve the shell scripts, as previously discussed.

I've also updated the metadata code a bit. It now only restarts KU/reruns USBMS if new books are added. Otherwise metadata is updated during the initial run.

As always, the release can be found at GitHub

Up next will be to figure out how I'm going to support Kobo's new-fangled series feature in FW 4.20

Have a look at the code for Kobo Utilities or one of the Kobo Drivers as they both support the new 4.20 series tab.

sherman · 03-13-2020, 04:11 PM

Quote:

Originally Posted by JSWolf

Have a look at the code for Kobo Utilities or one of the Kobo Drivers as they both support the new 4.20 series tab.

I generally know how it needs to be done, it's just the exact specifics on how I'm going to integrate it into my current codebase that needs to be determined.

And yes, I will probably shamelessly 'borrow' @geek1011's SQL implementation

JSWolf · 03-13-2020, 06:26 PM

Quote:

Originally Posted by sherman

I generally know how it needs to be done, it's just the exact specifics on how I'm going to integrate it into my current codebase that needs to be determined.

And yes, I will probably shamelessly 'borrow' @geek1011's SQL implementation

I would go with Davidfor's implementation as that's what Calibre is using (just in case there is a difference).

sherman · 03-13-2020, 06:35 PM

They're basically equivalent, so yeah.

Basically, the issue is deciding what SeriesID to use. I think everyone's settled on the Kobo generated SeriesID if a user has a Kobo downloaded book in that series on their device, or the SeriesName otherwise.

As I said, a matter of integrating the logic/SQL in my own code. I'll probably get around to it when I can be bothered to install FW 4.20.x on my devices...

JSWolf · 03-13-2020, 06:46 PM

Quote:

Originally Posted by sherman

They're basically equivalent, so yeah.

Basically, the issue is deciding what SeriesID to use. I think everyone's settled on the Kobo generated SeriesID if a user has a Kobo downloaded book in that series on their device, or the SeriesName otherwise.

As I said, a matter of integrating the logic/SQL in my own code. I'll probably get around to it when I can be bothered to install FW 4.20.x on my devices...

I hope it's not too difficult to implement the series stuff.

sherman · 03-13-2020, 06:54 PM

Not difficult, just a bit annoying. Also, since I'm doing it on device, my implementation needs to be relatively efficient for performance and battery reasons.

sherman · 03-14-2020, 10:19 PM

For those interested, I have an initial implementation of the new Series stuff "working".

On the downside, somewhere along the way I've introduced database corruption issues, which is Not Good.

So there won't be any sort of release until that issue is resolved.

church mouse · 03-15-2020, 03:50 AM

sherman, I just want to apologise for the hassle I caused with my USB error thing (caused by my connecting the USB immediately after using the application). Your application is now my ''go to'' method for transferring my books.

Many thanks.

sherman · 03-15-2020, 04:06 AM

Quote:

Originally Posted by church mouse

sherman, I just want to apologise for the hassle I caused with my USB error thing (caused by my connecting the USB immediately after using the application). Your application is now my ''go to'' method for transferring my books.

Many thanks.

No hassle at all. It was a problem that needed fixing, and made the whole thing just a bit more robust.

I'm glad it's working for you!

zapras@yahoo.com · 04-20-2020, 11:33 PM

Is it possible to manually add an ip address to connect to? I want to expose this to the Internet.

sherman · 04-20-2020, 11:48 PM

Not currently. It's an option I've thought about though.

It's not really suitable for use over the internet though, as you have to basically need to have access to both the Kobo, and Calibre GUI simultaneously to use this.

Also, I don't know how it will perform. The protocol was designed to be used on a local network.

Also, security. There is no encryption on the connection at all, so you would be exposing the connection to the world.

In summary, I really would not recommend exposing this to the internet.

MGlitch · 08-13-2020, 01:41 AM

Since upgrading to 4.23 I have not been able to get this mod to work. I'm using NM, and while that end of it seems to work (KU still enables a fake USB connection, then proceeds to hit connect) it tries to enable wifi and fails.

The message "wps_supplicant failed to connect" is briefly displayed. I have noticed that wifi tends to disable quicker in 4.23 with FTP from NM. Not sure if that's also the issue here.

Running NM 0.3.2 and KU 0.4.1-11 and firmware 4.23.15505

sherman · 08-13-2020, 01:55 AM

Hmm. I haven't actually tried on 4.23 yet. I've been busy trying to get my NickelDBus mod (forthcoming) out the door, and haven't done anything with KU for quite a while.

The next version of KU shouldn't have this sort of issue, but I want it to use the afore mentioned NickelDBus mod, so could be a wee while yet.

Most of the WiFi connecting logic was adapted from KOreader, I'm not sure if they've run into any issues yet?

03-06-2020, 04:21 PM	#47
sherman Guru Posts: 869 Karma: 2676800 Join Date: Aug 2008 Location: Taranaki - NZ Device: Kobo Aura H2O, Kobo Forma	v0.4.1 released Hi all, Just released a minor update to hopefully improve the shell scripts, as previously discussed. I've also updated the metadata code a bit. It now only restarts KU/reruns USBMS if new books are added. Otherwise metadata is updated during the initial run. As always, the release can be found at GitHub Up next will be to figure out how I'm going to support Kobo's new-fangled series feature in FW 4.20

08-13-2020, 01:41 AM	#59
MGlitch Wizard Posts: 2,851 Karma: 22003124 Join Date: Aug 2014 Device: Kobo Forma, Kobo Sage, Kobo Libra 2	Since upgrading to 4.23 I have not been able to get this mod to work. I'm using NM, and while that end of it seems to work (KU still enables a fake USB connection, then proceeds to hit connect) it tries to enable wifi and fails. The message "wps_supplicant failed to connect" is briefly displayed. I have noticed that wifi tends to disable quicker in 4.23 with FTP from NM. Not sure if that's also the issue here. Running NM 0.3.2 and KU 0.4.1-11 and firmware 4.23.15505 Last edited by MGlitch; 08-13-2020 at 01:45 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PDF compressed when sent with Calibre Wireless Connection	zorrodee666	KOReader	1	03-23-2019 10:50 PM
connecting Calibre to Calibre without wireless connection	TomSpot	Calibre Companion	1	07-10-2018 06:07 AM
Wireless connection to calibre.	sorg	Kindle Developer's Corner	33	07-16-2015 11:49 AM
Calibre Companion and wireless connection	taratears	Calibre Companion	13	03-28-2015 05:32 PM
Nook Touch/Calibre wireless connection?	tigersfan	Devices	8	01-10-2012 02:51 PM

02-21-2020, 04:54 PM	#46
NiLuJe BLAM! Posts: 13,497 Karma: 26047188 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	(Spent a good ten second looking for the emote button to add a :+1: before realizing this wasn't GH ).

03-13-2020, 06:35 PM	#51
sherman Guru Posts: 869 Karma: 2676800 Join Date: Aug 2008 Location: Taranaki - NZ Device: Kobo Aura H2O, Kobo Forma	They're basically equivalent, so yeah. Basically, the issue is deciding what SeriesID to use. I think everyone's settled on the Kobo generated SeriesID if a user has a Kobo downloaded book in that series on their device, or the SeriesName otherwise. As I said, a matter of integrating the logic/SQL in my own code. I'll probably get around to it when I can be bothered to install FW 4.20.x on my devices...

03-13-2020, 06:54 PM	#53
sherman Guru Posts: 869 Karma: 2676800 Join Date: Aug 2008 Location: Taranaki - NZ Device: Kobo Aura H2O, Kobo Forma	Not difficult, just a bit annoying. Also, since I'm doing it on device, my implementation needs to be relatively efficient for performance and battery reasons.

03-14-2020, 10:19 PM	#54
sherman Guru Posts: 869 Karma: 2676800 Join Date: Aug 2008 Location: Taranaki - NZ Device: Kobo Aura H2O, Kobo Forma	For those interested, I have an initial implementation of the new Series stuff "working". On the downside, somewhere along the way I've introduced database corruption issues, which is Not Good. So there won't be any sort of release until that issue is resolved.

03-15-2020, 03:50 AM	#55
church mouse Evangelist Posts: 484 Karma: 5277078 Join Date: Oct 2009 Location: UK Device: Kobo Clara HD, Boox Poke 2, PocketBook Verse Pro (634)	sherman, I just want to apologise for the hassle I caused with my USB error thing (caused by my connecting the USB immediately after using the application). Your application is now my ''go to'' method for transferring my books. Many thanks.

04-20-2020, 11:33 PM	#57
zapras@yahoo.com Junior Member Posts: 1 Karma: 10 Join Date: Apr 2020 Device: Kobo	Is it possible to manually add an ip address to connect to? I want to expose this to the Internet.

04-20-2020, 11:48 PM	#58
sherman Guru Posts: 869 Karma: 2676800 Join Date: Aug 2008 Location: Taranaki - NZ Device: Kobo Aura H2O, Kobo Forma	Not currently. It's an option I've thought about though. It's not really suitable for use over the internet though, as you have to basically need to have access to both the Kobo, and Calibre GUI simultaneously to use this. Also, I don't know how it will perform. The protocol was designed to be used on a local network. Also, security. There is no encryption on the connection at all, so you would be exposing the connection to the world. In summary, I really would not recommend exposing this to the internet.

08-13-2020, 01:55 AM	#60
sherman Guru Posts: 869 Karma: 2676800 Join Date: Aug 2008 Location: Taranaki - NZ Device: Kobo Aura H2O, Kobo Forma	Hmm. I haven't actually tried on 4.23 yet. I've been busy trying to get my NickelDBus mod (forthcoming) out the door, and haven't done anything with KU for quite a while. The next version of KU shouldn't have this sort of issue, but I want it to use the afore mentioned NickelDBus mod, so could be a wee while yet. Most of the WiFi connecting logic was adapted from KOreader, I'm not sure if they've run into any issues yet?

Advert

Advert