[GUI Plugin] Kobo Utilities - Page 3

davidfor · 06-11-2013, 08:34 AM

Quote:

Originally Posted by BobC

Glo with firmware 2.40
Calibre 0.9.34
Extended Touch/Glo driver 1.42
Kobo Utilities 1.0.0

I have followed the config instructions for Utilities and have a custom column set up named "percentread" of type "Integer". This is referenced in the Utility setup (as #percentread).

I connect my Glo and use the Utility menu to "Store" the current bookmarks of a single book I am currently reading which has a single annotation.

Utilities reports one book, no bookmarks found and the Percent Read column in my Library is not updated with any value.

Do I need to make any config changes to the Extended Driver ?

Thoughts would be appreciated as to what I am doing wrong.

Sorry, I knew there was something I forgot to mention or fix. This is only retrieving the reading location for epubs. For this, I ignore kepubs because they get synced to the Kobo server. But, of course I forgot about the extended driver. Well, it didn't exist when I initially wrote this, but I haven't gotten around to adding them. It shouldn't be to hard, so I will do that in the next few days.

Also, I have been inconsistent with my terminology. I keep using "bookmark", because I think of using a bookmark in a paperback to remember where I am up to*. Kobo allows multiple bookmarks. This function is only looking at the current reading position. i.e. The place the book will open to.

Annotations and the tap-the-top-corner bookmarks aren't handled by this. The two annotation options in the plugin do. But, the Annotations plugin does a much better job of handling them. I plan to write the code so that it can read the Kobo devices. I have done enough to know it is possible, but need to return to it.

* For a long time I used train tickets for bookmarks. Every now and then I get a book out and find a fading ticket. I can then see when I last read it.

theducks · 06-11-2013, 09:17 AM

Quote:

Originally Posted by davidfor

Sorry,
* For a long time I used train tickets for bookmarks. Every now and then I get a book out and find a fading ticket. I can then see when I last read it.

You have Train Tickets.

We switched to the Clipper Card

a while back. You now 'Tag on' (and 'Tag Off' when required) when you ride Transit. No more free(ish) bookmarks (some of my books have those same kind

still in place )

davidfor · 06-11-2013, 09:37 AM

Quote:

Originally Posted by theducks

You have Train Tickets.

We switched to the Clipper Card

a while back. You now 'Tag on' (and 'Tag Off' when required) when you ride Transit. No more free(ish) bookmarks (some of my books have those same kind

still in place )

We're a bit backward down under. The current tickets have a magnetic stripe. They are just introducing some sort of swipe card, but not yet on the line I use.

theducks · 06-11-2013, 09:48 AM

Quote:

Originally Posted by davidfor

We're a bit backward down under. The current tickets have a magnetic stripe. They are just introducing some sort of swipe card, but not yet on the line I use.

Clipper is a 'contactless ststem' (RFID?). You don't even have to remove it from your wallet in many cases, just hold it over the 'Pad' at the gate.

The Guard has a hand-held that can validate that there is a active 'Tag on' for that transit mode registered in the Clipper system.
1 card to rule them all now in the Bay Area

BobC · 06-11-2013, 11:20 AM

Quote:

Originally Posted by davidfor

Sorry, I knew there was something I forgot to mention or fix. This is only retrieving the reading location for epubs. For this, I ignore kepubs because they get synced to the Kobo server. But, of course I forgot about the extended driver. Well, it didn't exist when I initially wrote this, but I haven't gotten around to adding them. It shouldn't be to hard, so I will do that in the next few days.

Also, I have been inconsistent with my terminology. I keep using "bookmark", because I think of using a bookmark in a paperback to remember where I am up to*. Kobo allows multiple bookmarks. This function is only looking at the current reading position. i.e. The place the book will open to.

Annotations and the tap-the-top-corner bookmarks aren't handled by this. The two annotation options in the plugin do. But, the Annotations plugin does a much better job of handling them. I plan to write the code so that it can read the Kobo devices. I have done enough to know it is possible, but need to return to it.
.

Thanks for explaining that - I was pretty sure I was following the instructions - now I understand why I wasn't getting the expected results.

BobC

Terisa de morgan · 06-11-2013, 11:55 AM

Quote:

Originally Posted by davidfor

Sorry, I knew there was something I forgot to mention or fix. This is only retrieving the reading location for epubs. For this, I ignore kepubs because they get synced to the Kobo server. But, of course I forgot about the extended driver. Well, it didn't exist when I initially wrote this, but I haven't gotten around to adding them. It shouldn't be to hard, so I will do that in the next few days.

Glad to read this

speakingtohe · 06-11-2013, 12:25 PM

Is there any way that the restore bookmark function could be made to run from the device screens? Or a custom column made on the library screen to display the Im_reading and Read status?

I have a lot of books on my Aura and thought I would bite the bullet and do them all. 4 hours and it was still running with calibre not responding.

I know this is a lot to ask as most people only have one or two books that they are reading/finished, but it sure would be nice for me

Helen

taming · 06-11-2013, 08:04 PM

Quote:

Originally Posted by BobC

Thanks for explaining that - I was pretty sure I was following the instructions - now I understand why I wasn't getting the expected results. BobC

You are not the only one.

davidfor · 06-11-2013, 10:08 PM

Quote:

Originally Posted by BobC

Thanks for explaining that - I was pretty sure I was following the instructions - now I understand why I wasn't getting the expected results.

Quote:

Originally Posted by Terisa de morgan

Glad to read this

Quote:

Originally Posted by taming

You are not the only one.

You will all be happy to know it was only slightly harder than I expected. It needs a little more testing. I have attached it to this post for anyone to try.

This also has the first cut of adding a database trigger for dismissing unwanted tiles. Same function as before, but some extra options that mean the trigger is generated from the options and installed. It doesn't have the options that taming wants to hid the newly added books, but that is mainly because I need to think about what to present. I am also a little less comfortable about doing this. If I get it wrong, then you might end up with an empty home screen. Though I'm sure someone would think that was a good idea.

PeterT · 06-11-2013, 10:37 PM

Does the trigger get installed automatically when I select options to dismiss? While yes, I do see Trigger options in the new plugin, they seem to be related to reading status.

davidfor · 06-11-2013, 10:46 PM

That's terrible. I copied code and forgot to change the name. I don't even think I read it while I was testing. The checkbox should read "Change database trigger". I also need to add the tooltips.

These options will not get saved as I want it to be a deliberate decision each time.

And I didn't actually answer the question.

To install the trigger, you have to check the "Change reading status/Change database trigger" checkbox and select the "Create trigger" radio button. The trigger is generated using the tile types selected in the top section (soon to be renamed "Tile types").

If you don't select the trigger options, it just dismisses the current tiles as per the selection.

PeterT · 06-11-2013, 11:00 PM

What happens if I have a trigger set and then change options. Will the existing trigger be removed and a new one added?

davidfor · 06-11-2013, 11:39 PM

Yes, that is exactly what it does.

eXistenZ · 06-12-2013, 06:30 AM

Hi there!

First of all thank you for this great plug-in.

I have a big big problem, every time i use any of the functions of the plug-in Calibre crashes. Tried installing the version in the first post, and now the 1.0.1 Beta (which is even worse, because it crashes also selecting the simple Help, or About Plug-in).

My configuration is:
OS: mac Os X 10.8.4
Calibre: 0.9.34
Kobo Glo with 2.6.1 firmware

Attached a txt containing the entire crash report

davidfor · 06-12-2013, 09:20 AM

I have to admit that I don't know what is going on.

Is the crash when you select the option, or when you press OK on the dialog to start it? Is it every function? The "Copy annotations" and "Device database check" are a little different in how they start. Do they work?

I'll try it on a Mac at work tomorrow.

06-11-2013, 10:46 PM	#41
davidfor Grand Sorcerer Posts: 24,905 Karma: 47303822 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	That's terrible. I copied code and forgot to change the name. I don't even think I read it while I was testing. The checkbox should read "Change database trigger". I also need to add the tooltips. These options will not get saved as I want it to be a deliberate decision each time. And I didn't actually answer the question. To install the trigger, you have to check the "Change reading status/Change database trigger" checkbox and select the "Create trigger" radio button. The trigger is generated using the tile types selected in the top section (soon to be renamed "Tile types"). If you don't select the trigger options, it just dismisses the current tiles as per the selection. Last edited by davidfor; 06-11-2013 at 11:00 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GUI Plugin] Manga plugin	mastertea	Plugins	6	01-06-2022 03:43 AM
[GUI Plugin] Save Virtual Libraries To Column (GUI)	chaley	Plugins	14	04-04-2021 06:25 AM
Kobo Utilities Plugin Question	nikev	Kobo Reader	10	09-26-2018 12:55 AM
[GUI Plugin] Plugin Updater Deprecated	kiwidude	Plugins	159	06-19-2011 01:27 PM

06-11-2013, 12:25 PM	#37
speakingtohe Wizard Posts: 4,812 Karma: 26912940 Join Date: Apr 2010 Device: sony PRS-T1 and T3, Kobo Mini and Aura HD, Tablet	Is there any way that the restore bookmark function could be made to run from the device screens? Or a custom column made on the library screen to display the Im_reading and Read status? I have a lot of books on my Aura and thought I would bite the bullet and do them all. 4 hours and it was still running with calibre not responding. I know this is a lot to ask as most people only have one or two books that they are reading/finished, but it sure would be nice for me Helen

06-11-2013, 10:37 PM	#40
PeterT Grand Sorcerer Posts: 12,739 Karma: 75000000 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	Does the trigger get installed automatically when I select options to dismiss? While yes, I do see Trigger options in the new plugin, they seem to be related to reading status.

06-11-2013, 11:00 PM	#42
PeterT Grand Sorcerer Posts: 12,739 Karma: 75000000 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	What happens if I have a trigger set and then change options. Will the existing trigger be removed and a new one added?

06-11-2013, 11:39 PM	#43
davidfor Grand Sorcerer Posts: 24,905 Karma: 47303822 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	Yes, that is exactly what it does.

06-12-2013, 09:20 AM	#45
davidfor Grand Sorcerer Posts: 24,905 Karma: 47303822 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	I have to admit that I don't know what is going on. Is the crash when you select the option, or when you press OK on the dialog to start it? Is it every function? The "Copy annotations" and "Device database check" are a little different in how they start. Do they work? I'll try it on a Mac at work tomorrow.

Advert

Advert