M96 + T68. Updates and more ... - Page 2

joblack · 07-02-2014, 04:30 PM

Quote:

Originally Posted by Booxtor

You could try my solution from this post https://www.mobileread.com/forums/sho...4&postcount=89
I just tried it an it worked for me.

If you need detailed description just let me know

Thanks but this way it didn't work with the Google Appstore. However it did work with

1. rooting the device
2. Install Safari to Go manually (http://blog.safaribooksonline.com/20...dle-fire-nook/ )

It's f**king great to have all the E-Books from Safari on the Onyx M96.

I've attached a quick screenshot. Unfortunately it doesn't really represent the crystal clear quality of the e-books but you'll get the point.

Kazuma · 07-03-2014, 01:12 AM

I've found another strange bug.
The selection mode makes the screen rotate 180 degrees.
Hmm

illumilore · 07-03-2014, 04:03 AM

Quote:

Originally Posted by Booxtor

CoolReader will be probably removed from standard update because it is difficult to maintain. I will post a link, where you can download current CoolReader Onyx version as an application if you like it.

When I tried updating cool reader through the play store, it didn't seem to like that and said that the package was not signed correctly. I think because it was already installed on my t68, even though it does not show in the apps menu. Will it being removed by default fix this?

Also, will upgrading to the version here allow give the user root access?

perfilad0 · 07-03-2014, 06:06 AM

After installing the update, I have problems with crop.

In OnyxReader autocrop works fine, but "Selection " gives problems. I can not adjust the margins with the stylus.

In the NeoReader "Selection " does not do anything, clicking the menu disappears, and "autocrop" does not work fine, from 2-5 does not change, and 5-6 is enormous change

fraylocus · 07-03-2014, 06:22 AM

Given the nature of this reader, one leg would be necessary tool to backup our system, if by accident the damaged or non-functional desconfiguramos to do.

The firmware output is functional, but it is immature. Major upgrading is needed.
Something is urgent to improve the management of the SD card, which is removed when we connect the reader to the PC and the beginning of the boot, takes a long time to access the content files.
In browsing through folders no details of dates.

Detailed instructions for dictionary management, supplies, etc. are needed.

A greeting -.

Katsunami · 07-03-2014, 06:26 AM

Quote:

Originally Posted by Booxtor

AFAIK In the Artatech version they have some additional pre-installed apps like bookshop (for Polish ebooks) and English + Polish Ivona TTS. After update with our software those apps could be gone, so I guess the could have not permited installation of our updates in their versions (like it has been done in Russian versions of T68 and M96). You can try it though.

Are you actively trying to prevent people of installing this update? What happens if one would try it, and it fails? Can the default firmware be re-installed in some way?

If this T68 update provides English, and removes pre-installed apps and Polish stuff such as the bookstore and Polish TTS then that would actually be an advantage. (I'm not Polish, so it's of no use to me.)

Booxtor · 07-03-2014, 07:57 AM

Quote:

Originally Posted by perfilad0

After installing the update, I have problems with crop.

In OnyxReader autocrop works fine, but "Selection " gives problems. I can not adjust the margins with the stylus.

In the NeoReader "Selection " does not do anything, clicking the menu disappears, and "autocrop" does not work fine, from 2-5 does not change, and 5-6 is enormous change

when you click selection zoom you can touch the screen and then drag.
In dragging, there is a highlight region. When you release finger, it just zoom the selection region

In later version we will add a message how to use this tool, after click on selective zoom..

Booxtor · 07-03-2014, 07:59 AM

Quote:

Originally Posted by Katsunami

Are you actively trying to prevent people of installing this update? What happens if one would try it, and it fails? Can the default firmware be re-installed in some way?

If this T68 update provides English, and removes pre-installed apps and Polish stuff such as the bookstore and Polish TTS then that would actually be an advantage. (I'm not Polish, so it's of no use to me.)

I am not preventing, just warning it could possibly not work (installation will be aborted with an error message). It will not cause any damage or changes on Lynx.

Sweetpea · 07-03-2014, 09:04 AM

Quote:

Originally Posted by Booxtor

I am not preventing, just warning it could possibly not work (installation will be aborted with an error message). It will not cause any damage or changes on Lynx.

Can you tell how to find out which version I have?

Katsunami · 07-03-2014, 09:13 AM

This is a bit unclear:

"It could possibly not work" -> This means there is also a chance that it WILL work.
"Installation will be aborted with an error message" -> This means it is certain that it won't work.

Do you mean that if it DOESN'T work, the installation will just be aborted, and nothing will be changed, and if it DOES work, the installation will proceed and you'll get a working reader with this non-Lynx firmware?

Booxtor · 07-03-2014, 09:41 AM

Quote:

Originally Posted by Sweetpea

Can you tell how to find out which version I have?

If you bought your T68 in Artatech store, you will have a Lynx. You can also watch your original box. It should be labelled as Lynx. In our store we don't sell Lynx version.

Katsunami · 07-03-2014, 09:48 AM

Which is the Artatech Store, and which is "our store" please?

Dutch stores are importing this reader, so they're getting it at different places, and we probably can't find out which places those are. IF the original box does NOT state Lynx, then we can install the forthcoming T68 update mentioned above?

Booxtor · 07-03-2014, 09:49 AM

Quote:

Originally Posted by Katsunami

This is a bit unclear:

"It could possibly not work" -> This means there is also a chance that it WILL work.
"Installation will be aborted with an error message" -> This means it is certain that it won't work.

Do you mean that if it DOESN'T work, the installation will just be aborted, and nothing will be changed, and if it DOES work, the installation will proceed and you'll get a working reader with this non-Lynx firmware?

I don't have a Lynx and therefore cannot test it. What I know for sure, some customers from Russia tried to install our update to their version of T68 and it did not work. There are three versions on the market: our T68, Lynx and Russian T76 Nefertiti. When installation fails by Nefertiti (installation aborted with error message ) I just can assume, that it will not work for Lynx users too.

Katsunami · 07-03-2014, 09:51 AM

Which is "our version"?

Lynx == Artatech version with Polish store and TTS
T76 == Russian version
All other T68 == "Official Boox International" version

Is it like this?

Billi · 07-03-2014, 10:36 AM

Katsunami, if you want to buy at your Dutch store - why don't you ask them? They should know much better what they are selling than Booxtor.

And according to the description on their website it could be the Artatech version. They mention Lynx somewhere and they mention the Ivona tts.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Onyx Boox M96	specialp	Onyx Boox	427	03-14-2016 07:59 AM
Onyx Boox M96 vs M92	machinogodzilla	Onyx Boox	40	12-02-2015 01:04 PM
Onyx Boox T68 Available Soon...	anthony81	Onyx Boox	249	08-12-2015 04:22 PM
T68 Learning Curve	Domo	Onyx Boox	2	06-20-2014 05:47 PM

07-03-2014, 01:12 AM	#17
Kazuma Member Posts: 11 Karma: 10 Join Date: Apr 2012 Location: Tokyo, Japan Device: Onyx Boox M92, Kindle touch, Kindle DX, Kindle Keyboard	I've found another strange bug. The selection mode makes the screen rotate 180 degrees. Hmm

07-03-2014, 06:06 AM	#19
perfilad0 Junior Member Posts: 6 Karma: 10 Join Date: Jul 2014 Device: Onix Boox M96	After installing the update, I have problems with crop. In OnyxReader autocrop works fine, but "Selection " gives problems. I can not adjust the margins with the stylus. In the NeoReader "Selection " does not do anything, clicking the menu disappears, and "autocrop" does not work fine, from 2-5 does not change, and 5-6 is enormous change

07-03-2014, 06:22 AM	#20
fraylocus Groupie Posts: 164 Karma: 10020 Join Date: Mar 2012 Device: Onyx Boox M92, Onyx Boox T68	Given the nature of this reader, one leg would be necessary tool to backup our system, if by accident the damaged or non-functional desconfiguramos to do. The firmware output is functional, but it is immature. Major upgrading is needed. Something is urgent to improve the management of the SD card, which is removed when we connect the reader to the PC and the beginning of the boot, takes a long time to access the content files. In browsing through folders no details of dates. Detailed instructions for dictionary management, supplies, etc. are needed. A greeting -.

07-03-2014, 09:13 AM	#25
Katsunami Grand Sorcerer Posts: 6,111 Karma: 34000001 Join Date: Mar 2008 Device: KPW1, KA1	This is a bit unclear: "It could possibly not work" -> This means there is also a chance that it WILL work. "Installation will be aborted with an error message" -> This means it is certain that it won't work. Do you mean that if it DOESN'T work, the installation will just be aborted, and nothing will be changed, and if it DOES work, the installation will proceed and you'll get a working reader with this non-Lynx firmware?

07-03-2014, 09:48 AM	#27
Katsunami Grand Sorcerer Posts: 6,111 Karma: 34000001 Join Date: Mar 2008 Device: KPW1, KA1	Which is the Artatech Store, and which is "our store" please? Dutch stores are importing this reader, so they're getting it at different places, and we probably can't find out which places those are. IF the original box does NOT state Lynx, then we can install the forthcoming T68 update mentioned above?

07-03-2014, 09:51 AM	#29
Katsunami Grand Sorcerer Posts: 6,111 Karma: 34000001 Join Date: Mar 2008 Device: KPW1, KA1	Which is "our version"? Lynx == Artatech version with Polish store and TTS T76 == Russian version All other T68 == "Official Boox International" version Is it like this?

07-03-2014, 10:36 AM	#30
Billi Wizard Posts: 3,388 Karma: 14190103 Join Date: Jun 2009 Location: Berlin Device: Cybook, iRex, PB, Onyx	Katsunami, if you want to buy at your Dutch store - why don't you ask them? They should know much better what they are selling than Booxtor. And according to the description on their website it could be the Artatech version. They mention Lynx somewhere and they mention the Ivona tts.

Advert

Advert