The absolute n00b guide to installing applications - Page 2

ragdoll · 01-22-2008, 09:54 AM

Quote:

Originally Posted by Adam B.

[*] Once you have unzipped the program, you should see a folder called "mrxvt".[*] Simply copy this folder to the internal memory or CF card on your iLiad.[*] Browse to the correct directory from your iLiad, and select the line that says "mrxvt: Command Shell".[/list][/list]

I followed all the steps and copied mrvxt to h:\ (which is my iLiad's root), then I browse the main memory from the iLiad and can see mrvxt folder, but can't execute anything.
Where am I wrong?

Adam B. · 01-22-2008, 10:32 AM

Has your iLiad downloaded the developer package and rebooted automatically?

ragdoll · 01-22-2008, 10:35 AM

Quote:

Originally Posted by Adam B.

Has your iLiad downloaded the developer package and rebooted automatically?

Yes, it has

wallcraft · 01-22-2008, 07:17 PM

I suggest trying mrxvt version 0.3 from here. If it actually runs, any error messages will end up in run.err (which you can view from a Desktop via USB). Note that I have only ever tried running mrxvt from a CF card.

ragdoll · 01-23-2008, 04:18 AM

Quote:

Originally Posted by wallcraft

I suggest trying mrxvt version 0.3 from here. If it actually runs, any error messages will end up in run.err (which you can view from a Desktop via USB). Note that I have only ever tried running mrxvt from a CF card.

Thank you, good advice, in fact, yesterday evening I downloaded and tried version 0.2 and it worked. Version 0.1 lacks manifest.
Btw, another question: I tried to create a manifest for version 0.1, except for the title and description it was the same as the 0.2 downloaded manifest, but it didn't work.
How are manifest files to be created?

canfish · 02-01-2008, 01:17 PM

Hi Adam B
Thanks for these very useful instructions. When can we read your post on "reflashing"? Given my inexperience it it a "must"

canfish

Adam B. · 02-01-2008, 02:06 PM

Right below this one: https://www.mobileread.com/forums/showthread.php?t=17343

canfish · 02-04-2008, 08:57 AM

Thanks.
Now all that I have to do is to pluck up the courage to try.

wallcraft · 02-04-2008, 11:20 AM

Unless you are a developer, you should never need to reflash. However, the process does seem straight forward. Here is a recent example. Note that the time consuming part was updating from 2.10 to 2.11.

I hit the same problem as kkttmm3 (screwing with fonts currently puts you in the developer category unfortunately), and so I prepared to reflash. However, I was able to recover by removing the CF card. Putting all new programs on the CF card is a good approach, because it can be modified if necessary in a CF reader outside the iLiad.

snowski55 · 03-15-2008, 11:09 PM

Hello,

I just got my iliad, and tried following these instructions. I connected to iDS, it downloaded firmware 2.12 (software build number 21201), and I downloaded the developer package and the iliad rebooted automatically. I then got mrxvt v0.1, and have tried v0.2, v0.3, v0.4. I put them on my root folder, navigate to that folder and try to execute. When I try, the progress bar at the bottom moves, and the screen refreshes after about 1 second, but nothing has happened.

Is this a problem with:
1) firmware 2.12?
2) not having the developer package installed properly?
3) mrxvt?
4) other?

How do I know if the developer package/shell access is on my system? How do I find out what the problem is? How do I get mrxvt working?

Thank you,
Ben

felonius · 03-16-2008, 03:55 PM

Quote:

Originally Posted by snowski55

Hello,

I just got my iliad, and tried following these instructions. I connected to iDS, it downloaded firmware 2.12 (software build number 21201), and I downloaded the developer package and the iliad rebooted automatically. I then got mrxvt v0.1, and have tried v0.2, v0.3, v0.4. I put them on my root folder, navigate to that folder and try to execute. When I try, the progress bar at the bottom moves, and the screen refreshes after about 1 second, but nothing has happened.

Is this a problem with:
1) firmware 2.12?
2) not having the developer package installed properly?
3) mrxvt?
4) other?

How do I know if the developer package/shell access is on my system? How do I find out what the problem is? How do I get mrxvt working?

Thank you,
Ben

I'm having the same problem as Ben. I also tried running the FBReader installer with the same results.

I checked the .err files in the directory for mrxvt and they were empty.

I'm really wondering if this is a 2.12 thing... I've pushed the developer stuff to the iLliad twice, and it rebooted itself successfully both times.

More details from Device Identification:
Software version: 2.12
build number: 21200
Kernel version: 2.4.19-rmk7-pxa-irex1 #21200

Any information would be great on this.

daudi · 03-16-2008, 05:01 PM

In case it helps, I have no shell access problems with:

Software version: 2.12
Build: 21201
Kernel: the same as yours, except #21100

So there are differences in the build number and whatever the number is at the end of the kernel name. But my build number is the same as snowski55's.

felonius · 03-17-2008, 10:23 AM

Quote:

Originally Posted by daudi

In case it helps, I have no shell access problems with:

Software version: 2.12
Build: 21201
Kernel: the same as yours, except #21100

So there are differences in the build number and whatever the number is at the end of the kernel name. But my build number is the same as snowski55's.

Did yours ship with 2.12? I acquired 2.12 via IDS. It looks like there may be a problem with some versions of 2.12 and shell access, according to: this thread.

I tried running the test script there, and it had no result. I also tried doing to the test to see if my iLliad could be reflashed (getting to the boot manager, etc.) and all that happens is that the screen goes "white" for a second, and the system restarts itself. I'm wondering if the Shell Access stuff just doesn't install correctly (even though I've tried about 4 times now).

Adam B. · 03-17-2008, 02:26 PM

Do you have spaces in the folder names in the path to your shell script? That's usually the only reason it would fail...

snowski55 · 03-17-2008, 02:55 PM

Quote:

Originally Posted by Adam B.

Do you have spaces in the folder names in the path to your shell script? That's usually the only reason it would fail...

No, I have no spaces. The folder name is always just mrxvt. It did not ship with 2.12, it downloaded via iDS. It does look like exact same problem from the thread linked by

Quote:

Originally Posted by felonius

Did yours ship with 2.12? I acquired 2.12 via IDS. It looks like there may be a problem with some versions of 2.12 and shell access, according to: this thread.

I tried running the test script there, and it had no result. I also tried doing to the test to see if my iLliad could be reflashed (getting to the boot manager, etc.) and all that happens is that the screen goes "white" for a second, and the system restarts itself. I'm wondering if the Shell Access stuff just doesn't install correctly (even though I've tried about 4 times now).

. What is going on here? Do I need to downgrade to v2.11? If so, then how do I do it?

02-04-2008, 08:57 AM	#23
canfish Junior Member Posts: 5 Karma: 10 Join Date: Sep 2007 Device: +27 (073) 2426052	Thanks Thanks. Now all that I have to do is to pluck up the courage to try.

03-15-2008, 11:09 PM	#25
snowski55 Junior Member Posts: 9 Karma: 10 Join Date: Mar 2008 Device: iliad	Still cannot get mrxvt working Hello, I just got my iliad, and tried following these instructions. I connected to iDS, it downloaded firmware 2.12 (software build number 21201), and I downloaded the developer package and the iliad rebooted automatically. I then got mrxvt v0.1, and have tried v0.2, v0.3, v0.4. I put them on my root folder, navigate to that folder and try to execute. When I try, the progress bar at the bottom moves, and the screen refreshes after about 1 second, but nothing has happened. Is this a problem with: 1) firmware 2.12? 2) not having the developer package installed properly? 3) mrxvt? 4) other? How do I know if the developer package/shell access is on my system? How do I find out what the problem is? How do I get mrxvt working? Thank you, Ben

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A Noobs Guide to Borrowing E-Library Books and Installing non Kobo Bookstore Books	bamelin	Kobo Reader	17	01-07-2012 05:11 PM
Absolute best eBook reader?	Xtt	Which one should I buy?	46	04-22-2010 02:48 AM
iLiad jharker:would you please write a guide on installing iLiadPowerManagement	tudou331100	iRex Developer's Corner	10	01-23-2009 12:19 AM
iLiad First HelloWorld tutorial, a n00b primer First Hello World Tutorial, a n00b primer	mind	iRex Developer's Corner	13	09-19-2008 10:43 AM
iLiad Installing community developed applications with 2.7.1	jæd	iRex Developer's Corner	15	03-21-2007 04:56 PM

01-22-2008, 10:32 AM	#17
Adam B. Addicted to Porting Posts: 1,697 Karma: 7194 Join Date: Oct 2006 Location: Indianapolis, IN Device: iRex iLiad, Nokia 770, Samsung i760	Has your iLiad downloaded the developer package and rebooted automatically?

01-22-2008, 07:17 PM	#19
wallcraft reader Posts: 6,975 Karma: 5183568 Join Date: Mar 2006 Location: Mississippi, USA Device: Kindle 3, Kobo Glo HD	I suggest trying mrxvt version 0.3 from here. If it actually runs, any error messages will end up in run.err (which you can view from a Desktop via USB). Note that I have only ever tried running mrxvt from a CF card.

02-01-2008, 01:17 PM	#21
canfish Junior Member Posts: 5 Karma: 10 Join Date: Sep 2007 Device: +27 (073) 2426052	Hi Adam B Thanks for these very useful instructions. When can we read your post on "reflashing"? Given my inexperience it it a "must" canfish

02-01-2008, 02:06 PM	#22
Adam B. Addicted to Porting Posts: 1,697 Karma: 7194 Join Date: Oct 2006 Location: Indianapolis, IN Device: iRex iLiad, Nokia 770, Samsung i760	Right below this one: https://www.mobileread.com/forums/showthread.php?t=17343

02-04-2008, 11:20 AM	#24
wallcraft reader Posts: 6,975 Karma: 5183568 Join Date: Mar 2006 Location: Mississippi, USA Device: Kindle 3, Kobo Glo HD	Unless you are a developer, you should never need to reflash. However, the process does seem straight forward. Here is a recent example. Note that the time consuming part was updating from 2.10 to 2.11. I hit the same problem as kkttmm3 (screwing with fonts currently puts you in the developer category unfortunately), and so I prepared to reflash. However, I was able to recover by removing the CF card. Putting all new programs on the CF card is a good approach, because it can be modified if necessary in a CF reader outside the iLiad.

03-16-2008, 05:01 PM	#27
daudi Addict Posts: 281 Karma: 904 Join Date: Oct 2007 Location: Kent, UK Device: iRex iLiad, Psion 5MX, nokia n800	In case it helps, I have no shell access problems with: Software version: 2.12 Build: 21201 Kernel: the same as yours, except #21100 So there are differences in the build number and whatever the number is at the end of the kernel name. But my build number is the same as snowski55's.

03-17-2008, 02:26 PM	#29
Adam B. Addicted to Porting Posts: 1,697 Karma: 7194 Join Date: Oct 2006 Location: Indianapolis, IN Device: iRex iLiad, Nokia 770, Samsung i760	Do you have spaces in the folder names in the path to your shell script? That's usually the only reason it would fail...

Advert

Advert