Kubrick: Live CD to debrick Kindle 3, 4, and Touch - Page 10

kecskesb · 03-03-2013, 08:49 PM

Thank you, this way everything works as intended.

kecskesb · 03-03-2013, 08:50 PM

Quote:

Originally Posted by knc1

The diags menu also appears on the serial port.
Just in case you lose count.

Sadly, there is no serial port on the Kindle 4 NT

knc1 · 03-03-2013, 08:54 PM

Quote:

Originally Posted by kecskesb

Sadly, there is no serial port on the Kindle 4 NT

Of course there is.
It is indexed in our system of prefix indexes found in a sticky at the top of the forum.
You will find indexed there the details of the serial port hook-up for each model of Kindle.

Let me save you a couple of clicks:
https://www.mobileread.com/forums/sho...d.php?t=166687

knc1 · 03-04-2013, 02:15 AM

@ixtab: Used Kubrick to un-Demo a cheap K4.

Everything "just worked" but there is one secret to my success:
I read each README.txt file that comes with every package.

A hint to others: rename the README.txt file each time you un-archive a package so that the next package's README.txt file does not over-write the prior one.

dsmid · 03-04-2013, 05:33 AM

The files mirrored by me are updated to 2.1 now.
The URIs haven't changed.

ixtab · 03-04-2013, 07:06 PM

Quote:

Originally Posted by dsmid

The files mirrored by me are updated to 2.1 now.
The URIs haven't changed.

(a bit late, but: ) thanks! First post updated accordingly.

PabloEr · 03-05-2013, 12:20 PM

I downgraded K3w firmware. I wrote Incorrectly addresses to ATK. The book became frozen. At connection to the computer at once passes to a downloading mode (the yellow LED). I addressed to the help of Kubrick 2 times. It didn't help. I think that I should download full image of Kindle. Then completely to fill in it inside. Thus I will use the high-capacity external battery. It is possible to make it by means of Kubrick? How to me to merge a full image of Kindle?
Thank`s

ixtab · 03-05-2013, 01:24 PM

@PabloEr: If Kubrick didn't solve the problem, then it can't.

You'll have to manually use k3flasher... but don't ask me for the exact steps required - I don't know. You may have more luck asking in the k3flasher thread.

PabloEr · 03-05-2013, 01:46 PM

Quote:

Originally Posted by PabloEr

I downgraded K3w firmware. I wrote Incorrectly addresses to ATK. The book became frozen. At connection to the computer at once passes to a downloading mode (the yellow LED). I addressed to the help of Kubrick 2 times. It didn't help. I think that I should download full image of Kindle. Then completely to fill in it inside. Thus I will use the high-capacity external battery. It is possible to make it by means of Kubrick? How to me to merge a full image of Kindle?
Thank`s

----------------------------------------------
It is solved. Absolutely foolish way - but worked!

1 . We take normal Kindle
2 . ATK: We dumping from 0х0000000 to 0x00041000 (DUMP)
3 . We put aside normal and we connect a brick.
4 . ATK: We fill in from 0x0000000 (PROGRAM)
5 . Press ON. Kindle starting.
6 . PROFIT! ! ! ! ! ! ! ! ! !
----------------------------------------------

What you will tell? ? ?

Excuse me. My english - too bad

dsmid · 03-05-2013, 03:08 PM

I hope you made a backup because now you have two Kindle devices with the same serial number.
I'm afraid Amazon won't like it.
You should have dumped only 0x40c00 bytes...
The next 0x400 bytes contain device ids.

PabloEr · 03-06-2013, 10:02 AM

Quote:

Originally Posted by dsmid

I hope you made a backup because now you have two Kindle devices with the same serial number.
I'm afraid Amazon won't like it.
You should have dumped only 0x40c00 bytes...
The next 0x400 bytes contain device ids.

WiFi MAC Address - unavailable
Serial Number - identical for second K3w

Not connect to WiFi

What me to do?

knc1 · 03-06-2013, 10:08 AM

Put the original MAC address and Serial Number back onto the device.

Look them up in your logs -
Look them up in your router -
Call Amazon customer service -
lots of things you can try.

hawhill · 03-06-2013, 05:55 PM

As dsmid wrote, the relevant data is stored in the 0x400 bytes at offset 0x40c00.
First dump them to a file, take a hex editor and edit them to the right values (see knc1's reply), then write it back.

PabloEr · 03-08-2013, 12:53 PM

Quote:

Originally Posted by hawhill

As dsmid wrote, the relevant data is stored in the 0x400 bytes at offset 0x40c00.
First dump them to a file, take a hex editor and edit them to the right values (see knc1's reply), then write it back.

Oh! Thank`you dear!

But small problem.
Serial and MAC is lost

I looked for everywhere, but anywhere didn't find. It simply didn't remain neither in a router nor in documents (they aren't present). in general isn't present. If to use data from other K3w it will give problems?
Naturally, these books won't be at the same time on the Internet.

twobob · 03-08-2013, 01:08 PM

its embedded in the DIAGS reports... if you backed any of them up in the past...

03-05-2013, 12:20 PM	#142
PabloEr Member Posts: 10 Karma: 10 Join Date: Dec 2012 Device: K3wifi	K3 dead... Kubrick didn't help. :( I downgraded K3w firmware. I wrote Incorrectly addresses to ATK. The book became frozen. At connection to the computer at once passes to a downloading mode (the yellow LED). I addressed to the help of Kubrick 2 times. It didn't help. I think that I should download full image of Kindle. Then completely to fill in it inside. Thus I will use the high-capacity external battery. It is possible to make it by means of Kubrick? How to me to merge a full image of Kindle? Thank`s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use regular DX(i) to debrick a DXG	craziskata	Kindle Developer's Corner	10	07-16-2013 09:10 AM
How to debrick a demo DXG?	xcomme	Kindle Developer's Corner	0	02-14-2013 04:06 PM
Trying to debrick, but connection keeps dropping	Zolyx	Kindle Developer's Corner	6	12-10-2012 08:04 AM
Help to Unbrick KT with simple debrick Method.	Loko_bielsa	Kindle Developer's Corner	2	07-16-2012 08:26 AM
A easy and offical way to debrick k3.	xueyou2	Kindle Developer's Corner	3	05-01-2012 09:42 AM

03-03-2013, 08:49 PM	#136
kecskesb Junior Member Posts: 3 Karma: 10 Join Date: Mar 2013 Device: Kindle Keyboard + 4NT	Thank you, this way everything works as intended.

03-04-2013, 02:15 AM	#139
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	@ixtab: Used Kubrick to un-Demo a cheap K4. Everything "just worked" but there is one secret to my success: I read each README.txt file that comes with every package. A hint to others: rename the README.txt file each time you un-archive a package so that the next package's README.txt file does not over-write the prior one.

03-04-2013, 05:33 AM	#140
dsmid Linux devotee Posts: 598 Karma: 2069047 Join Date: Feb 2011 Device: Kindle 3, Kindle 4B, Kindle PW2	The files mirrored by me are updated to 2.1 now. The URIs haven't changed.

03-05-2013, 01:24 PM	#143
ixtab (offline) Posts: 2,907 Karma: 6736094 Join Date: Dec 2011 Device: K3, K4, K5, KPW, KPW2	@PabloEr: If Kubrick didn't solve the problem, then it can't. You'll have to manually use k3flasher... but don't ask me for the exact steps required - I don't know. You may have more luck asking in the k3flasher thread.

03-05-2013, 03:08 PM	#145
dsmid Linux devotee Posts: 598 Karma: 2069047 Join Date: Feb 2011 Device: Kindle 3, Kindle 4B, Kindle PW2	I hope you made a backup because now you have two Kindle devices with the same serial number. I'm afraid Amazon won't like it. You should have dumped only 0x40c00 bytes... The next 0x400 bytes contain device ids.

03-06-2013, 10:08 AM	#147
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	Put the original MAC address and Serial Number back onto the device. Look them up in your logs - Look them up in your router - Call Amazon customer service - lots of things you can try.

03-06-2013, 05:55 PM	#148
hawhill Wizard Posts: 1,379 Karma: 2155307 Join Date: Nov 2010 Location: Goettingen, Germany Device: Kindle Paperwhite, Kobo Mini	As dsmid wrote, the relevant data is stored in the 0x400 bytes at offset 0x40c00. First dump them to a file, take a hex editor and edit them to the right values (see knc1's reply), then write it back.

03-08-2013, 01:08 PM	#150
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 6,586 Karma: 6299991 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\| K4\|K3-3G\|DXG\|K2\| Rooted Nook Touch	its embedded in the DIAGS reports... if you backed any of them up in the past...

Advert

Advert