![]() |
#1216 |
Junior Member
![]() Posts: 5
Karma: 10
Join Date: Jul 2023
Device: K4
|
Thanks a lot for developing this application. I used it to downgrade my K4 from 4.1.4 to 4.1.1 firmware, because I was receiving the "This device is not authorized as a test Kindle by the developer of this item" error.
For future reference: on recent systems, the live USB refused to boot. Even a 2015 laptop didn't work. However, it worked flawlessly on a 2010 ThinkPad (T410s). |
![]() |
![]() |
![]() |
#1217 |
Junior Member
![]() Posts: 4
Karma: 10
Join Date: Dec 2019
Location: Bulgaria
Device: Kindle 3
|
Also had to downgrade to 3.4 (K3 WiFi) because of the same "...test Kindle..." message. It was popping after every switch on of the WiFi and screwing my CoolReader installation. Thanks to Kubrick everything works flawlessly now. The workaround would be to prevent the Kindle to connect to internet while the WiFi is on, but I didn't know how to do it...
And yes, I can confirm that USB also refused to boot Kubrick on my old Acer Aspire E1-531, but I did it using the CD image instead... |
![]() |
![]() |
![]() |
#1218 |
Member
![]() Posts: 23
Karma: 10
Join Date: Jan 2024
Device: Kindle 3 Wifi
|
I booted the USB and Im stuck at "Kubrick starting up, please wait..."
Can someone give me advice? Im on an AMD Ryzen laptop in case that matters. |
![]() |
![]() |
![]() |
#1219 |
Junior Member
![]() Posts: 1
Karma: 10
Join Date: Jan 2024
Device: kindle touch
|
i recently screwed up, had a working kindle with duokan but stupidly decided to uninstall it just because windows didnt see my kindle (probably because as it turned out later it wont unless you use original cable...).
ever since kindle is stuck at loading screen (progress bar loads till full but then nothing happens again after that, jsut stuck like that forever). so i wanted to install the firmware anew with kubrick. made the usb stick bootable drive according to the instruction. restarting windows to make it select bootable usb stick as boot - getting black screen with "checking for bootable device... no device detected" or similar same meaning text. just doesn't see this usb as a bootable drive. you sure this works for win11? i guess it would expect a windows or OS bootable drive, and this usb stick is not an OS bootable drive, maybe that's why this error? are people using kubrick with win11? i mean, with success right? i wonder what went wrong in my case. (i know how to make bootable usb sticks, reinstalled my system many times with usb stick bootables, but i never used that particular win32 program you suggested) |
![]() |
![]() |
![]() |
#1220 |
Junior Member
![]() Posts: 1
Karma: 10
Join Date: Feb 2024
Device: Kindle Touch
|
I tried booting kubrick 3.6 on several notebooks now but with no luck. Does this even work anymore on modern hardware? Has any one tried it in recent days?
|
![]() |
![]() |
![]() |
#1221 |
Groupie
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 159
Karma: 1512689
Join Date: Jul 2023
Device: Kindle Scribe
|
Kubrick is based on SliTaz 3.0, from ca. 2010. It's not going to have hardware support for modern hardware. You might be able to run it in a VM, but that's going to have its own kettle of fish to deal with.
|
![]() |
![]() |
![]() |
#1222 |
Junior Member
![]() Posts: 1
Karma: 10
Join Date: Aug 2024
Device: K5
|
I've tried to get Kubrick to boot on hardware, however BIOS boot is being removed from many devices now, and I can only use UEFI. The kubrick ISO doesn't support this, so I've been trying with VirtualBox (on Windows 11 host). My device is a Kindle Touch.
Does anyone have the steps needed to get that working? I have setup a blank USB filter, so it should be catching any new USB device as they connect. I'm able to have it recognized and the USB downloader mode works, but then nothing happens on the Fastboot screen ("Waiting for device"). Are there other configs that need to be done on the VM? Anything with network devices, etc? I think it's going to be the reality soon for many people that they're going to need a BIOS based VM to get this to work. Or maybe some way to separate the kubrick programs from the Linux distro, so the distro could be upgraded to work with UEFI? |
![]() |
![]() |
![]() |
#1223 |
Groupie
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 159
Karma: 1512689
Join Date: Jul 2023
Device: Kindle Scribe
|
Kubrick is written in Java that's just as old as the distro it's running on. I don't think there's a lot of interest in it, but it might be less work overall to update it to a newer Java or rewrite it in a modern and more portable language.
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Use regular DX(i) to debrick a DXG | craziskata | Kindle Developer's Corner | 10 | 07-16-2013 08:10 AM |
How to debrick a demo DXG? | xcomme | Kindle Developer's Corner | 0 | 02-14-2013 03:06 PM |
Trying to debrick, but connection keeps dropping | Zolyx | Kindle Developer's Corner | 6 | 12-10-2012 07:04 AM |
Help to Unbrick KT with simple debrick Method. | Loko_bielsa | Kindle Developer's Corner | 2 | 07-16-2012 07:26 AM |
A easy and offical way to debrick k3. | xueyou2 | Kindle Developer's Corner | 3 | 05-01-2012 08:42 AM |