calibre friday preview releases - Page 3

chaley · 07-26-2024, 09:07 AM

Quote:

Originally Posted by ownedbycats

What specifically does this one do? It looks related to a Kobo database.

It adds support for new Tolino devices. See https://github.com/kovidgoyal/calibr...kobo/driver.py for a list of the commits. I haven't looked at what the changes do.

gbm · 07-26-2024, 09:39 AM

See This thread.

bernie

Quote:

Originally Posted by ownedbycats

What specifically does this one do? It looks related to a Kobo database.

beedaddy · 07-26-2024, 09:46 AM

Quote:

Originally Posted by ownedbycats

What specifically does this one do? It looks related to a Kobo database.

The new tolino devices with fw 5.x use 1 and 0 instead of "true" and "false" for boolean values. See this thread.

EDIT: Sorry, didn't notice the last two or three posts

DNSB · 07-26-2024, 07:44 PM

I've reverted back to the 7.15 kobo driver from the preview release driver. I get errors when writing metadata to my Libra Colour and Sage. Replacing the contents of /src/calibre/devices/kobo with the version from 7.15 corrects the issue.

Error message text is:

Code:

SQLError: incomplete input

Traceback (most recent call last):
  File "D:\calibre\calibre-master\src\calibre\gui2\device.py", line 112, in run
  File "D:\calibre\calibre-master\src\calibre\gui2\device.py", line 596, in _sync_booklists
  File "D:\calibre\calibre-master\src\calibre\devices\kobo\driver.py", line 1017, in sync_booklists
  File "D:\calibre\calibre-master\src\calibre\devices\kobo\driver.py", line 2712, in update_device_database_collections
  File "D:\calibre\calibre-master\src\calibre\devices\kobo\driver.py", line 3097, in delete_empty_bookshelves
  File "C:\t\t\apsw-42s16m2x\src\cursor.c", line 1088, in APSWCursor_execute.sqlite3_prepare_v3
apsw.SQLError: SQLError: incomplete input

kovidgoyal · 07-27-2024, 01:05 AM

@DNSB: This should fix it: https://github.com/kovidgoyal/calibr...5d26a472a52432

Sadly I dont have a kobo so no way for me to test this beastie.

DNSB · 07-27-2024, 01:32 AM

Added the ) in line 3989 and tested on 3 Kobo's. No errors seen. Once again, Kovid comes to the rescue!

kovidgoyal · 08-16-2024, 01:23 AM

Released preview version 7.16.100 which is built with the latest available Qt 6.7.2. Hopefully that fixes some crashing bugs with assistive technologies on macOS, though this being Qt, I am sure it introduces other regressions. So testing would be appreciated. Thanks.

chaley · 08-16-2024, 05:33 AM

Quote:

Originally Posted by kovidgoyal

Released preview version 7.16.100 which is built with the latest available Qt 6.7.2. Hopefully that fixes some crashing bugs with assistive technologies on macOS, though this being Qt, I am sure it introduces other regressions. So testing would be appreciated. Thanks.

The release files are here. The commit list is here.

DNSB · 08-17-2024, 02:31 PM

Not certain if this is related to the preview release but it's the first time I went to change a conversion setting in quite a while. There almost seems as if I am seeing two windows stuffed into one. I've attached some sample images.

Edit: after trying the conversion options, when I went to Sharing over the net, I still had the conversion options screen showing.

Edit 2: Restarted calibre and still had the same issue. Shut calibre down, removed run from source, started calibre and looked okay. Shut calibre down again, went back to running from source and issue was still gone.

theducks · 08-17-2024, 04:40 PM

It does not do this on 7.16 W10

DNSB · 08-17-2024, 04:45 PM

I'm not sure if it was more than a one off glitch. I am running 7.16.100 preview with run from source, Windows 11 23H2. After I noticed it this morning, it has not happened again. Perhaps I should not have disabled run from source, etc.

chaley · 08-17-2024, 07:08 PM

Quote:

Originally Posted by DNSB

I'm not sure if it was more than a one off glitch. I am running 7.16.100 preview with run from source, Windows 11 23H2. After I noticed it this morning, it has not happened again. Perhaps I should not have disabled run from source, etc.

Possibly you ran the 7.16.100 binary with pre-7.16.100 source? Or the opposite, 7.16.100 source with a previous binary? I have found that from time to time running from source doesn't work because the source requires a change in some embedded software like Qt, python, or one of the C libraries used to interface to the OS. These are included in the binary. There have been times where Kovid was kind enough to build a beta binary so I could continue running from the latest source.

It is a good idea to install the latest binary if you are running a later source.

DNSB · 08-17-2024, 10:09 PM

Quote:

Originally Posted by chaley

Possibly you ran the 7.16.100 binary with pre-7.16.100 source? Or the opposite, 7.16.100 source with a previous binary? I have found that from time to time running from source doesn't work because the source requires a change in some embedded software like Qt, python, or one of the C libraries used to interface to the OS. These are included in the binary. There have been times where Kovid was kind enough to build a beta binary so I could continue running from the latest source.

It is a good idea to install the latest binary if you are running a later source.

I had installed the 7.16.100 MSI and the source code downloaded from the calibre site at 21:45 PDT on 2024-Aug-15 with calibre not running so as close a match as I could get. I did not see the issue until this morning. Once I saw the issue, it survived a calibre restart. It wasn't until I disabled run from source and ran the binary, this issue cleared up. When I switched back to running from source, the problem did not show up. OTOH, it took over a day for the problem to show up the first time so I'm not going to write it off for a few more days.

kovidgoyal · 08-18-2024, 12:22 AM

Looks like a Qt glitch (the widget isnt being stretched to fill available space so you can see the widget underneath), if you can find a way to reproduce I would be most interested, it doesnt happen for me running from source or not.

JSWolf · 08-18-2024, 06:25 PM

Quote:

Originally Posted by DNSB

Not certain if this is related to the preview release but it's the first time I went to change a conversion setting in quite a while. There almost seems as if I am seeing two windows stuffed into one. I've attached some sample images.

Edit: after trying the conversion options, when I went to Sharing over the net, I still had the conversion options screen showing.

Edit 2: Restarted calibre and still had the same issue. Shut calibre down, removed run from source, started calibre and looked okay. Shut calibre down again, went back to running from source and issue was still gone.

I just installed the 7.16.100 preview and I got the same result. I closed preferences, went back in, and it didn't do it.

I've rerun the preview and went into preferences a few times and nothing happened. I'll report back if it does happen again.

08-17-2024, 02:31 PM	#39
DNSB Bibliophagist Posts: 40,524 Karma: 156983616 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	Not certain if this is related to the preview release but it's the first time I went to change a conversion setting in quite a while. There almost seems as if I am seeing two windows stuffed into one. I've attached some sample images. Edit: after trying the conversion options, when I went to Sharing over the net, I still had the conversion options screen showing. Edit 2: Restarted calibre and still had the same issue. Shut calibre down, removed run from source, started calibre and looked okay. Shut calibre down again, went back to running from source and issue was still gone. Attached Thumbnails Last edited by DNSB; 08-17-2024 at 04:30 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dockerise multiple Calibre releases for plugin development	wolf123	Related Tools	1	02-06-2021 04:12 AM
[Q] How can I check for new releases in a series in calibre or goodreads?	lambstone	Kobo Reader	1	09-09-2016 01:04 AM
CC B4.0.X beta (all releases)	chaley	Calibre Companion	41	07-21-2015 07:53 AM
CC beta releases 3.4.4j, 3.4.4k, 3.4.4l	chaley	Calibre Companion	33	10-21-2014 07:19 AM
dotReader releases first public beta	Alexander Turcic	Reading and Management	4	11-23-2006 02:40 AM

07-27-2024, 01:05 AM	#35
kovidgoyal creator of calibre Posts: 44,542 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	@DNSB: This should fix it: https://github.com/kovidgoyal/calibr...5d26a472a52432 Sadly I dont have a kobo so no way for me to test this beastie.

07-27-2024, 01:32 AM	#36
DNSB Bibliophagist Posts: 40,524 Karma: 156983616 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	Added the ) in line 3989 and tested on 3 Kobo's. No errors seen. Once again, Kovid comes to the rescue!

08-16-2024, 01:23 AM	#37
kovidgoyal creator of calibre Posts: 44,542 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Released preview version 7.16.100 which is built with the latest available Qt 6.7.2. Hopefully that fixes some crashing bugs with assistive technologies on macOS, though this being Qt, I am sure it introduces other regressions. So testing would be appreciated. Thanks.

08-17-2024, 04:40 PM	#40
theducks Well trained by Cats Posts: 30,443 Karma: 58055868 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	It does not do this on 7.16 W10

08-17-2024, 04:45 PM	#41
DNSB Bibliophagist Posts: 40,524 Karma: 156983616 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	I'm not sure if it was more than a one off glitch. I am running 7.16.100 preview with run from source, Windows 11 23H2. After I noticed it this morning, it has not happened again. Perhaps I should not have disabled run from source, etc.

08-18-2024, 12:22 AM	#44
kovidgoyal creator of calibre Posts: 44,542 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Looks like a Qt glitch (the widget isnt being stretched to fill available space so you can see the widget underneath), if you can find a way to reproduce I would be most interested, it doesnt happen for me running from source or not.