Library Location Configs Mac

axlrod · 07-13-2024, 11:01 AM

I am developing a bash script for Mac that will allow me to wrap and run a portable version of Calibre on a Mac.

One of the recurring issues I encounter is when the script is used on a new machine. In such cases, it fails to recognize/Volumes/CaliberPortable/Library as the library location, as it has been mounted as "/Volumes/Calibre 1." This necessitates a manual search for the library.

I don't think there is any way to use relative paths; or is there? That would be the ideal solution!

If not, assuming I tracked down all the JSON files and tweaked those usng my wrapper script before Calibre launches, would that be a safe way to change it with the script? Is there a better way?

Also, to update the quick switch menu to additional Libraries, can I just adjust the history.plist file?

kovidgoyal · 07-14-2024, 12:30 AM

Look at the calibre-portable.sh script in the resources folder of a calibre install to see how to do it. You just need toset a few env vars

axlrod · 07-14-2024, 07:08 PM

I did not realize that might work for a Mac. Are there any detailed instructions for setting that up? I dropped the caliber.app and created the two default directories, I got this far and pressed Ctrl-C:

Code:

$ calibre.app/Contents/Resources/resources/calibre-portable.sh 
Generating default configuration file at /Volumes/PortableCalibre/Books/calibre-portable.conf
Set any non-default options here.
CONFIG FILES:       /Volumes/PortableCalibre/Books/CalibreConfig
--------------------------------------------------
LIBRARY FILES:      /Volumes/PortableCalibre/Books/CalibreLibrary
--------------------------------------------------
SOURCE FILES:       *** Not being Used ***
--------------------------------------------------
PROGRAM FILES:      No portable copy found.
To install a portable copy, run './calibre-portable.sh --upgrade-install'
*** Using system search path instead***
--------------------------------------------------
tr: Illegal byte sequence
TEMPORARY FILES:    /tmp/CALIBRE_TEMP_
--------------------------------------------------

Press CTRL-C if you do not want to continue
Press ENTER to continue and start calibre

The built-in script in resources looks a lot cleaner than my method. If I had a definitive guide on the steps different from Linux on a Mac, I could likely take it from there and stop asking too many questions.

Maybe I need to create a Calibre folder and drop the app in there for the first issue? I imagine not, as I believe it looks for a ${BIN_DIR}/calibre and not a calibre.app, or the system search path for "calibre", or spits out that error.

For the temp directory I am pretty sure I can just tweak the calibre-portable.conf to use CALIBRE_TEMP_DIR="$\(pwd)/CalibreTemp"

Or am I on the wrong path to even try and use that script on a Mac? I might have the skills to work through adding Mac support to the script to work on a Mac once I get this figured out.

kovidgoyal · 07-15-2024, 12:02 AM

No clue, this was a user contributed script. All the env vars it uses are documented in the manual at https://manual.calibre-ebook.com/cus...ment-variables
you can create your own script using them to run calibre with specified config, cache and temp directories, You can specify the path to the library to start with using --with-library.

07-13-2024, 11:01 AM	#1
axlrod Junior Member Posts: 5 Karma: 10 Join Date: Oct 2011 Location: The Shire Device: iPad	Library Location Configs Mac I am developing a bash script for Mac that will allow me to wrap and run a portable version of Calibre on a Mac. One of the recurring issues I encounter is when the script is used on a new machine. In such cases, it fails to recognize/Volumes/CaliberPortable/Library as the library location, as it has been mounted as "/Volumes/Calibre 1." This necessitates a manual search for the library. I don't think there is any way to use relative paths; or is there? That would be the ideal solution! If not, assuming I tracked down all the JSON files and tweaked those usng my wrapper script before Calibre launches, would that be a safe way to change it with the script? Is there a better way? Also, to update the quick switch menu to additional Libraries, can I just adjust the history.plist file?

07-14-2024, 07:08 PM	#3
axlrod Junior Member Posts: 5 Karma: 10 Join Date: Oct 2011 Location: The Shire Device: iPad	I did not realize that might work for a Mac. Are there any detailed instructions for setting that up? I dropped the caliber.app and created the two default directories, I got this far and pressed Ctrl-C: Code: $ calibre.app/Contents/Resources/resources/calibre-portable.sh Generating default configuration file at /Volumes/PortableCalibre/Books/calibre-portable.conf Set any non-default options here. CONFIG FILES: /Volumes/PortableCalibre/Books/CalibreConfig -------------------------------------------------- LIBRARY FILES: /Volumes/PortableCalibre/Books/CalibreLibrary -------------------------------------------------- SOURCE FILES: * Not being Used * -------------------------------------------------- PROGRAM FILES: No portable copy found. To install a portable copy, run './calibre-portable.sh --upgrade-install' * Using system search path instead* -------------------------------------------------- tr: Illegal byte sequence TEMPORARY FILES: /tmp/CALIBRE_TEMP_ -------------------------------------------------- Press CTRL-C if you do not want to continue Press ENTER to continue and start calibre The built-in script in resources looks a lot cleaner than my method. If I had a definitive guide on the steps different from Linux on a Mac, I could likely take it from there and stop asking too many questions. Maybe I need to create a Calibre folder and drop the app in there for the first issue? I imagine not, as I believe it looks for a ${BIN_DIR}/calibre and not a calibre.app, or the system search path for "calibre", or spits out that error. For the temp directory I am pretty sure I can just tweak the calibre-portable.conf to use CALIBRE_TEMP_DIR="$\(pwd)/CalibreTemp" Or am I on the wrong path to even try and use that script on a Mac? I might have the skills to work through adding Mac support to the script to work on a Mac once I get this figured out.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Library Database location vs Library location (nas)	sshaikh	Calibre	1	02-01-2023 08:02 PM
My configs and locations?	devtech8	Library Management	11	12-24-2018 05:39 AM
Kindle for Mac book folder location	Mkoenig	Amazon Kindle	12	01-04-2018 10:21 PM
Export configs..?	JTAL604622	Calibre	1	07-26-2011 07:48 PM
Windows XP Service Configs	Colin Dunstan	Lounge	1	08-04-2004 06:50 AM

07-14-2024, 12:30 AM	#2
kovidgoyal creator of calibre Posts: 44,650 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Look at the calibre-portable.sh script in the resources folder of a calibre install to see how to do it. You just need toset a few env vars

07-15-2024, 12:02 AM	#4
kovidgoyal creator of calibre Posts: 44,650 Karma: 24495948 Join Date: Oct 2006 Location: Mumbai, India Device: Various	No clue, this was a user contributed script. All the env vars it uses are documented in the manual at https://manual.calibre-ebook.com/cus...ment-variables you can create your own script using them to run calibre with specified config, cache and temp directories, You can specify the path to the library to start with using --with-library.