Tolino Vision 6 stuck at boot screen

irc_user0213 · 05-14-2024, 03:38 PM

Thanks to Waldy's willingness to help, I successfully revived my old Shine HD, which has encouraged me to attempt the same with my Tolino Vision 6, currently stuck on the boot screen. I have no idea if this is due to a corrupt SD card or something else. Upon opening the device, I was unpleasantly surprised to find that the SD card was securely glued to the slot. Any ideas would be greatly appreciated.

DNSB · 05-14-2024, 08:58 PM

I suspect that what you are seeing is not glue but the conformal coating to protect the electronics from water. You might want to check this thread for one person's experience removing the µSD card from their Libra 2.

You may also want to check the Tolino Vision 6 Bootloop thread in this forum. You should be able to obtain the correct image for your Tolino.

Another item is that for your request for an firmware image is that you will need to have Private Messages enabled before you can be sent the link. The easiest way to do this is to post in the Requests to enable Private Messages thread to ask for PMs to be enabled.

irc_user0213 · 05-15-2024, 03:20 AM

Thank you very much for the heads up and your patience!

05-14-2024, 03:38 PM	#1
irc_user0213 Junior Member Posts: 8 Karma: 10 Join Date: May 2024 Device: Kobo Touch, Sony PRS-350	Tolino Vision 6 stuck at boot screen Thanks to Waldy's willingness to help, I successfully revived my old Shine HD, which has encouraged me to attempt the same with my Tolino Vision 6, currently stuck on the boot screen. I have no idea if this is due to a corrupt SD card or something else. Upon opening the device, I was unpleasantly surprised to find that the SD card was securely glued to the slot. Any ideas would be greatly appreciated.

05-14-2024, 08:58 PM	#2
DNSB Bibliophagist Posts: 40,555 Karma: 157444380 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	I suspect that what you are seeing is not glue but the conformal coating to protect the electronics from water. You might want to check this thread for one person's experience removing the µSD card from their Libra 2. You may also want to check the Tolino Vision 6 Bootloop thread in this forum. You should be able to obtain the correct image for your Tolino. Another item is that for your request for an firmware image is that you will need to have Private Messages enabled before you can be sent the link. The easiest way to do this is to post in the Requests to enable Private Messages thread to ask for PMs to be enabled. Last edited by DNSB; 05-14-2024 at 09:07 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help! My Kindle Voyage is stuck on boot screen	espn5008	Amazon Kindle	7	04-23-2016 10:23 PM
Pocketbook 614 stuck on boot screen	Lyka	PocketBook	0	05-26-2015 09:11 AM
Paperwhite stuck on the boot screen	yurikag	Kindle Developer's Corner	20	02-02-2013 12:29 PM
PE Stuck on boot screen	sonicware	enTourage eDGe	9	09-24-2011 10:38 PM
Opus cannot boot, stuck on boot screen	baloma	Bookeen	35	11-13-2010 05:20 AM

05-15-2024, 03:20 AM	#3
irc_user0213 Junior Member Posts: 8 Karma: 10 Join Date: May 2024 Device: Kobo Touch, Sony PRS-350	Thank you very much for the heads up and your patience!