![]() |
#1 |
Sorry for my English
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 458
Karma: 3009894
Join Date: Aug 2018
Location: France.Besancon
Device: KOBO.PocketBook.ONYX
|
POCKETBOOK UART Conect
Hello everyone !!
For those even for less experienced users who are looking for a procedure on how to connect and use UART on Pocketbook readers, I would like to share my following procedure, which you will find: https://cod-box.net/pocketbook-conne...via-uart-hack/ Last edited by Michal Jancik; 04-20-2024 at 06:40 PM. |
![]() |
![]() |
![]() |
#2 |
0000000000101010
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 5,669
Karma: 11226897
Join Date: Mar 2023
Location: An island off the coast of Ireland
Device: PB632 [HD3]
|
Interesting. Do you have a project in mind now you have a UART connection?
|
![]() |
![]() |
![]() |
#3 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 762
Karma: 622658
Join Date: Sep 2013
Device: EnergySistemEreaderPro, Nook STG, Pocketbook 622, Bookeen Cybooks ...
|
Interesting trick with the connection and the clamp. I soldered mine to stay on the connected side.
|
![]() |
![]() |
![]() |
#4 | |
Sorry for my English
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 458
Karma: 3009894
Join Date: Aug 2018
Location: France.Besancon
Device: KOBO.PocketBook.ONYX
|
Quote:
I had to use the clip because I often had a problem getting into the console, I had to disconnect and reconnect (on the fly) in order to type commands (to appear after pressing ENTER #,it didn't even help when I sent ^C through the terminal) ..as always, everything has its pros and cons ![]() However, there are also disadvantages to using a clamp, such as the other side of the clamp touching the screen. Also, you can't move the electronic reader too much so that the terminal doesn't move outside the UART pins on the motherboard. . PS : Unfortunately, I don't have any projects or ideas, I don't even have time, as unfortunately it often happens in the life of a mere mortal ![]() Last edited by Michal Jancik; 04-21-2024 at 09:49 AM. |
|
![]() |
![]() |
![]() |
#5 |
0000000000101010
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 5,669
Karma: 11226897
Join Date: Mar 2023
Location: An island off the coast of Ireland
Device: PB632 [HD3]
|
|
![]() |
![]() |
![]() |
#6 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 762
Karma: 622658
Join Date: Sep 2013
Device: EnergySistemEreaderPro, Nook STG, Pocketbook 622, Bookeen Cybooks ...
|
Sorry no, just keep it in mind in case I brick it (again), sic.
But I do like to read with it! ![]() |
![]() |
![]() |
![]() |
#7 |
0000000000101010
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 5,669
Karma: 11226897
Join Date: Mar 2023
Location: An island off the coast of Ireland
Device: PB632 [HD3]
|
|
![]() |
![]() |
![]() |
#8 |
Guru
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 762
Karma: 622658
Join Date: Sep 2013
Device: EnergySistemEreaderPro, Nook STG, Pocketbook 622, Bookeen Cybooks ...
|
Didn't try it. I did not have a deeper look into it and wouldn't do it as long as I don't have a way to safely backup and flash the board.
|
![]() |
![]() |
![]() |
#9 |
Sorry for my English
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 458
Karma: 3009894
Join Date: Aug 2018
Location: France.Besancon
Device: KOBO.PocketBook.ONYX
|
I would also be interested in that.
I know that it is possible to start an update with a swupdate command (for updating from the swupdate.bin file, which must be in the root directory), but in this case it is not a re-flash but an update. I am interested in Re-Flash because I have a broken pocketbook that I need to reflash. After powering on, an error is displayed:epdc_default_init ERROR cannot open eink When holding down [ESC] key at start-up you can also get into UBOOT, but for now I didn't have time to look up how to re-flash the unity.. Last edited by Michal Jancik; 04-22-2024 at 03:26 PM. |
![]() |
![]() |
![]() |
#10 | |
Zealot
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 126
Karma: 87007
Join Date: Apr 2021
Device: Lux 5, Libra 2, PRS-T2N
|
Nice fix
![]() Quote:
See for example: https://linux-sunxi.org/PocketBook_Touch_Lux_3#FEL_mode |
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PW5 Getting UART and UART root shell on PW5 | trimen | Kindle Developer's Corner | 16 | 07-21-2024 07:34 AM |
PRS-T1 PRS-T1 run from SD card / UART recovery from broken internal flash | jpa | Sony Reader Dev Corner | 20 | 07-29-2023 12:25 AM |
Pocketbook Touch Lux 3 PocketBook PB626(2) - Probleme mit SD-Karte + Akku | jibrail | PocketBook | 1 | 01-16-2019 03:38 PM |
PRS-500 PRS-500; UART, U-Boot experts: HELP! | Melongasoil | Sony Reader Dev Corner | 0 | 01-12-2010 04:09 PM |
PRS-500 UART found. Console output demonstrated. | obelix | Sony Reader Dev Corner | 1 | 12-20-2007 09:47 PM |