04-04-2024, 12:54 PM | #1 |
Junior Member
Posts: 1
Karma: 10
Join Date: Mar 2024
Device: Kindle PW1
|
Cant access fastboot mode
Hi!
I have a bootlooping kinlde PW and I'm trying to unbrick it using Santactic's methode https://www.mobileread.com/forums/sh...d.php?t=359315 , but when i try to get into fastboot mode it is only shows the voltage of the battery over and over, and i am not able to run any command. Code:
uboot > bist fastboot U-Boot 2009.08-lab126 (Sep 28 2012 - 14:28:00) CPU: Freescale i.MX50 family 1.1V at 800 MHz mx50 pll1: 800MHz mx50 pll2: 400MHz mx50 pll3: 216MHz ipg clock : 66666666Hz ipg per clock : 66666666Hz uart clock : 24000000Hz cspi clock : 54000000Hz ahb clock : 133333333Hz axi_a clock : 400000000Hz axi_b clock : 200000000Hz weim_clock : 100000000Hz ddr clock : 266666666Hz esdhc1 clock : 80000000Hz esdhc2 clock : 80000000Hz esdhc3 clock : 80000000Hz esdhc4 clock : 80000000Hz MMC: FSL_ESDHC: 0, FSL_ESDHC: 1 Board: Celeste (256 MB) Boot Reason: [POR] Boot Device: MMC Board Id: 015138206XS S/N: B01 I2C: ready DRAM: 256 MB Using default environment In: serial Out: serial Err: serial POST done in 2 ms Battery voltage: 4021 mV running cmd: fastboot Entering fastboot mode... Battery voltage: 4026 mV USB speed: HIGH Connected to USB host! USB configured. Battery voltage: 4129 mV Battery voltage: 4138 mV Do you have any ideas what could be the problem? This what I see when I normally let the system to run: Code:
In: serial Out: logbuff Err: logbuff Quick Memory Test 0x70000000, 0xfffe000 POST done in 17 ms Hit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at 70800000 ... Image Name: Linux-2.6.31-rt11-lab126 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4608576 Bytes = 4.4 MB Load Address: 70008000 Entry Point: 70008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... 2.6.31-rt11-lab126 #1 Fri Sep 28 14:59:26 PDT 2012 armv7l INFO:Loaded module /lib/modules/eink_fb_waveform.ko (38984 bytes) INFO:Loaded module /lib/modules/mxc_epdc_fb.ko default_panel_hw_init=1 default_update_mode=1 (51140 bytes) INFO:eink initialized... (786432 bytes) Press [ENTER] for recovery menu... 0 /INFO:!!! Checking MBR /dev/mmcblk0 !!!! INFO:partition 2, start sector is 782336 INFO:partition 3, start sector is 913408 INFO:partition 4, start sector is 1044480 INFO:maximizing partition 2863104 sectors INFO:*** Partition table verified for /dev/mmcblk0 *** INFO:Checking for updates... (auto-pilot mode) /dev/mmcblk0p4: CHS=4/16/44736 size=1465909248 bytes flag type first last lba first lba size Partition p1: 0x00 0x0b 16 <large> 16 2863088 CHS: 0/1/1 - <large> Partition p2: Partition p3: Partition p4: INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 8192 INFO:No update*.bin found; no update needed. INFO:no updates found. BOOTING DEFAULT. argc == 11 argv[0]: "kinit" argv[1]: "consoleblank=0" argv[2]: "rootwait" argv[3]: "ro" argv[4]: "ip=off" argv[5]: "root=/dev/mmcblk0p1" argv[6]: "quiet" argv[7]: "eink=fslepdc" argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M" argv[9]: "mem=256M" argv[10]: "console=ttymxc0,115200" argc == 4 argv[0]: "IP-Config" argv[1]: "-i" argv[2]: "Linux kinit" argv[3]: "ip=off" IP-Config: no devices to configure kinit: do_mounts kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1) kinit: root_dev = dev(179,1) kinit: /dev/root appears to be a ext3 filesystem kinit: trying to mount /dev/root on /root with type ext3 kinit: Mounted root (ext3 filesystem) readonly. info system:emiting_event:mounted_proc: info system:emiting_event:mounted_sys: info system:emiting_event:mounted_dev: info system:emiting_event:mounted_tmpfs: info milestone:5.39:sy50: init.exe: recevent pre-start process (496) terminated with status 1 info system:start:time=5410: info system:config:platform=yoshime3,board=celeste,rev=21,proto=N,wifi=Y,wan=Y: info milestone:5.62:sy51: info milestone:6.26:sy99: info system:done:time=6290: info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images: info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted: info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted: info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted: info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted: info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted: info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted: info system:emiting_event:mounted_cramfs_loopbacks: info milestone:6.92:fs75: info system:emiting_event:loaded_modules_dependencies: info modules:modprobe:loading module g_file_storage: info system:emiting_event:loaded_g_file_storage: info modules:modprobe:loading module fuse: info system:emiting_event:loaded_fuse: info modules:modprobe:loading module mwan: info milestone:7.29:fs00: info system:emiting_event:loaded_mwan: Welcome to Kindle! kindle login: info modules:modprobe:loading module ppp_async: info system:emiting_event:loaded_ppp_async: info system:emiting_event:loaded_fakekey: info system:emiting_event:mounted_varLocal: info milestone:7.56:fs25: info milestone:7.60:vi00: info display:update:Displaying splash screen: info milestone:7.95:vi99: info display:started:time=7960: info system:emiting_event:display_ready: info userstore:run:time=8200,action=start: info battery:charged:cap=89,mV=4086,mAH=647: info system:emiting_event:battery_ready: info cyttsp:update:vendor=CANDO: info system:emiting_event:loaded_touch: info system:emiting_event:mounted_userstore: info milestone:10.53:fs50: info milestone:10.55:fs90: info milestone:10.58:fs99: info milestone:10.61:sys99: info system:emiting_event:dbus_ready: info dbus:check-update:status=2:dbus_ready sent info wan:info:type=4,version=ELMO_04_04_00: info wand.conf:::wan start script complete info milestone:11.96:xx00: info X:load:time=12050: info X:xorg.conf:Generating xorg.conf: info X:makexconfig:Celeste Input device detection status: info X:makexconfig:Touch device: OK: info X:makexconfig:Accelerometer device: N/A !!: info X:xorg.conf:xorg.conf generated: info milestone:12.81:xx50: info X:starting:time=12840: info x_monitor:x_monitor starts:: info wifim:enablediv:enabling antenna diversity for wifi...: info x_monitor:read_counters::REBOOTS=0, RESTART=0, REBOOT_LIMIT=1, RESTART_LIMIT=5 |
Tags |
bootloop, kindle pw |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KOA2 Is exists fastboot mode? | gothlugh | Kindle Developer's Corner | 3 | 06-16-2018 04:46 PM |
[SOLVED] PW2 stuck in Fastboot mode | denydias | Kindle Developer's Corner | 22 | 10-01-2017 01:46 PM |
Unable to enter fastboot mode on PW2 | Egor | Kindle Developer's Corner | 14 | 09-23-2017 02:11 PM |
KV Fastboot mode problem | VolDr | Kindle Developer's Corner | 13 | 02-21-2016 09:26 AM |
How do I charge Kindle TOuch in fastboot mode? | thsheng | Kindle Developer's Corner | 3 | 02-26-2013 02:16 AM |