Kubrick: Live CD to debrick Kindle 3, 4, and Touch - Page 82

tubular · 07-17-2023, 03:39 AM

Thanks a lot for developing this application. I used it to downgrade my K4 from 4.1.4 to 4.1.1 firmware, because I was receiving the "This device is not authorized as a test Kindle by the developer of this item" error.

For future reference: on recent systems, the live USB refused to boot. Even a 2015 laptop didn't work. However, it worked flawlessly on a 2010 ThinkPad (T410s).

ton4eff · 08-23-2023, 10:56 AM

Also had to downgrade to 3.4 (K3 WiFi) because of the same "...test Kindle..." message. It was popping after every switch on of the WiFi and screwing my CoolReader installation. Thanks to Kubrick everything works flawlessly now. The workaround would be to prevent the Kindle to connect to internet while the WiFi is on, but I didn't know how to do it...
And yes, I can confirm that USB also refused to boot Kubrick on my old Acer Aspire E1-531, but I did it using the CD image instead...

PaigheTurn · 01-10-2024, 03:00 PM

I booted the USB and Im stuck at "Kubrick starting up, please wait..."

Can someone give me advice? Im on an AMD Ryzen laptop in case that matters.

tenko · 01-16-2024, 03:33 PM

i recently screwed up, had a working kindle with duokan but stupidly decided to uninstall it just because windows didnt see my kindle (probably because as it turned out later it wont unless you use original cable...).

ever since kindle is stuck at loading screen (progress bar loads till full but then nothing happens again after that, jsut stuck like that forever).

so i wanted to install the firmware anew with kubrick. made the usb stick bootable drive according to the instruction. restarting windows to make it select bootable usb stick as boot - getting black screen with "checking for bootable device... no device detected" or similar same meaning text. just doesn't see this usb as a bootable drive.

you sure this works for win11? i guess it would expect a windows or OS bootable drive, and this usb stick is not an OS bootable drive, maybe that's why this error? are people using kubrick with win11? i mean, with success right? i wonder what went wrong in my case.

(i know how to make bootable usb sticks, reinstalled my system many times with usb stick bootables, but i never used that particular win32 program you suggested)

XenGi · 02-25-2024, 05:35 AM

I tried booting kubrick 3.6 on several notebooks now but with no luck. Does this even work anymore on modern hardware? Has any one tried it in recent days?

Frogm4n · 02-25-2024, 02:28 PM

Kubrick is based on SliTaz 3.0, from ca. 2010. It's not going to have hardware support for modern hardware. You might be able to run it in a VM, but that's going to have its own kettle of fish to deal with.

orev · 08-12-2024, 11:11 PM

I've tried to get Kubrick to boot on hardware, however BIOS boot is being removed from many devices now, and I can only use UEFI. The kubrick ISO doesn't support this, so I've been trying with VirtualBox (on Windows 11 host). My device is a Kindle Touch.

Does anyone have the steps needed to get that working? I have setup a blank USB filter, so it should be catching any new USB device as they connect. I'm able to have it recognized and the USB downloader mode works, but then nothing happens on the Fastboot screen ("Waiting for device").

Are there other configs that need to be done on the VM? Anything with network devices, etc? I think it's going to be the reality soon for many people that they're going to need a BIOS based VM to get this to work.

Or maybe some way to separate the kubrick programs from the Linux distro, so the distro could be upgraded to work with UEFI?

Frogm4n · 08-14-2024, 03:16 PM

Kubrick is written in Java that's just as old as the distro it's running on. I don't think there's a lot of interest in it, but it might be less work overall to update it to a newer Java or rewrite it in a modern and more portable language.

Satyr118 · 09-26-2024, 01:49 PM

I hope someone makes this useable on newer hardware. I bought a second K4T after the first one bricked from trying a factory reset, and now the other one is bricked as well. I would love for these to not become more e-waste.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use regular DX(i) to debrick a DXG	craziskata	Kindle Developer's Corner	10	07-16-2013 09:10 AM
How to debrick a demo DXG?	xcomme	Kindle Developer's Corner	0	02-14-2013 04:06 PM
Trying to debrick, but connection keeps dropping	Zolyx	Kindle Developer's Corner	6	12-10-2012 08:04 AM
Help to Unbrick KT with simple debrick Method.	Loko_bielsa	Kindle Developer's Corner	2	07-16-2012 08:26 AM
A easy and offical way to debrick k3.	xueyou2	Kindle Developer's Corner	3	05-01-2012 09:42 AM

07-17-2023, 03:39 AM	#1216
tubular Junior Member Posts: 5 Karma: 10 Join Date: Jul 2023 Device: K4	Thanks a lot for developing this application. I used it to downgrade my K4 from 4.1.4 to 4.1.1 firmware, because I was receiving the "This device is not authorized as a test Kindle by the developer of this item" error. For future reference: on recent systems, the live USB refused to boot. Even a 2015 laptop didn't work. However, it worked flawlessly on a 2010 ThinkPad (T410s).

08-23-2023, 10:56 AM	#1217
ton4eff Junior Member Posts: 4 Karma: 10 Join Date: Dec 2019 Location: Bulgaria Device: Kindle 3	Also had to downgrade to 3.4 (K3 WiFi) because of the same "...test Kindle..." message. It was popping after every switch on of the WiFi and screwing my CoolReader installation. Thanks to Kubrick everything works flawlessly now. The workaround would be to prevent the Kindle to connect to internet while the WiFi is on, but I didn't know how to do it... And yes, I can confirm that USB also refused to boot Kubrick on my old Acer Aspire E1-531, but I did it using the CD image instead...

01-10-2024, 03:00 PM	#1218
PaigheTurn Member Posts: 23 Karma: 10 Join Date: Jan 2024 Device: Kindle 3 Wifi	I booted the USB and Im stuck at "Kubrick starting up, please wait..." Can someone give me advice? Im on an AMD Ryzen laptop in case that matters.

01-16-2024, 03:33 PM	#1219
tenko Junior Member Posts: 1 Karma: 10 Join Date: Jan 2024 Device: kindle touch	i recently screwed up, had a working kindle with duokan but stupidly decided to uninstall it just because windows didnt see my kindle (probably because as it turned out later it wont unless you use original cable...). ever since kindle is stuck at loading screen (progress bar loads till full but then nothing happens again after that, jsut stuck like that forever). so i wanted to install the firmware anew with kubrick. made the usb stick bootable drive according to the instruction. restarting windows to make it select bootable usb stick as boot - getting black screen with "checking for bootable device... no device detected" or similar same meaning text. just doesn't see this usb as a bootable drive. you sure this works for win11? i guess it would expect a windows or OS bootable drive, and this usb stick is not an OS bootable drive, maybe that's why this error? are people using kubrick with win11? i mean, with success right? i wonder what went wrong in my case. (i know how to make bootable usb sticks, reinstalled my system many times with usb stick bootables, but i never used that particular win32 program you suggested)

02-25-2024, 05:35 AM	#1220
XenGi Junior Member Posts: 1 Karma: 10 Join Date: Feb 2024 Device: Kindle Touch	I tried booting kubrick 3.6 on several notebooks now but with no luck. Does this even work anymore on modern hardware? Has any one tried it in recent days?

02-25-2024, 02:28 PM	#1221
Frogm4n Addict Posts: 245 Karma: 1600689 Join Date: Jul 2023 Device: Scribe, OA2, Glo HD, PRS-350	Kubrick is based on SliTaz 3.0, from ca. 2010. It's not going to have hardware support for modern hardware. You might be able to run it in a VM, but that's going to have its own kettle of fish to deal with.

08-12-2024, 11:11 PM	#1222
orev Junior Member Posts: 1 Karma: 10 Join Date: Aug 2024 Device: K5	I've tried to get Kubrick to boot on hardware, however BIOS boot is being removed from many devices now, and I can only use UEFI. The kubrick ISO doesn't support this, so I've been trying with VirtualBox (on Windows 11 host). My device is a Kindle Touch. Does anyone have the steps needed to get that working? I have setup a blank USB filter, so it should be catching any new USB device as they connect. I'm able to have it recognized and the USB downloader mode works, but then nothing happens on the Fastboot screen ("Waiting for device"). Are there other configs that need to be done on the VM? Anything with network devices, etc? I think it's going to be the reality soon for many people that they're going to need a BIOS based VM to get this to work. Or maybe some way to separate the kubrick programs from the Linux distro, so the distro could be upgraded to work with UEFI?

08-14-2024, 03:16 PM	#1223
Frogm4n Addict Posts: 245 Karma: 1600689 Join Date: Jul 2023 Device: Scribe, OA2, Glo HD, PRS-350	Kubrick is written in Java that's just as old as the distro it's running on. I don't think there's a lot of interest in it, but it might be less work overall to update it to a newer Java or rewrite it in a modern and more portable language.

09-26-2024, 01:49 PM	#1224
Satyr118 Junior Member Posts: 4 Karma: 10 Join Date: Apr 2023 Device: Kobo Mini N705	I hope someone makes this useable on newer hardware. I bought a second K4T after the first one bricked from trying a factory reset, and now the other one is bricked as well. I would love for these to not become more e-waste.