MobileRead Package Installer - Page 11

dd23 · 09-05-2019, 08:55 PM

Story time! Maybe it's useful for someone.

I got my PW3 in 2015 and decided to jailbreak it in 2016 cause I wanted the book cover screensaver. Worked just fine back then and in the process (or maybe later?) I also installed KUAL and MRPI.
I updated the firmware for my PW3 regularly and reinstalled KUAL, python and the screen saver every time.
At some point (starting with firmware 5.9.2 on the PW3) KUAL didn't survive the updates anymore and needed to be reinstalled with ;log mrpi. Fair enough, one more step but that's also easy.

Then came 2019 and I ran into the issue that packages couldn't be installed and were destroyed by MRPI. I installed the jailbreak hotfix and everything went back to normal.
(I did not check the logs back then, but I saw now that the problem was: Failed to parse package)

Today I updated to firmware 5.12.1 but wasn't able to install any packages cause they were destroyed by MRPI. Even the hotfix did not help. I almost panicked and thought that the new firmware had somehow removed or damaged the jailbreak.
I checked the MRPI logs and saw that the newest entry said Failed to extract package. However, the more surprising part was the line before, that contained [MRPI r13359]. MRPI was still the same old version I installed in October 2016! Downloading the newest MRPI version and unzipping it on my kindle was easy. Et voila, problem solved, packages installed

TL;DR: Update your MRPI!

Also: Thanks a lot NiLuJe and everyone else involved for your hard word and continuous dedication you put into the tools that you provide here for free. Really,

!

Rominams · 05-28-2021, 12:10 PM

I tried installing the package. I just get 'no packages found'. I got the last version from the snapshot page, copied the two directories, ejected, unplugged. then tried installing on my Kindle and that's where it went wrong. Can someone help me please ☺️. It's on my old touch not the PW.

aguy · 05-09-2022, 06:52 PM

Same for me! I have no Idea how to install this without kualand I can't get a working.bin file, even with kindletool, obfuscating the provided tarball

sarigabor · 12-24-2023, 01:06 PM

If I just want to run koreader, do I need to install MRPI as well, or is KUAL enough?

shamanNS · 12-24-2023, 03:24 PM

Well actually you use MRPI to install KUAL (booklet version)

sarigabor · 12-24-2023, 03:34 PM

Quote:

Originally Posted by shamanNS

Well actually you used MRPI to install KUAL (booklet version)

thank you

09-05-2019, 08:55 PM	#151
dd23 Junior Member Posts: 7 Karma: 180 Join Date: Sep 2019 Device: PW3	Don't forget to update your MRPI! Story time! Maybe it's useful for someone. I got my PW3 in 2015 and decided to jailbreak it in 2016 cause I wanted the book cover screensaver. Worked just fine back then and in the process (or maybe later?) I also installed KUAL and MRPI. I updated the firmware for my PW3 regularly and reinstalled KUAL, python and the screen saver every time. At some point (starting with firmware 5.9.2 on the PW3) KUAL didn't survive the updates anymore and needed to be reinstalled with ;log mrpi. Fair enough, one more step but that's also easy. Then came 2019 and I ran into the issue that packages couldn't be installed and were destroyed by MRPI. I installed the jailbreak hotfix and everything went back to normal. (I did not check the logs back then, but I saw now that the problem was: Failed to parse package) Today I updated to firmware 5.12.1 but wasn't able to install any packages cause they were destroyed by MRPI. Even the hotfix did not help. I almost panicked and thought that the new firmware had somehow removed or damaged the jailbreak. I checked the MRPI logs and saw that the newest entry said Failed to extract package. However, the more surprising part was the line before, that contained [MRPI r13359]. MRPI was still the same old version I installed in October 2016! Downloading the newest MRPI version and unzipping it on my kindle was easy. Et voila, problem solved, packages installed TL;DR: Update your MRPI! Also: Thanks a lot NiLuJe and everyone else involved for your hard word and continuous dedication you put into the tools that you provide here for free. Really, !

05-28-2021, 12:10 PM	#152
Rominams Junior Member Posts: 5 Karma: 10 Join Date: May 2021 Device: Kindle touch (K5) and Kindle PW3W	installing mrpi on kindle touch I tried installing the package. I just get 'no packages found'. I got the last version from the snapshot page, copied the two directories, ejected, unplugged. then tried installing on my Kindle and that's where it went wrong. Can someone help me please ☺️. It's on my old touch not the PW.

12-24-2023, 03:24 PM	#155
shamanNS Guru Posts: 998 Karma: 11500000 Join Date: Feb 2010 Location: Serbia Device: Kindle PW5, Kobo Libra 2, Kindle PW1	Well actually you use MRPI to install KUAL (booklet version) Last edited by shamanNS; 12-24-2023 at 05:30 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ISSUE: There is a problem with this Windows Installer package	Eggplantus	Calibre	5	04-14-2013 10:40 AM
0.8.4 new installer too slow	JSWolf	Calibre	6	06-04-2011 12:29 PM
Changes to Installer???	kgn	Calibre	29	01-23-2011 11:40 AM
Invalid Windows Installer Package (7.4)	Sydney's Mom	Calibre	4	01-15-2011 02:28 PM
iLiad So ... any chance for an installer-package for FBReader 10?	X. Trapnel	iRex Developer's Corner	3	06-04-2009 09:32 PM

05-09-2022, 06:52 PM	#153
aguy Junior Member Posts: 9 Karma: 10 Join Date: May 2022 Device: pw	Same for me! I have no Idea how to install this without kualand I can't get a working.bin file, even with kindletool, obfuscating the provided tarball

12-24-2023, 01:06 PM	#154
sarigabor Enthusiast Posts: 33 Karma: 30 Join Date: Mar 2019 Location: Hungary Device: Onyx Boox Page	If I just want to run koreader, do I need to install MRPI as well, or is KUAL enough?