![]() |
#766 | |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 6,111
Karma: 34000001
Join Date: Mar 2008
Device: KPW1, KA1
|
Quote:
- I had a bunch of books on the device so I didn't need to sideload yet - The KA1 has no buttons 4.31 (somehow) seems to have massively improved both the refresh/page-flip speed of the reader and the touch accuracy. The latter is one thing which has annoyed me since I had the KA1; slower and less accurate than my 2012 Paperwhite. Therefore I wouldn't want to return to 4.20; even though I now have to reboot to activate the dark mode. (Fortunately I don't really need it that often.) I'll look into 4.32. I wonder if Kobo will ever learn. It was like this 6 years ago. I would have assumed that their software would have been improved / rewritten to the point that adding a new functionality would not break other functions. |
|
![]() |
![]() |
![]() |
#767 | |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,847
Karma: 22003124
Join Date: Aug 2014
Device: Kobo Forma, Kobo Sage, Kobo Libra 2
|
Quote:
Kobo does have a beta testing group, but even with this they’re not going to catch every issue. There are too many variables outside of Kobos control. Namely the computer the kobo device is plugged into. And as has been mentioned a lot 4.31s bugs didn’t even affect everyone on this forum. |
|
![]() |
![]() |
![]() |
#768 | |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
Quote:
Historically, killing Wi-Fi on NTX boards entailed powering it down, too (probably for power efficiency reasons), so powering the WI-Fi chip was somewhat fairly heavily tied with enabling Wi-Fi ![]() Which means that making the two *distinct* UI-wise is tricky: you'd have to uncouple toggling Wi-Fi power from toggling Wi-Fi connection (which probably entails mostly always leaving the chip powered on, which is... meh', especially on a board that already suffers from terrible power management. Ironically enough, that BT+Wi-Fi chip might be the most power efficient thing in there ![]() |
|
![]() |
![]() |
![]() |
#769 | |
the rook, bossing Never.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 12,241
Karma: 89531599
Join Date: Jun 2017
Location: Ireland
Device: All 4 Kinds: epub eink, Kindle, android eink, NxtPaper11
|
Quote:
I've ONLY EVER seen this issue on FW 4.3x.x of Kobos. It can quite easily be sorted. If it's a design decision, it's unique to Kobo. It's absolutely not a kernel or chip issue that stops the Kobo Sage, Libre 2 and Elipsa from turning on or off BT or simply showing status and making sure the WiFi state is whatever it was last set to by the user. It absolutely uses more power to have both on. I've no objection to people leaving WiFi on, but EVERY maker other than Kobo (that I know) doing any ereader, phone, Laptop or Tablet with WiFi and BT, running Linux, Windows or Android lets the user control WiFi & BT independently. I've 3 x Android phones, 4 x models Android tablets, Boyue Mars eink, played with Kindle PW4 and set up more models of Laptop than I can count with Linux. All control BT & WiFi separately from the user point of view. Actually many of the WiFi + BT chips also have FM radio, but Apple disables that because they have no earphone socket; the earphone cable is used as the FM aerial, oddly even on my 10" tablet which is big enough to have an internal FM aerial. No doubt Kobo has made all kinds of excuses for the bizarre 4.30 & 4.31, at least the 4.32 is usuable as you can look at BT setting without risk and you can turn off the WiFi. The 4.28.x was certainly unfinished GUI on the Elipsa as there was no real indication if BT was on or off and it wasn't properly done at all. No doubt in the next FW release KOBO will finally have an indicator on the icon bar beside WiFi and fix the bug, because no matter what they call it, it is a bug. I'd also like the WiFi & BT icons on the tool bar like * (light) and Aa is when you are reading and tap the page. WiFi on/off used to be accessible there. |
|
![]() |
![]() |
![]() |
#770 | |
the rook, bossing Never.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 12,241
Karma: 89531599
Join Date: Jun 2017
Location: Ireland
Device: All 4 Kinds: epub eink, Kindle, android eink, NxtPaper11
|
Quote:
Actually a lot of BT speakers and other gadgets actually have the WiFi in the BT chip, but just disabled. |
|
![]() |
![]() |
![]() |
#771 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
Never have I said that this wasn't an NTX quirk, but the fact is that the kernel begs to differ:
Code:
static void _ntx_wifi_bt_power_ctrl (int power_status) { int bus; int iOldStatus; iOldStatus = gi_wifi_power_status; //if (14 == gptHWCFG->m_val.bCPU) // B300 { printk("Wifi / BT power control %d\n", power_status); if (power_status & 0x3) { printk("wifi/BT power on\n"); sunxi_wlan_set_power(1); } /* Bluetooth power control */ if (0 != gptHWCFG->m_val.bBT) { if ((power_status & 0x2) == (iOldStatus & 0x2)) { /* Bluetooth dis status */ printk("Bluetooth already %s.\n",(power_status & 0x2)?"on":"off"); } else if (power_status & 0x2) { printk("Bluetooth On\n"); sunxi_bluetooth_set_power(1); gi_wifi_power_status |= 2; } else { printk("Bluetooth Off\n"); gi_wifi_power_status &= ~2; } } /* Wifi power control */ printk(KERN_ERR"[DEBUG] power_status:%d , iOldStatus:%d \n",power_status,iOldStatus); if ((power_status & 0x1) == (iOldStatus & 0x1)) { /* check Wifi status */ printk ("Wifi already %s.\n",(power_status & 0x1)?"on":"off"); } else if (power_status & 0x1) { printk("Wifi On\n"); //gpiod_direction_output(GPIO_WIFI_RST, 1); gi_wifi_power_status |= 1; } else { printk("Wifi Off\n"); gi_wifi_power_status &= ~1; } //printk("Wifi/BT bus:%d \n",bus); bus = sunxi_wlan_get_bus_index() ; if( power_status&0x3 ) { if ( (!!power_status) != (!!iOldStatus) ) { sunxi_wlan_set_dis(1); /* Wifi dis pull high */ //printk("sunxi_mmc_rescan_card !!\n"); msleep(300); printk(KERN_DEBUG" sunxi_mmc_rescan_card bus%d!!\n",bus); sunxi_mmc_rescan_card(bus); msleep(300); } } else if ( 0==power_status ) { if ( power_status != iOldStatus ) { sunxi_wlan_set_dis(0); /* Wifi dis pull low */ printk(KERN_DEBUG" remove card bus%d!!\n",bus); sunxi_mmc_set_card_removed(bus); msleep(300); } } if (0 != gptHWCFG->m_val.bBT) { if ( !(power_status&2) ) { sunxi_bluetooth_set_power(0); //printk("bt off\n"); } } if(0==power_status) { printk("wifi/bt device power off\n"); sunxi_wlan_set_power(0); sunxi_mmc_set_card_removed(bus); msleep(300); } } //printk("%s() : done \n",__FUNCTION__); } Keep in mind that I want to make the distinction between powering (hw/sw) and enabling (ui) and connecting (hw/sw/ui) very clear, as the three could theoretically be distinct. Last edited by NiLuJe; 04-16-2022 at 06:39 PM. |
![]() |
![]() |
![]() |
#772 | |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 24,905
Karma: 47303822
Join Date: Jul 2011
Location: Sydney, Australia
Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos
|
Quote:
I can state that my Glo is working with all of the recent firmware versions. It only has a 2GB card in it. That is not the original as that failed some time ago. I only use it for testing, but, it is working correctly. As to a corrupt database, the symptoms you describe are symptoms of a corrupt database. What happens when the database becomes corrupt depends on exactly how it is corrupt. The device can run for a long time with a corrupt database, it just can't save changes such as reading position. These will be lost either when the device is restarted or as more books are opened. |
|
![]() |
![]() |
![]() |
#773 | |
Junior Member
![]() Posts: 6
Karma: 10
Join Date: Apr 2022
Device: Kobo Glo
|
Quote:
This Show how to use https://www.mobileread.com/forums/sh...d.php?t=309576 And this too https://www.reddit.com/r/kobo/commen...m_source=share I have the 128gb works fine after factory reset. Perhaps the error Was through the Partition extend. The only 2 errors was the 4 last reading books in the home screen and the stand by picture of the reading book. I had 64gb intern more then a year without probs and now the 128gb which works without problems after the reset ![]() Gesendet von meinem SM-G991B mit Tapatalk |
|
![]() |
![]() |
![]() |
#774 |
Junior Member
![]() Posts: 4
Karma: 10
Join Date: Jun 2022
Device: Kobo Libra 2
|
Japanese dictionary PDF support.
I sent a DM to the Kobo Help team on twitter about this and is supposedly with the development team but decided to post here just in case someone sees this. Worth a try.
I use my device in Japanese and when using my kobo with PDF files, when using a dictionary in words, I cant select the whole word. Long pressing a word, only shows me the definition of one character and not the entire word. This works with epubs books normally because I can select the word appropriately, however with pdf it doesn't give me an option to select the size of the word. Following is a quick video demonstrating this. With epubs, regardless of the orientation, I can select the size of the word appropriately. As seen here Would love to see this fixed since even though I used a PDF file with pictures and selectable text, it doesn't work with a pdf file with pure text. Thanks in advance and sorry for my poor english. Last edited by abikyoukan; 06-07-2022 at 06:02 PM. |
![]() |
![]() |
![]() |
#775 | |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 24,905
Karma: 47303822
Join Date: Jul 2011
Location: Sydney, Australia
Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos
|
Quote:
|
|
![]() |
![]() |
![]() |
Tags |
firmware, firmware release |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Firmware Update Instructions and the latest Firmware Versions | mitchwah | Ectaco jetBook | 113 | 10-24-2023 09:02 PM |
Nouveau firmware firmware 6.5.765 pour la Inkpad 3/PB740 | mooms | PocketBook | 0 | 11-08-2021 08:23 AM |
Firmware Update Kindle firmware 5.12.1 | eilon | Amazon Kindle | 102 | 09-26-2019 08:38 PM |
Firmware glitch - typing text slow on some firmware+device combinations | mdp | Onyx Boox | 11 | 11-11-2017 12:48 AM |
Firmware 2.0.3 Pocketbook IQ - another firmware is release for IQ | tvpupsik | PocketBook | 26 | 12-13-2010 03:03 PM |