04-18-2011, 04:53 PM | #1 |
Junior Member
Posts: 1
Karma: 10
Join Date: Apr 2011
Device: irex ds1000
|
Dr1000s No memory card found
Yesterday, I got the following message on my irex NO Memory Card Found for the first time. I have reinserted the sd card, recharged the machine and also put in a new sd card but to no avail. Any suggestions would be appreciated.
|
04-19-2011, 03:19 AM | #2 |
Guru
Posts: 999
Karma: 19985
Join Date: Dec 2008
Location: Netherlands
Device: iRex DR1000S
|
There has been someone before on this forum reporting that the card-reader inside the DR mechanically was broken. I do not remember the outcome anymore, you could try to search this forum for the old messages.
|
04-19-2011, 04:47 AM | #3 |
ex-IRX developer
Posts: 158
Karma: 224
Join Date: Oct 2008
Device: Irex DR800S, DR1000S, iLiad
|
There is a slight change that the device fails to mount the card because the internal file system is not correct. Installation of a firmware update should fix this.
Last edited by Gertjan; 04-20-2011 at 06:04 AM. Reason: removed incorrect link to avoid confusion. correct link is below. |
04-19-2011, 03:39 PM | #4 | |
Guru
Posts: 999
Karma: 19985
Join Date: Dec 2008
Location: Netherlands
Device: iRex DR1000S
|
Quote:
You are pointing to the latest R1.7.1 firmware not to R2.0rc3 is there a specific reason for that? Latest Beta: http://updates.irexnet.com/beta/dr10...r1000s-rc3.zip Marcel. |
|
04-14-2020, 01:03 PM | #5 |
Member
Posts: 15
Karma: 10
Join Date: Jan 2012
Device: DR1000
|
update-dr1000s-rc3.zip (49.3MB)
https://drive.google.com/drive/folde...2tlbGVCY0tiLUk Manual Download and Install for all operating systems You will have to manually download and extract the firmware update onto your SD card. Please follow these steps: 1. Download http://updates.irexnet.com/embedded/dr1000/latest.zip 2. Extract/copy the contents of this file to the root of your SD card (either while connected via USB, or by putting the SD card into your PC’s card reader). Make sure that the System folder in the ZIP is extracted to the root of the card, creating a folder called ‘update’ inside your current System folder on the SD card. 3. Put the SD card into your device or disconnect the USB cable. 4. The device will detect the new firmware and ask to install it. Choose [Yes]. * 5. The update procedure will start and automatically complete, your device will reboot with the new firmware. 6. You can verify the new firmware version in Settings > About. Last edited by papata; 04-14-2020 at 01:19 PM. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Only internal memory of 602 found but not scanned | niji | Calibre | 0 | 01-07-2011 04:09 PM |
Transferring from Main Memory to Memory Card | Modern Bear | Sony Reader | 3 | 12-13-2009 07:40 AM |
What type pf SD card does the DR1000S use? | physics@war | iRex | 11 | 05-20-2009 05:40 PM |
memory card to main memory copy | alexxxm | Sony Reader Dev Corner | 1 | 09-01-2008 12:04 PM |
Moving files from memory card to main memory | dhbailey | Sony Reader | 2 | 03-12-2007 12:43 PM |