Jinke Hanlin A9 firmware

diveerse · 01-29-2012, 04:06 PM

Hi, can you please tell me what the firmware is used to Jinka Hanlin A9? I was reading here and I found nothing much

thank you very much

DaleDe · 01-29-2012, 07:39 PM

Check our wiki on the Hanlin A9. there is lots of information and a link to the Jinke site for additional information. The firmware on all the Hanlin devices have similar capability. What specifically are you looking for?

diveerse · 01-30-2012, 09:41 AM

Quote:

Originally Posted by DaleDe

Check our wiki on the Hanlin A9. there is lots of information and a link to the Jinke site for additional information. The firmware on all the Hanlin devices have similar capability. What specifically are you looking for?

Thank you in advance for your answer. Perhaps you mean this page
https://wiki.mobileread.com/wiki/Hanlin_A9
But a link to download and see home page jinke.com I'm not seeing.
I need to solve the "hyphenation" if the good writing. This should solve the firmware, but I do not know which to use on your Hanlin A9 Jinky me to not upload a bad mistake.
Can you please advise which alternative firmware is that correct? thank you
And excuse my English

DaleDe · 01-30-2012, 03:04 PM

I too am having trouble reaching the Jinke site. It you can reach it then you can download the latest firmware from the site. Alternately any A9 firmware will work so if you can find a supplier you can get their latest firmware. Hanlin devices don't always do the best hyphenation in my experience so I usually turn it off. Part of the formats such as FB2 use an on board copy of Cool Reader. It is possible to replace that executable with another version on some Hanlin devices, if you wanted to go that route but it would only solve hyphenation on formats that Cool Reader supports. And even Cool Reader may not do as good a hyphenation as you might like. Again, just turn it off if you don't like it.

Dale

diveerse · 01-30-2012, 03:19 PM

I look at it as meaning. But somehow I did not read that the firmware is suitable for A9. Alternative. Tirwal or perhaps mentioned Cool Reader? I'm not stupid, but I'd hate to destroy the reader.

DaleDe · 01-30-2012, 06:36 PM

Quote:

Originally Posted by diveerse

I look at it as meaning. But somehow I did not read that the firmware is suitable for A9. Alternative. Tirwal or perhaps mentioned Cool Reader? I'm not stupid, but I'd hate to destroy the reader.

An Alternative firmware must as A9 to work. However, there can be downloads of an application onto the existing firmware. I am not sure there is a version for the A9 but Cool Reader does have existing updates for other Hanlin devices.

Dale

diveerse · 01-31-2012, 10:30 AM

So I solved so that I used to hyphenate Liberation Mono font that I have downloaded. I have firmware version 1.00.201107141749 aserial, so wait until they go Web site and hopefully there will be newer, which it probably will address

01-29-2012, 04:06 PM	#1
diveerse Junior Member Posts: 4 Karma: 10 Join Date: Jan 2012 Device: Jinke Hanlin A9	Jinke Hanlin A9 firmware Hi, can you please tell me what the firmware is used to Jinka Hanlin A9? I was reading here and I found nothing much thank you very much

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jinke Hanlin A9 or PocketBook 902?	SelinaK	Which one should I buy?	9	06-23-2011 05:45 PM
Welcome to the Hanlin (Jinke) forum	DaleDe	HanLin eBook	1	05-03-2010 12:04 PM
Hanlin Jinke v3 and fonts: epub?	RootlessAgrarian	HanLin eBook	2	01-09-2010 02:41 PM
Jinke Hanlin reader: What do you want to know?	Alexander Turcic	HanLin eBook	0	03-20-2006 09:11 AM
Hands-on Review: Jinke Hanlin	luag	HanLin eBook	4	03-17-2006 12:17 AM

01-29-2012, 07:39 PM	#2
DaleDe Grand Sorcerer Posts: 11,470 Karma: 13095790 Join Date: Aug 2007 Location: Grass Valley, CA Device: EB 1150, EZ Reader, Literati, iPad 2 & Air 2, iPhone 7	Check our wiki on the Hanlin A9. there is lots of information and a link to the Jinke site for additional information. The firmware on all the Hanlin devices have similar capability. What specifically are you looking for?

01-30-2012, 03:04 PM	#4
DaleDe Grand Sorcerer Posts: 11,470 Karma: 13095790 Join Date: Aug 2007 Location: Grass Valley, CA Device: EB 1150, EZ Reader, Literati, iPad 2 & Air 2, iPhone 7	I too am having trouble reaching the Jinke site. It you can reach it then you can download the latest firmware from the site. Alternately any A9 firmware will work so if you can find a supplier you can get their latest firmware. Hanlin devices don't always do the best hyphenation in my experience so I usually turn it off. Part of the formats such as FB2 use an on board copy of Cool Reader. It is possible to replace that executable with another version on some Hanlin devices, if you wanted to go that route but it would only solve hyphenation on formats that Cool Reader supports. And even Cool Reader may not do as good a hyphenation as you might like. Again, just turn it off if you don't like it. Dale

01-30-2012, 03:19 PM	#5
diveerse Junior Member Posts: 4 Karma: 10 Join Date: Jan 2012 Device: Jinke Hanlin A9	I look at it as meaning. But somehow I did not read that the firmware is suitable for A9. Alternative. Tirwal or perhaps mentioned Cool Reader? I'm not stupid, but I'd hate to destroy the reader.

01-31-2012, 10:30 AM	#7
diveerse Junior Member Posts: 4 Karma: 10 Join Date: Jan 2012 Device: Jinke Hanlin A9	So I solved so that I used to hyphenate Liberation Mono font that I have downloaded. I have firmware version 1.00.201107141749 aserial, so wait until they go Web site and hopefully there will be newer, which it probably will address