Calibre 0.5.0 crashes on startup

gilamon · 03-09-2009, 11:54 PM

I installed 0.5.0 on a Vista SP1 machine. On first install it launched fine and I pointed it a folder on my server with my book and database. (Not sure which previous version of Calibre I was running.)

It ran fine until I tried to add a book to the library at which point it gave me a database locked error and crashed. Since then it won't start. When I try to start it Task Manager shows it opening and then it crashes almost immediately.

I uninstalled and reinstalled it and it still does the same thing.

Any ideas?

Thanks in advance.

RickyMaveety · 03-10-2009, 12:26 AM

Quote:

Originally Posted by gilamon

I installed 0.5.0 on a Vista SP1 machine. On first install it launched fine and I pointed it a folder on my server with my book and database. (Not sure which previous version of Calibre I was running.)

It ran fine until I tried to add a book to the library at which point it gave me a database locked error and crashed. Since then it won't start. When I try to start it Task Manager shows it opening and then it crashes almost immediately.

I uninstalled and reinstalled it and it still does the same thing.

Any ideas?

Thanks in advance.

It wouldn't run on my Vista SP1 machine either. Wish I could give you some suggestions, but I'm in the same boat.

desertgrandma · 03-10-2009, 01:01 AM

well, crap..I'm in the midst of installing it right now on my Vista .......will let you know if I have any problems......

kovidgoyal · 03-10-2009, 01:39 AM

If you run it from a command prompt as

calibre-debug -g

what error message do you get

desertgrandma · 03-10-2009, 01:44 AM

Quote:

Originally Posted by desertgrandma

well, crap..I'm in the midst of installing it right now on my Vista .......will let you know if I have any problems......

Have added 5 books, and so far, no problems. Have closed it and opened it twice.

My only problem is that I screwed up somewhere and for some reason it isn't showing in the 'Calibre' file I opened for it.........its on my taskbar tho, so I guess thats okay.........

RickyMaveety · 03-10-2009, 11:58 AM

I'm glad you were able to get it to run, DG. I uninstalled it and finally deleted it after several attempts with no success.

Kovid's theory is that it's AV software that I don't have running or installed interfering with Calibre. Wish that were true, it would be an easy fix.

gilamon · 03-10-2009, 04:25 PM

Here's what came back.

"C:\Program Files\calibre>calibre-debug -g
link hasn't been detected!
link hasn't been detected!
Traceback (most recent call last):
File "debug.py", line 147, in <module>
File "debug.py", line 120, in main
File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 1582, i
n main
File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 80, in
__init__
File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 1413, i
n read_settings
File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 1409, i
n initialize_database
File "os.pyo", line 157, in makedirs
WindowsError: [Error 3] The system cannot find the path specified: V:\\"

kovidgoyal · 03-10-2009, 04:28 PM

You put your library on a removable disk which is no longer present?

Start calibre from a terminal as

calibre --with-library c:\path\to\new\library\folder

gilamon · 03-10-2009, 05:28 PM

Quote:

Originally Posted by kovidgoyal

You put your library on a removable disk which is no longer present?

Start calibre from a terminal as

calibre --with-library c:\path\to\new\library\folder

Originally I had it pointed to a folder on my server which may have disconnected and caused the initial crash. The problem is I can't get the app to start to point it someplace else even after I uninstalled and reinstalled it.

I tried the with-library command above. It looked like it ran and dropped me back into the command prompt. However when I try to run Calibre it still behaves the same way.

Is there a config file I should delete that will let it start up without pointing to the old location?

desertgrandma · 03-10-2009, 05:31 PM

Quote:

Originally Posted by RickyMaveety

I'm glad you were able to get it to run, DG. I uninstalled it and finally deleted it after several attempts with no success.

Kovid's theory is that it's AV software that I don't have running or installed interfering with Calibre. Wish that were true, it would be an easy fix.

I installed and uninstalled 3 times before I had success. Of course, it was totally operator error.....do you know what happens when you install it to 'desktop'? You get little files all over your desktop!

anyway, after uninstalling, and re-installing, its working the way it should......with one little glitch. The books I'm putting in won't open. Says they're drm'd. Which they aren't. Its something in what I"m doing, I'm sure. Since I've just started, I'll keep playing around with it.

One thing I like the most is to be able to specify which number in a series the book is.

kovidgoyal · 03-10-2009, 06:03 PM

@DG what format of books are you putting in?

desertgrandma · 03-10-2009, 06:10 PM

Quote:

Originally Posted by kovidgoyal

@DG what format of books are you putting in?

I have a folder with books that have been de-drmed and mobi2mobi'd to fix title/author. I know these books aren't drm'd, because I tried emailing them and they opened fine.

None will open.

So I tried inserting a 'revbooktitle' book, and it did open.

But it won't let me mess with the meta data. Any title I choose won't 'fetch.

RickyMaveety · 03-10-2009, 07:59 PM

Quote:

Originally Posted by desertgrandma

I installed and uninstalled 3 times before I had success. Of course, it was totally operator error.....do you know what happens when you install it to 'desktop'? You get little files all over your desktop!

anyway, after uninstalling, and re-installing, its working the way it should......with one little glitch. The books I'm putting in won't open. Says they're drm'd. Which they aren't. Its something in what I"m doing, I'm sure. Since I've just started, I'll keep playing around with it.

One thing I like the most is to be able to specify which number in a series the book is.

Yeah .... that's the thing I'd like most to use it for as well. But, since I just don't have the time to keep trying to install it (again and again), I'm just giving up for now.

I know that's "not like me" but seriously ... with all the things going on around me at the moment and the drugs (gotta love the drugs!!), there's only so much troubleshooting I can do.

Drugs or not, however, there is no AV running on this laptop, and UCA is turned ever so off ....

Must conserve energy ... have huge blog post to write tonight.

kovidgoyal · 03-10-2009, 09:18 PM

Quote:

Originally Posted by desertgrandma

I have a folder with books that have been de-drmed and mobi2mobi'd to fix title/author. I know these books aren't drm'd, because I tried emailing them and they opened fine.

None will open.

So I tried inserting a 'revbooktitle' book, and it did open.

But it won't let me mess with the meta data. Any title I choose won't 'fetch.

Email me one of these books kovid at kovidgoyal. net...

MsAstoria · 03-10-2009, 09:55 PM

Think I will hold off on installing 5 on my Vista computer, and see if Kovid puts out an updated version in a few days. Calibre is ever evolving and really is nice for downloading newspaper versions. I'm not putting any new books on the K2 until I get some of these read!
MUST READ.....

03-09-2009, 11:54 PM	#1
gilamon Member Posts: 10 Karma: 10 Join Date: Nov 2008 Device: PRS-505	Calibre 0.5.0 crashes on startup I installed 0.5.0 on a Vista SP1 machine. On first install it launched fine and I pointed it a folder on my server with my book and database. (Not sure which previous version of Calibre I was running.) It ran fine until I tried to add a book to the library at which point it gave me a database locked error and crashed. Since then it won't start. When I try to start it Task Manager shows it opening and then it crashes almost immediately. I uninstalled and reinstalled it and it still does the same thing. Any ideas? Thanks in advance.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calibre crashes in windows on startup	Jamz	Calibre	12	09-17-2010 03:58 PM
Calibre Crashing on STartup in OSX 10.6.2	bbusybookworm	Calibre	9	09-17-2010 12:18 PM
Calibre 0.6.10 GUI crashes on startup	Wagenius	Calibre	1	09-03-2009 02:53 AM
Calibre startup with tags already applied ?	Yompan	Calibre	2	07-29-2009 10:20 AM
Frustrated by Calibre startup- freezes	Arek_W	Calibre	4	10-15-2008 06:23 AM

03-10-2009, 01:01 AM	#3
desertgrandma Enjoying the show.... Posts: 14,270 Karma: 10462843 Join Date: Jun 2008 Location: Arizona Device: A K1, Kindle Paperwhite, an Ipod, IPad2, Iphone, an Ipad Mini & macAir	well, crap..I'm in the midst of installing it right now on my Vista .......will let you know if I have any problems......

03-10-2009, 01:39 AM	#4
kovidgoyal creator of calibre Posts: 44,843 Karma: 26594666 Join Date: Oct 2006 Location: Mumbai, India Device: Various	If you run it from a command prompt as calibre-debug -g what error message do you get

03-10-2009, 11:58 AM	#6
RickyMaveety Holy S**T!!! Posts: 5,213 Karma: 108401 Join Date: Jun 2008 Location: San Diego, California!! Device: Kindle and iPad	I'm glad you were able to get it to run, DG. I uninstalled it and finally deleted it after several attempts with no success. Kovid's theory is that it's AV software that I don't have running or installed interfering with Calibre. Wish that were true, it would be an easy fix.

03-10-2009, 04:25 PM	#7
gilamon Member Posts: 10 Karma: 10 Join Date: Nov 2008 Device: PRS-505	Here's what came back. "C:\Program Files\calibre>calibre-debug -g link hasn't been detected! link hasn't been detected! Traceback (most recent call last): File "debug.py", line 147, in <module> File "debug.py", line 120, in main File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 1582, i n main File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 80, in __init__ File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 1413, i n read_settings File "C:\Program Files\calibre\library.zip\calibre\gui2\main.py", line 1409, i n initialize_database File "os.pyo", line 157, in makedirs WindowsError: [Error 3] The system cannot find the path specified: V:\\"

03-10-2009, 04:28 PM	#8
kovidgoyal creator of calibre Posts: 44,843 Karma: 26594666 Join Date: Oct 2006 Location: Mumbai, India Device: Various	You put your library on a removable disk which is no longer present? Start calibre from a terminal as calibre --with-library c:\path\to\new\library\folder

03-10-2009, 06:03 PM	#11
kovidgoyal creator of calibre Posts: 44,843 Karma: 26594666 Join Date: Oct 2006 Location: Mumbai, India Device: Various	@DG what format of books are you putting in?

03-10-2009, 09:55 PM	#15
MsAstoria Evangelist Posts: 423 Karma: 47344 Join Date: Jan 2009 Location: Astoria, Oregon, USA Device: Kindle Fire HDX, iPhone (yes, I read on my phone)	Think I will hold off on installing 5 on my Vista computer, and see if Kovid puts out an updated version in a few days. Calibre is ever evolving and really is nice for downloading newspaper versions. I'm not putting any new books on the K2 until I get some of these read! MUST READ.....

Advert

Advert