![]() |
#1 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 21
Karma: 95336
Join Date: Sep 2012
Device: PRS-350, Kindle 4 NT (wifi), Kindle 5 (3g + wifi)
|
[Solved] Trying to enable 3g on Kindle Touch
I have a Kindle 4 Touch. It is the model with wifi + 3g. 3g was working on it earlier but since I'm a tinkerer I used Kubrick on it. After using Kubrick 3g is unable to connect.
It is a known problem, this issue has been discussed before on this thread... https://www.mobileread.com/forums/sho...d.php?t=195975 From reading that thread we're led to believe that modifying two files would lead the 3g to connect again. Both the files reside in /etc/kdb.src/yoshi/system/daemon/cmd/interfaces/interface2 ixtab suggested using vi to edit the files, twobob suggested using nano and being that nano is not included on the Kindle by default he made some other suggestions. At this point ixtab put forth two commands using the powerful command sed that would modify the files in question "on the go" instead of using vi or nano. The commands in question that he suggested were Code:
sed -i -e 's/^0$/1/' /etc/kdb.src/yoshi/system/daemon/cmd/interfaces/interface2/hw_present sed -i -e 's/^1$/0/' /etc/kdb.src/yoshi/system/daemon/cmd/interfaces/interface2/force_down Well at this point, I'm a bit out of my water and instead of cluttering the other thread about using Kubrick I thought I'd create another separate thread about getting 3g functionality back on my device. On the other thread about this issue is also a link to Kindle firmware images. Apparently on the 5.0.0 image 3g is fine but on ixtab's 5.1.2+extras image 3g is broken. I've thought about flashing the 5.0.0 image to the Kindle Touch wifi + 3g in the hopes of getting it back in fully functional condition... but I'm new to the Kindle scene and am not aware of how to flash a firmware image to the Kindle outside of Kubrick. Any and all thoughts are welcome. Last edited by kolosus; 03-22-2013 at 01:12 AM. |
![]() |
![]() |
![]() |
#2 | |
(offline)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,907
Karma: 6736094
Join Date: Dec 2011
Device: K3, K4, K5, KPW, KPW2
|
Please call it Kindle Touch, or Kindle 5 Touch. It's a Kindle 5
![]() Quote:
You will need to modify the main partition, not the diags one. So, mount /dev/mmcblk0p1 /mnt/mmc/, and perform the commands in /mnt/mmc/etc/ ... |
|
![]() |
![]() |
Advert | |
|
![]() |
#3 |
(offline)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,907
Karma: 6736094
Join Date: Dec 2011
Device: K3, K4, K5, KPW, KPW2
|
Oh, while we're at it: is your K4 also a Wifi+3G version? If so, would you mind making an image of the main partition so I can try to understand how it's solved there?
|
![]() |
![]() |
![]() |
#4 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 21
Karma: 95336
Join Date: Sep 2012
Device: PRS-350, Kindle 4 NT (wifi), Kindle 5 (3g + wifi)
|
Thank you so much ixtab for your help. My Kindle 5 has 3g again! I didn't know about it being the Kindle 5, for some reason I thought it was still the Kindle 4 but with Touch interface. I guess my confusion started when I was dealing with the Kindle 4 and it was referred everywhere as the Kindle 4 NT. Why refer to it as the NT version when by definition the 4 is non touch while the touch version is not 4 but 5! Well I'll leave that battle for another day.
I did modify the code that you so generously provided but only slightly. I used... Code:
mount /dev/mmcblk0p1 /mnt/mmc/ cd /mnt/mmc/ sed -i -e 's/^0$/1/' ./etc/kdb.src/yoshi/system/daemon/cmd/interfaces/interface2/hw_present sed -i -e 's/^1$/0/' ./etc/kdb.src/yoshi/system/daemon/cmd/interfaces/interface2/force_down As for my Kindle 4. It is a wifi only version. As I understand it the 3g versions are a dying breed. Sorry. Wish I could've helped after your monumental efforts in helping me out. BTW, I wrote the code out on this thread as I used it to get 3g back just in case someone else had this problem and wanted to use it without trying to figure out what/how it was done. As you'd mentioned, the next iteration of Kubrick should make this thread obsolete. |
![]() |
![]() |
![]() |
#5 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
Okay. Glad you got it sorted.
You can see now why it is so important to us to have peoples device types correctly listed in their profile. Saves a LOT of time and head-scratching. Be well. Happy days to you! |
![]() |
![]() |
Advert | |
|
![]() |
Thread Tools | Search this Thread |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem to exit ENABLE DIAGS in kindle touch | luis_ox | Amazon Kindle | 7 | 08-04-2012 08:01 PM |
Enable Bluetooth on Rooted Simple Touch | hard_boiled | Nook Developer's Corner | 7 | 02-29-2012 04:55 AM |
Touch how to enable third-party input method in rooted nook touch | tigerszheng | Barnes & Noble NOOK | 5 | 10-24-2011 08:30 PM |
How to enable Text To Speech when you create a Kindle ebook? | Stodder | Kindle Formats | 4 | 05-25-2011 06:25 PM |
Would it be possible to hack a Canadian Kindle 2 to enable web browsing? | wayner | Kindle Developer's Corner | 4 | 03-22-2010 06:33 AM |