iLiad Hub/Charger compatible over V1 and V2?

onkl · 12-17-2011, 06:47 PM

Hi all,

I currently own an Illiad V1, with very limited capacities (old firmware, too old to upgrade in IDS).
I'm considering an offer for an Iliad V2, which comes without charger. Does anyone know if I can use my current V1 charger/hub on a Iliad V2 (Both for charging as for ethernet/USB)?

Thanks.

ericshliao · 12-18-2011, 02:19 AM

Perhaps you can download a firmware image and upgrade iLiad firmware offline.

janzen · 12-18-2011, 05:14 AM

You can use the V1 charger on a V2 Iliad, both for charging as for ethernet/USB.
There is however hardly, if any difference in capacities between the two versions.

onkl · 12-23-2011, 05:28 AM

Thanks a lot, both.

Quote:

Originally Posted by janzen

You can use the V1 charger on a V2 Iliad, both for charging as for ethernet/USB.
There is however hardly, if any difference in capacities between the two versions.

I know the versions are almost identical, I'm not considering the V2 because it is a V2, but because it is on offer cheap, due to the lack of a working adapter.

My current Iliad is on firmware 2.7 (Basically: No power management possible, only pdf is supported, not supported by iDS etc.)
I'm not very capable in messing around with firmware (well, to be frank: I'm quite capable in messing around, but in general I'm not that happy with the result...), so I'm considering to buy this one as the lazy option to obtain the later added SW-functions.

Shaggy · 12-27-2011, 06:06 PM

The charger should work, there's no difference between the v1 and v2 as far as the charger.

iDS seems to be down though, so make sure that the v2 has a current firmware on it. Chances of being able to update it are slim.

There's a zip file available that contains the 2.10 firmware. I'm not 100% sure, but I think you could get that and flash your v1 with it (just not sure if there is anything about the 2.7 firmware that would prevent it). The latest firmware is 2.12 though, which isn't easily available now that iDS seems to be gone. The v2 should have at least 2.11 on it, probably 2.12. I'd check with the seller though.

12-17-2011, 06:47 PM	#1
onkl Junior Member Posts: 2 Karma: 10 Join Date: Sep 2011 Device: iRex Iliad	Hub/Charger compatible over V1 and V2? Hi all, I currently own an Illiad V1, with very limited capacities (old firmware, too old to upgrade in IDS). I'm considering an offer for an Iliad V2, which comes without charger. Does anyone know if I can use my current V1 charger/hub on a Iliad V2 (Both for charging as for ethernet/USB)? Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Buy WTB wall charger or car charger, Cruz Reader r101	fkeese	Flea Market	1	08-12-2011 02:45 PM
Buy Travel hub and charger for iRex iLiad v2	abq254	Flea Market	4	09-23-2010 01:33 AM
Nintendo DSi charger compatible to Kindle 2?	kic	Amazon Kindle	0	11-22-2009 09:55 AM
AC Charger - Will Any (mini) USB Charger Do?	leeloo	Bookeen	21	02-28-2009 02:29 PM
USB hub	Nate the great	iRex	7	08-23-2007 09:33 AM

12-18-2011, 02:19 AM	#2
ericshliao Guru Posts: 976 Karma: 687 Join Date: Nov 2007 Device: Dell X51v; iLiad v2	Perhaps you can download a firmware image and upgrade iLiad firmware offline.

12-18-2011, 05:14 AM	#3
janzen Member Posts: 15 Karma: 10000 Join Date: Jul 2011 Device: iLiad	You can use the V1 charger on a V2 Iliad, both for charging as for ethernet/USB. There is however hardly, if any difference in capacities between the two versions.

12-27-2011, 06:06 PM	#5
Shaggy Wizard Posts: 4,293 Karma: 529619 Join Date: May 2007 Device: iRex iLiad, DR800SG	The charger should work, there's no difference between the v1 and v2 as far as the charger. iDS seems to be down though, so make sure that the v2 has a current firmware on it. Chances of being able to update it are slim. There's a zip file available that contains the 2.10 firmware. I'm not 100% sure, but I think you could get that and flash your v1 with it (just not sure if there is anything about the 2.7 firmware that would prevent it). The latest firmware is 2.12 though, which isn't easily available now that iDS seems to be gone. The v2 should have at least 2.11 on it, probably 2.12. I'd check with the seller though.

Advert

Advert