01-03-2011, 12:48 AM | #1 | |
Member
Posts: 12
Karma: 10
Join Date: Nov 2010
Device: Archos 7 H.T. Archos 70 Samsung E60
|
loader problem with old Ubuntu Hardy
Hi,
I have read that 0.6.17 work with this old Ubuntu Hardy, but I dont find it; so I have installed the oldest I found on sourceforge, the 0.6.18. sudo LD_DEBUG=libs /opt/calibre/calibre-debug -c "print 1" 2>&1 | less give me this error : Quote:
I also installed python-lxml_2.1.1-2.1_i386.deb but I have the same error. Can you help me ? |
|
01-03-2011, 10:55 AM | #2 |
creator of calibre
Posts: 44,138
Karma: 22670164
Join Date: Oct 2006
Location: Mumbai, India
Device: Various
|
that's a little too old, for anyone to remember. I'd suggest instead trying the newer version. You will need a version of glibc >= 2.10, you can either compile it yourself or google for a precompiled one for Hardy and put it into /opt/calibre/libs
|
Advert | |
|
01-04-2011, 06:42 AM | #3 |
Member
Posts: 12
Karma: 10
Join Date: Nov 2010
Device: Archos 7 H.T. Archos 70 Samsung E60
|
Many thanks for your answer.
I was surely a little tired by the end of years festivities Its not Hardy, but Intrepid... Compile last sources need Python 2.6, I have only 2.4 and 2.5 and dont find any .deb calibre working on Intrepid on the net. |
01-04-2011, 08:10 AM | #4 | |
US Navy, Retired
Posts: 9,865
Karma: 13806776
Join Date: Feb 2009
Location: North Carolina
Device: Icarus Illumina XL HD, Nexus 7
|
Quote:
|
|
01-04-2011, 08:49 AM | #5 |
Grand Sorcerer
Posts: 11,852
Karma: 7035877
Join Date: Jan 2010
Location: Notts, England
Device: Kobo Libra 2
|
I think that Intrepid is too old to run the binary installer. If intrepid was built from Debian Sarge or Lenny, then it certainly is.
At one point I tried to get calibre running on Lenny. I succeeded in getting the content server to run. My guess is that the GUI could have run after installing and configuring the rest of X, but I never tried it as my machine is headless. Some short documentation on what I did is here. Note that setting up a chrooted jail is not your run-of-the-mill configuration chore. If you are not comfortable with the command line and system administration, I suggest you don't attempt it. However, all would be much easier if you upgraded. |
Advert | |
|
01-04-2011, 09:24 AM | #6 | ||
Member
Posts: 12
Karma: 10
Join Date: Nov 2010
Device: Archos 7 H.T. Archos 70 Samsung E60
|
@dwanthny :
Thanks, but of course I have try to install last binary, it dont work, so I try : Quote:
And got the error in my first post above Compiling need : Quote:
(And the current binary version "speak" about Python 2.7) @chaley Thanks, but your "chrooted" solution is very complicated, not flexible. Sure, one "easy"solution is to upgrade Intrepid, but its not so simple, I have many softwares, some of them are not in standard packages, this migration need many, many hours and must be done on 3 computers [sorry, my English is very bad] Last edited by silver84; 01-04-2011 at 09:36 AM. |
||
01-04-2011, 09:28 AM | #7 |
Grand Sorcerer
Posts: 11,852
Karma: 7035877
Join Date: Jan 2010
Location: Notts, England
Device: Kobo Libra 2
|
Well, my guess is that with your constraints, you won't be able use calibre.
|
01-04-2011, 09:46 AM | #8 |
Member
Posts: 12
Karma: 10
Join Date: Nov 2010
Device: Archos 7 H.T. Archos 70 Samsung E60
|
The solution seem to get the 0.6.17 version but I dont find this archive on the net.
|
01-04-2011, 11:00 AM | #9 |
Well trained by Cats
Posts: 30,096
Karma: 57259780
Join Date: Aug 2009
Location: The Central Coast of California
Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A
|
My bad, stops at 6.18
Last edited by theducks; 01-04-2011 at 11:17 AM. |
01-04-2011, 11:34 AM | #10 |
Member
Posts: 12
Karma: 10
Join Date: Nov 2010
Device: Archos 7 H.T. Archos 70 Samsung E60
|
Bingo !
I dont know if its the reason, I have installed Python 2.6 minimal, its here : http://jaredforsyth.com/blog/2009/ja...hon-26-ubuntu/ And now 0.6.18 seem to work ! Now, I will try with newest version of calibre |
01-04-2011, 02:47 PM | #11 | ||
Member
Posts: 12
Karma: 10
Join Date: Nov 2010
Device: Archos 7 H.T. Archos 70 Samsung E60
|
The continuation :
Now calibre seem to work till 6.29 version 6.30 dont work, because it requires glibc 2.9 (Intrepid uses, on my computer, glibc 2.8). Quote:
http://mirrors.kernel.org/ubuntu/pool/main/g/glibc/ This installation need to repair my old libc6 (with glibc 2.8) broken. And now calibre 6.3 dont ask for glibc 2.9, but for glibc 2.10 : Quote:
Since 1979 I never get bored anymore, I use, work with computers Last edited by silver84; 01-04-2011 at 02:50 PM. |
||
Thread Tools | Search this Thread |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ubuntu hardy problem with binary install `Illegal instruction` | lampadena | Calibre | 2 | 02-10-2009 02:57 AM |
Ubuntu Hardy Calibre Problem | vakya | Calibre | 27 | 01-26-2009 04:15 PM |
downloading calibre in ubuntu hardy | ElizabethN | Calibre | 1 | 12-29-2008 12:56 AM |
calibre install fails on Ubuntu hardy | Xpi6 | Calibre | 16 | 11-16-2008 01:29 PM |
New versions of calibre in Ubuntu Hardy 64 Bit | deedward9 | Calibre | 19 | 10-17-2008 11:21 PM |